PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- A5E00825002
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
A5E00825002 IGD1 driver board
Siemens A5E00825002 is a IGD1 driver board used in the SINAMICS power-block electronics. It controls igbt gate firing in the installed power block and must be matched to the documented electrical class, installed section and connector arrangement.
Before replacement, verify the complete article number, board revision, 480 V AC / 650 V DC class, 260 A power-block class, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
Before replacement, verify the complete article number, board revision, 480 V AC / 650 V DC class, 260 A power-block class, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
BEFORE YOU BUY
Confirm the complete IGD1 driver board
ACTUAL APPLICATIONS
Application context for A5E00825002
Manufacturer documentation places the Igd1 Driver Board in practical drive applications. The three cases below describe different operating tasks in which A5E00825002 performs its documented product-family role with the configured companion equipment.
-
01 · PULP & PAPER
Verify dryer-section control during moisture correction
In the automation chain for the steam groups and dryer drives, A5E00825002 operates in its approved product-family role as a Igd1 Driver Board. During moisture correction, the system uses this function to align thermal and drive response with the running sheet, helping it support the target moisture profile. -
02 · PLASTICS & PACKAGING
Protect web transport during format change process control
In the automation chain for the unwinders, dancers and pull rolls, A5E00825002 provides its specified system function as a Igd1 Driver Board. During format change, the system uses this function to synchronize the driven sections with product position, helping it protect web tension and print registration. -
03 · AUTOMOTIVE
Support body transfer during model change process control
As part of the skid conveyors and lift stations, A5E00825002 operates in its approved product-family role as a Igd1 Driver Board. During model change, the system uses this function to coordinate motion requests and station interlocks, helping it keep the assembly takt moving.
Technical specifications for A5E00825002
-
Product ModelA5E00825002
-
Product ParametersIGD1 driver board
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassIGD1 driver board
-
Drive FamilySINAMICS power-block electronics
-
Primary FunctionControls IGBT gate firing in the installed power block
-
Power ArchitectureIGD1/R3 gate-drive stage
-
Voltage Class480 V AC / 650 V DC class
-
Current Rating260 A power-block class
-
Power SectionPower-block driver section
-
Mechanical DesignIGBT driver-board assembly
-
Electrical InterfaceInternal gate and feedback plugs
-
Commissioning CheckConfirm IGBT identity, polarity and isolation
View all additional
Alternative Names
A5E00825002
SINAMICS power-block electronics IGD1 driver board
Siemens IGD1 driver board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match A5E00825002 to the installed SINAMICS power-block electronics
Siemens A5E00825002 is an IGD1 driver board used in the SINAMICS power-block electronics to control IGBT gate firing in the installed power block. Its igd1/r3 gate-drive stage role must match the documented drive configuration, section assignment and controlled hardware arrangement.
Before integration, confirm 480 V AC / 650 V DC class, 260 A power-block class, the power-block driver section, igbt driver-board assembly and internal gate and feedback plugs. Compare the complete article and connector orientation with the installed equipment and Siemens documentation.
Use qualified drive-service personnel, apply the site lockout procedure, observe the specified discharge time and use ESD protection. Complete confirm igbt identity, polarity and isolation, then review diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: A5E00825002
- Function: Controls IGBT gate firing in the installed power block
- Family: SINAMICS power-block electronics
The Siemens A5E00825002 requires documented system integration and a recorded functional test before energising the drive.
REPLACEMENT CONTROL
Verify the complete A5E00825002 identity before exchange
Treat A5E00825002 as a configuration-specific IGD1 driver board for the SINAMICS power-block electronics. Match the complete Siemens article number, installed power-block driver section, board or module revision, mechanical design and approved replacement record before removal.
Photograph internal gate and feedback plugs, connector keying, cable labels, shielding, protective earth, adjacent assemblies and the installed section position. Preserve the documented igbt driver-board assembly and any cooling or discharge provisions while the drive is isolated.
After installation, confirm igbt identity, polarity and isolation. Restore only the approved parameters and interfaces, review Siemens diagnostics, test the affected power or control path at a controlled operating point, and retain the article identity and test results in the maintenance record.
Features:
- Exact article: A5E00825002
- Installed section: Power-block driver section
- Release check: Confirm IGBT identity, polarity and isolation
The Siemens A5E00825002 requires documented replacement verification and a recorded functional test before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Technical values prepared for A5E00825002
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens A5E00825002 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size27.7 × 15 × 1.8 cm
-
Shipping weight0.2 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about A5E00825002
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What operating role does the 260 A IGD1 driver board perform?
In A5E00825002, the documented role is to controls igbt gate firing in the installed power block within the SINAMICS power-block electronics; confirm the complete nameplate and power-block driver section before ordering. -
Does the 260 A IGD1 driver board match the documented voltage requirement?
For A5E00825002, compare 480 V AC / 650 V DC class with the converter nameplate, power architecture and controlled Siemens documentation. -
Which internal gate and feedback plugs details identify the 260 A IGD1 driver board?
Before removing A5E00825002, capture connector keys, adjacent assemblies, cable routing, grounding points and the board revision. -
How is the 260 A power-block class rating of the 260 A IGD1 driver board verified?
Use the installed converter rating and Siemens documentation; visual similarity to another board is insufficient for A5E00825002. -
What isolation procedure applies to the 260 A IGD1 driver board power architecture?
Isolate every energy source, observe the Siemens discharge time, prove absence of voltage and apply the site lockout procedure before handling A5E00825002. -
What should be inspected on the 260 A IGD1 driver board at receipt?
Inspect the A5E00825002 label, coating, connectors, bent pins, contamination, transport damage and supplied protective packing. -
Which commissioning result releases the 260 A IGD1 driver board to service?
For A5E00825002: Confirm IGBT identity, polarity and isolation. Also record insulation checks, drive diagnostics, functional results and the final hardware revision before release. -
Which site records confirm the 260 A IGD1 driver board configuration?
Send the A5E00825002 nameplate, installed converter type, power-block driver section photos, quantity, fault symptoms and delivery destination.
READY TO VERIFY YOUR PART?
Get a A5E00825002 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
