PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- 6SL3244-0BA20-1BA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SL3244-0BA20-1BA0 USS Drive Control Unit
Siemens 6SL3244-0BA20-1BA0 is an uss drive control unit in the SINAMICS G120 CU240S range. It is used for configured G120 motor-drive control with RS485/USS communication in compatible industrial automation projects.
The CU240S controls the compatible G120 Power Module and provides RS485/USS communication, configurable I/O and an encoder interface. It supports documented drive and command data sets, speed-control functions and the applicable motor-temperature input. This standard CU240S execution does not provide the integrated safety functions of CU240S DP-F or PN-F variants.
The CU240S controls the compatible G120 Power Module and provides RS485/USS communication, configurable I/O and an encoder interface. It supports documented drive and command data sets, speed-control functions and the applicable motor-temperature input. This standard CU240S execution does not provide the integrated safety functions of CU240S DP-F or PN-F variants.
BEFORE YOU BUY
Confirm the complete uss drive control unit
ACTUAL APPLICATIONS
Application context for 6SL3244-0BA20-1BA0
6SL3244-0BA20-1BA0 is an uss drive control unit for SINAMICS G120 CU240S. Its industrial scope includes metals production, pulp and paper, industrial manufacturing. Use depends on the compatible system, connected equipment and documented operating limits.
-
01 · METALS PRODUCTION
Metal Production and Materials Processing
Industrial Metal Production ProcessesSteel Production Process Automation -
02 · PULP & PAPER
Pulp Processing and Paper Production
Pulp Preparation and ProcessingPaper Production and Converting -
03 · INDUSTRIAL MANUFACTURING
Industrial Assembly and Component Production
Industrial Component Manufacturing ProcessesAutomated Assembly and Production
Technical specifications for 6SL3244-0BA20-1BA0
-
Product Model6SL3244-0BA20-1BA0
-
Product ParametersUSS Drive Control Unit
-
In stock10 units
-
ManufacturerSiemens
-
Operating supply24 V DC through Power Module or external supply
-
Maximum current draw0.5 A at 24 V
-
Full-load power lossLess than 5.5 W
-
Standard digital inputs9
-
Digital output count3
-
Analog input count2
-
Analog output count2, non-isolated
-
Fieldbus interfaceRS485/USS
-
Encoder interfaces1
-
Fixed-frequency presets16 configurable
-
Drive data sets3 selectable DDS
-
Command data sets3 selectable CDS
-
Ingress protectionIP20
-
Operating ambient−10–50 ℃
-
Storage ambient−40–70 ℃
View all additional
Alternative Names
6SL3244-0BA20-1BA0
SINAMICS G120 CU240S USS Drive Control Unit
G120 CU240S 24 V DC through Power Module or external supply operating supply
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6SL3244-0BA20-1BA0 uss drive control unit
Integrate 6SL3244-0BA20-1BA0 only in the documented SINAMICS G120 CU240S configuration. Match the installed interfaces and the engineered application before selecting this uss drive control unit.
The CU240S controls the compatible G120 Power Module and provides RS485/USS communication, configurable I/O and an encoder interface. It supports documented drive and command data sets, speed-control functions and the applicable motor-temperature input. This standard CU240S execution does not provide the integrated safety functions of CU240S DP-F or PN-F variants.
Use the applicable controlled instructions for SINAMICS G120 CU240S. Validate the assigned signals, communication or output behaviour and retain the accepted configuration for 6SL3244-0BA20-1BA0.
Features:
- Operating supply: 24 V DC through Power Module or external supply
- Maximum current draw: 0.5 A at 24 V
- Full-load power loss: Less than 5.5 W
The 6SL3244-0BA20-1BA0 uss drive control unit requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 6SL3244-0BA20-1BA0 uss drive control unit
Confirm the complete 6SL3244-0BA20-1BA0 identity and installed SINAMICS G120 CU240S execution before replacement. Compare the connector arrangement and the technical values required by the existing project.
Record the uss drive control unit connections, project settings and associated accessories. Preserve the accepted configuration and isolate the affected circuits before exchange.
After fitting 6SL3244-0BA20-1BA0, restore the verified configuration and test every affected function. Retain the identification, diagnostic results and final acceptance record for the SINAMICS G120 CU240S equipment.
Features:
- Operating supply: 24 V DC through Power Module or external supply
- Maximum current draw: 0.5 A at 24 V
- Full-load power loss: Less than 5.5 W
The 6SL3244-0BA20-1BA0 uss drive control unit requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 6SL3244-0BA20-1BA0 uss drive control unit must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size7.3 × 17.7 × 6.3cm
-
Shipping weight0.52kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8504909000
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SL3244-0BA20-1BA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How is the standard CU240S supplied with 24 V DC?
For 6SL3244-0BA20-1BA0, the documented operating supply is 24 V DC through Power Module or external supply. -
What maximum current is drawn by CU240S from its 24 V supply?
For 6SL3244-0BA20-1BA0, the documented maximum current draw is 0.5 A at 24 V. -
What full-load power loss is specified for CU240S?
For 6SL3244-0BA20-1BA0, the documented full-load power loss is Less than 5.5 W. -
How many standard digital inputs belong to CU240S?
For 6SL3244-0BA20-1BA0, the documented standard digital inputs is 9. -
How many digital outputs are provided by the standard CU?
For 6SL3244-0BA20-1BA0, the documented digital output count is 3. -
How many analog input channels can CU240S evaluate?
For 6SL3244-0BA20-1BA0, the documented analog input count is 2. -
What identification supports ordering the SINAMICS G120 CU240S spare?
Specify 6SL3244-0BA20-1BA0, quantity and the installed SINAMICS G120 CU240S arrangement. Include label and connector photographs, and identify any required accessories separately. -
Which incoming checks apply to the uss drive control unit?
Compare the 6SL3244-0BA20-1BA0 label, connector condition and supplied accessories with the quotation. Verify the accepted SINAMICS G120 CU240S configuration before replacing the installed item.
READY TO VERIFY YOUR PART?
Get a 6SL3244-0BA20-1BA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
