PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- 6GT2001-0CA10
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6GT2001-0CA10 SLG 43 read/write device
Siemens 6GT2001-0CA10 is a SLG 43 read/write device in the SIMATIC MOBY I. It is used to perform the documented SLG 43 read/write device function in the installed automation equipment.
Its documented configuration includes device family of MOBY I, read/write device of SLG 43, enclosure protection of IP65, and operating temperature of -25 to +70 °C. During operation, the SLG 43 read/write device performs its assigned SLG 43 read/write device function through the documented power, signal and communication interfaces.
Its documented configuration includes device family of MOBY I, read/write device of SLG 43, enclosure protection of IP65, and operating temperature of -25 to +70 °C. During operation, the SLG 43 read/write device performs its assigned SLG 43 read/write device function through the documented power, signal and communication interfaces.
BEFORE YOU BUY
Confirm the complete SLG 43 read/write device
ACTUAL APPLICATIONS
Application context for 6GT2001-0CA10
The applications below show typical industry settings, application scenarios, application areas and equipment for 6GT2001-0CA10. Confirm the exact SIMATIC MOBY I configuration before use.
-
01 · CHEMICAL PROCESSING
Reactor and separation instrumentation
Process equipmentTransmitters and analyzersControl valves and shutdown devices -
02 · POWER GENERATION
Boiler and turbine auxiliary instrumentation
Plant equipmentBoiler feed pumps and dampersTurbine auxiliary valves and motors -
03 · WATER & WASTEWATER
Pumping and filtration instrumentation
Treatment equipmentLevel and flow transmittersPumps, valves and filter drives
Technical specifications for 6GT2001-0CA10
-
Product Model6GT2001-0CA10
-
Product ParametersSLG 43 read/write device
-
In stock1 unit
-
ManufacturerSiemens
-
Device FamilyMOBY I
-
Read/Write DeviceSLG 43
-
Enclosure ProtectionIP65
-
Operating Temperature-25 to +70 °C
-
Housing Size238 x 40 x 80 mm
-
Maximum Reading Distance150 mm
-
Distance ConditionDepends on MDS
-
Lifecycle ClassificationSpare part
View all additional
Alternative Names
6GT2001-0CA10
6GT2001 0CA10
SIMATIC MOBY I SLG 43 read/write device
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 6GT2001-0CA10 to the installed SIMATIC MOBY I
Siemens 6GT2001-0CA10 is a SLG 43 read/write device for the SIMATIC MOBY I. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare operating temperature (-25 to +70 °C), housing size (238 x 40 x 80 mm) and maximum reading distance (150 mm) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 6GT2001-0CA10
- Product class: SLG 43 read/write device
- Family: SIMATIC MOBY I
The Siemens 6GT2001-0CA10 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 6GT2001-0CA10 identity before exchange
Replace 6GT2001-0CA10 only after matching the complete article code, SLG 43 read/write device, installed SIMATIC MOBY I role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 6GT2001-0CA10
- Product class: SLG 43 read/write device
- Family check: SIMATIC MOBY I
The Siemens 6GT2001-0CA10 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6GT2001-0CA10
- Product family: SIMATIC MOBY I
- Exact Siemens identity required before service
Documentation for Siemens 6GT2001-0CA10 must match the installed equipment; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size16.0 x 13.0 x 6.0 cm
-
Shipping weight0.40 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538909190
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6GT2001-0CA10
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which device family confirms the correct 6GT2001-0CA10?
Match the complete 6GT2001-0CA10 label and verify device family is MOBY I before accepting the SLG 43 read/write device. -
What must engineering check around read/write device?
For 6GT2001-0CA10, compare read/write device (SLG 43) with the installed wiring, host hardware and controlled project. -
Can another SIMATIC MOBY I article replace this unit?
Do not select a substitute from appearance alone. Compare 6GT2001-0CA10, device family, read/write device, connectors, firmware and the saved configuration. -
Which records protect the existing enclosure protection setup?
Before removing 6GT2001-0CA10, photograph labels and connections, then save configuration evidence associated with enclosure protection (IP65). -
How should the SLG 43 read/write device be inspected on arrival?
Inspect 6GT2001-0CA10 for the exact article marking, connector damage, bent hardware, missing accessories and transport damage before disturbing the installed spare. -
Which functional test follows the 6GT2001-0CA10 exchange?
Restore the approved setup, review diagnostics and test the affected SIMATIC MOBY I signal, network, control or drive path at a safe operating point. -
What data should a distributor quote for this configuration?
Provide 6GT2001-0CA10, quantity, nameplate photographs, installed SIMATIC MOBY I system, required interfaces and destination country. -
How can MRO avoid receiving the wrong hardware revision?
Ask the supplier to confirm the full 6GT2001-0CA10 identity, visible revision, device family and connector layout against photographs before shipment.
READY TO VERIFY YOUR PART?
Get a 6GT2001-0CA10 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
