PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- A5E00714562
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
A5E00714562 IGD2 R4 driver board
Siemens A5E00714562 is a IGD2 R4 driver board for the SINAMICS power-block repair parts. It is used to drives igbt switching devices. Confirm the complete article number, installed drive, electrical class, interfaces and cooling arrangement before ordering.
BEFORE YOU BUY
Confirm the complete IGD2 R4 driver board
ACTUAL APPLICATIONS
Application context for A5E00714562
Manufacturer documentation places the Igd2 R4 Driver Board in practical drive applications. The three cases below describe different operating tasks in which A5E00714562 performs its documented product-family role with the configured companion equipment.
-
01 · AUTOMOTIVE
Balance robotic joining with Igd2 R4 process control
Within the robots, fixtures and clamp groups, A5E00714562 serves its documented function as a Igd2 R4 Driver Board. During station restart, the system uses this function to confirm tooling readiness before the cycle starts, helping it prevent an incomplete joining cycle. -
02 · PLASTICS & PACKAGING
Regulate carton forming with Igd2 R4 process control
During operation of the blank feeders and folding stations, A5E00714562 supports the configured automation role as a Igd2 R4 Driver Board. During registration correction, the system uses this function to apply the selected format to the machine sequence, helping it produce the intended package geometry. -
03 · PULP & PAPER
Balance reel and winder operation with Igd2 R4
During operation of the reels, slitters and winding drums, A5E00714562 performs its assigned control role as a Igd2 R4 Driver Board. During roll change, the system uses this function to synchronize winding torque with roll diameter, helping it build a roll with controlled tension.
Technical specifications for A5E00714562
-
Product ModelA5E00714562
-
Product ParametersIGD2 R4 driver board
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassIGD2/R4 driver board
-
Drive FamilySINAMICS power blocks
-
Primary FunctionDrives IGBT switching devices
-
Power ArchitectureIGD2/R4 gate-drive architecture
-
Voltage Class400–690 V AC drive class
-
Current RatingUp to 400 A
-
Control SupplyIsolated gate-control supply
-
Power SectionPower-block gate section
-
Mechanical DesignFS450R12KE3-S1 board group
-
Electrical InterfaceInternal IGBT gate leads
-
Cooling IntegrationBaseplate-cooled power assembly
-
Board DesignationA5E00714562 IGD2/R4
-
Service RolePower-block repair component
-
Product StatusSuperseded service board
-
Commissioning CheckMatch FS450 device positions
View all additional
Alternative Names
A5E00714562
SINAMICS power-block repair parts IGD2 R4 driver board
Siemens IGD2 R4 driver board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match A5E00714562 to the installed SINAMICS power-block repair parts
Siemens A5E00714562 is a IGD2 R4 driver board used in the SINAMICS power-block repair parts.
Confirm voltage class, current rating, section position, interfaces and cooling arrangement before integration.
Use qualified drive-service personnel and follow the applicable Siemens safety, discharge and commissioning procedure.
Features:
- Exact product identity: A5E00714562
- Product class: IGD2 R4 driver board
- Family: SINAMICS power-block repair parts
The Siemens A5E00714562 requires documented system integration before energising the drive.
REPLACEMENT CONTROL
Verify the complete A5E00714562 identity before exchange
Replace A5E00714562 only after matching the full article number, voltage class, module section and connector arrangement.
Photograph every busbar, plug, gate lead, cooling connection and protective-earth point before removal.
After installation, inspect clearances and insulation, restore power in the Siemens sequence and test the affected drive function.
Features:
- Match exact A5E00714562 identity
- Confirm power-section and phase position
- Complete insulation and functional tests
The Siemens A5E00714562 requires documented replacement verification before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical values prepared for A5E00714562
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens A5E00714562 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size43.5 × 15 × 3.5 cm
-
Shipping weight2.1 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about A5E00714562
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which IGBT assembly is paired with A5E00714562?
This IGD2/R4 board is associated with the FS450R12KE3-S1 power-device group. -
What current range should be confirmed for this driver board?
The installed application is rated up to approximately 400 A and must match the power-block nameplate. -
Why is the IGD2/R4 suffix necessary for identification?
It distinguishes the gate-drive architecture and revision from visually similar Siemens power-block boards. -
How should both FS450 device positions be documented?
Photograph each gate lead, feedback plug and physical position before separating the board from the power block. -
What damage should be checked after an IGBT event?
Inspect gate resistors, isolation components, connectors and board tracks before installing A5E00714562. -
Can A5E36717803 be assumed to be a direct substitute?
A successor or related number still requires written confirmation of the drive, current class, revision and connector arrangement. -
What handling method protects this 43.5 cm board?
Use ESD protection, support the complete board length and keep pressure away from components and gate terminals. -
How are the repaired IGBT channels commissioned?
Verify insulation and gate signals, then test both affected power paths while monitoring current balance and diagnostics.
READY TO VERIFY YOUR PART?
Get a A5E00714562 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
