PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- 6SL3210-5FB10-1UF1
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SL3210-5FB10-1UF1 SINAMICS V90 PN 0.1 kW Servo Drive
Siemens 6SL3210-5FB10-1UF1 is the 0.1 kW SINAMICS V90 PN servo drive with a PROFINET interface. It belongs to the 200 V drive variant and supplies a rated output current of 1.2 A, with a maximum 3.6 A output current. The control connections include four standard digital inputs and two digital outputs.
The drive is specified for a 200 to 240 V AC supply with -15% to +10% voltage tolerance and a nominal 50/60 Hz frequency. Its output frequency range is 0 to 330 Hz. The IP20/UL open-type construction uses natural convection and is specified for operation from 0 to +45 degrees C, with storage from -40 to +70 degrees C.
The drive is specified for a 200 to 240 V AC supply with -15% to +10% voltage tolerance and a nominal 50/60 Hz frequency. Its output frequency range is 0 to 330 Hz. The IP20/UL open-type construction uses natural convection and is specified for operation from 0 to +45 degrees C, with storage from -40 to +70 degrees C.
BEFORE YOU BUY
Confirm the complete 6SL3210-5FB10-1UF1 identity
ACTUAL APPLICATIONS
Application fields for 6SL3210-5FB10-1UF1
These broad application fields reflect the documented function and technical characteristics of 6SL3210-5FB10-1UF1.
-
01 · OIL & GAS
Petroleum, Natural Gas and Industrial Energy
Petroleum and natural gas with industrial energyOil and gas and renewable energy -
02 · PULP & PAPER
Pulp, Paper and Thermal Electricity
Pulp and paper and thermal electricityPulp and industrial wastewater and water -
03 · PHARMACEUTICALS
Pharmaceuticals and Public Healthcare
Pharmaceuticals and general public healthcarePharmacy and general public health
Technical specifications for 6SL3210-5FB10-1UF1
-
Product Model6SL3210-5FB10-1UF1
-
Product ParametersSINAMICS V90 PN 0.1 kW Servo Drive
-
In stock1 unit
-
ManufacturerSiemens
-
Rated motor power0.1 kW
-
Rated output current1.2 A
-
Maximum output current3.6 A
-
Supply voltage200 to 240 V AC
-
Permitted voltage tolerance-15% to +10%
-
Nominal supply frequency50 / 60 Hz
-
Output frequency0 to 330 Hz
-
Standard digital inputs4
-
Digital outputs2
-
Control interfacePROFINET
-
Degree of protectionIP20 / UL open type
-
CoolingNatural convection
-
Operating temperature0 to +45 degrees C
-
Storage temperature-40 to +70 degrees C
-
Maximum operating relative humidity90%
View all additional
Alternative Names
6SL3210-5FB10-1UF1
SINAMICS V90 PN
SINAMICS V90 PN 0.1 kW Servo Drive
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6SL3210-5FB10-1UF1 within SINAMICS V90 PN
Match the V90 PN drive to the compatible SIMOTICS motor and feedback arrangement using the 200 V selection tables. Configure the PROFINET device and axis data in the intended motion project. The complete -1UF1 order code distinguishes this PN drive from pulse-train and other voltage or power variants.
Follow the supply, motor, encoder and control-terminal assignments in the V90 PN operating instructions. Install the documented branch protection and protective-earth connection, and preserve the required separation and shielding of power and feedback cables. Account for both rated and maximum output current when assessing the selected motor duty.
Use the approved commissioning procedure to enter motor data and check control direction, limits and stop behavior. Maintain the mounting clearances needed for natural-convection cooling and the protected environment required by the open-type enclosure. Test the axis in a controlled state before enabling the normal motion sequence.
Features:
- Rated motor power: 0.1 kW
- Rated output current: 1.2 A
- SINAMICS V90 PN
Use 6SL3210-5FB10-1UF1 only within the documented SINAMICS V90 PN arrangement and applicable installation instructions.
INTERCHANGEABILITY
Replace 6SL3210-5FB10-1UF1 within SINAMICS V90 PN
Save the axis project, drive parameters and PROFINET settings before exchange. Record the motor and encoder codes with the complete drive article number. A drive with a similar power rating but a different control interface or suffix must not inherit the existing project without a documented compatibility check.
Isolate the supply and follow the specified discharge waiting and verification procedure before disconnecting power or motor wiring. Label the encoder, motor and control cables and inspect the protective-earth connection. Fit the matching replacement in the documented orientation and preserve the original cooling clearances.
Restore the validated configuration, establish PROFINET access and inspect drive diagnostics before enabling the motor. Check feedback direction, low-speed movement and the required stops with the axis secured. Verify motor current and motion limits under controlled conditions before returning the axis to the operating sequence.
Features:
- 6SL3210-5FB10-1UF1 complete order code
- Maximum operating relative humidity: 90%
- Retain the documented SINAMICS V90 PN connection arrangement
Use 6SL3210-5FB10-1UF1 only within the documented SINAMICS V90 PN arrangement and applicable installation instructions.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Exact-model technical data for 6SL3210-5FB10-1UF1
- Document applicability checked against the complete identity
- Directory links by subcategory and brand
Documentation for 6SL3210-5FB10-1UF1 must match the installed product identity and supplied configuration.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Product size4.50 x 17.00 x 17.00 cm
-
Net weight1.10 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8504409999
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SL3210-5FB10-1UF1
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What power is assigned to 6SL3210-5FB10-1UF1?
6SL3210-5FB10-1UF1 is the 0.1 kW SINAMICS V90 PN servo drive. -
What output current is specified for 6SL3210-5FB10-1UF1?
6SL3210-5FB10-1UF1 lists 1.2 A rated and 3.6 A maximum output current. -
Is 6SL3210-5FB10-1UF1 the pulse-train version?
No. 6SL3210-5FB10-1UF1 is the PROFINET, or PN, version of the V90 drive. -
What voltage class applies to 6SL3210-5FB10-1UF1?
6SL3210-5FB10-1UF1 is a 200 to 240 V AC drive with -15% to +10% permitted voltage tolerance. -
How many standard digital inputs does 6SL3210-5FB10-1UF1 have?
6SL3210-5FB10-1UF1 lists four standard digital inputs and two digital outputs. -
What cooling arrangement is specified for 6SL3210-5FB10-1UF1?
6SL3210-5FB10-1UF1 uses natural convection; preserve the mounting clearances in the operating instructions. -
What should a distributor retain in an 6SL3210-5FB10-1UF1 quotation?
Retain the entire 6SL3210-5FB10-1UF1 suffix and identify the PN interface, motor pairing and supplied connectors or accessories. -
Which files help assess an 6SL3210-5FB10-1UF1 replacement?
Provide the 6SL3210-5FB10-1UF1 axis project, drive parameters, motor and encoder identifiers, and PROFINET settings.
READY TO VERIFY YOUR PART?
Get a 6SL3210-5FB10-1UF1 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
6SL3210-5FB10-1UF1SINAMICS V90 PN 0.1 kW Servo DriveManufacturer: SiemensView Details
-
3RK1400-1MQ00-0AA3K60 Four-Input Two-Output AS-i ModuleManufacturer: SiemensView Details
-
6SE6420-2UC17-5AA1MICROMASTER 420 0.75 kW InverterManufacturer: SiemensView Details
-
FCL2001-A1FDnet C-NET Line CardManufacturer: SiemensView Details
-
4000098-516Termination interface cableManufacturer: InvensysView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
