PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- A5E30947477-H4
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
A5E30947477-H4 Auxiliary power supply module
Siemens A5E30947477-H4 is a Auxiliary power supply module used in the SINAMICS converter systems. It generates regulated control voltages for drive electronics and must be matched to the documented electrical class, installed section and connector arrangement.
Before replacement, verify the complete article number, board revision, 24 V DC control input, Board-defined output load, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
Before replacement, verify the complete article number, board revision, 24 V DC control input, Board-defined output load, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
BEFORE YOU BUY
Confirm the complete Auxiliary power supply module
ACTUAL APPLICATIONS
Application context for A5E30947477-H4
Manufacturer documentation places the Auxiliary Power Supply Module in practical power applications. The three cases below describe different operating tasks in which A5E30947477-H4 performs its documented product-family role with the configured companion equipment.
-
01 · POWER GENERATION
Sequence cooling-water circulation with Auxiliary Power
At the control layer of the circulating pumps and heat exchangers, A5E30947477-H4 handles its designated signal or control duty as a Auxiliary Power Supply Module. During controlled shutdown, the system uses this function to sequence redundant equipment around the operating unit, helping it keep heat rejection available to the process. -
02 · AUTOMOTIVE
Regulate powertrain assembly during quality-hold release
As part of the machining cells and pallet systems, A5E30947477-H4 supports the configured automation role as a Auxiliary Power Supply Module. During quality-hold release, the system uses this function to hand off part identity with the machine sequence, helping it retain traceability at the next operation. -
03 · FOOD & BEVERAGE
Stabilize clean-in-place transfer during sanitation transition
In the automation chain for the CIP supply and return headers, A5E30947477-H4 performs its assigned control role as a Auxiliary Power Supply Module. During sanitation transition, the system uses this function to coordinate valve paths and pump availability, helping it complete sanitation without cross-routing product.
Technical specifications for A5E30947477-H4
-
Product ModelA5E30947477-H4
-
Product ParametersAuxiliary power supply module
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassAuxiliary power supply module
-
Drive FamilySINAMICS converter systems
-
Primary FunctionGenerates regulated control voltages for drive electronics
-
Power ArchitectureSwitched-mode auxiliary supply
-
Voltage Class24 V DC control input
-
Current RatingBoard-defined output load
-
Power SectionControl power section
-
Mechanical DesignPlug-in supply assembly
-
Electrical InterfaceInput, output and feedback connectors
-
Commissioning CheckMeasure rails, ripple and thermal condition
View all additional
Alternative Names
A5E30947477 H4
SINAMICS converter systems Auxiliary power supply module
Siemens H4 power supply module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match A5E30947477-H4 to the installed SINAMICS converter systems
Siemens A5E30947477-H4 is an Auxiliary power supply module used in the SINAMICS converter systems to generate regulated control voltages for drive electronics. Its switched-mode auxiliary supply role must match the documented drive configuration, section assignment and controlled hardware arrangement.
Before integration, confirm 24 V DC control input, Board-defined output load, the control power section, plug-in supply assembly and input, output and feedback connectors. Compare the complete article and connector orientation with the installed equipment and Siemens documentation.
Use qualified drive-service personnel, apply the site lockout procedure, observe the specified discharge time and use ESD protection. Complete measure rails, ripple and thermal condition, then review diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: A5E30947477-H4
- Function: Generates regulated control voltages for drive electronics
- Family: SINAMICS converter systems
The Siemens A5E30947477-H4 requires documented system integration and a recorded functional test before energising the drive.
REPLACEMENT CONTROL
Verify the complete A5E30947477-H4 identity before exchange
Treat A5E30947477-H4 as a configuration-specific Auxiliary power supply module for the SINAMICS converter systems. Match the complete Siemens article number, installed control power section, board or module revision, mechanical design and approved replacement record before removal.
Photograph input, output and feedback connectors, connector keying, cable labels, shielding, protective earth, adjacent assemblies and the installed section position. Preserve the documented plug-in supply assembly and any cooling or discharge provisions while the drive is isolated.
After installation, measure rails, ripple and thermal condition. Restore only the approved parameters and interfaces, review Siemens diagnostics, test the affected power or control path at a controlled operating point, and retain the article identity and test results in the maintenance record.
Features:
- Exact article: A5E30947477-H4
- Installed section: Control power section
- Release check: Measure rails, ripple and thermal condition
The Siemens A5E30947477-H4 requires documented replacement verification and a recorded functional test before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Technical values prepared for A5E30947477-H4
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens A5E30947477-H4 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size28 × 18 × 5 cm
-
Shipping weight0.7 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about A5E30947477-H4
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Where does engineering apply A5E30947477-H4 for control rail generation in SINAMICS converter systems?
Use A5E30947477-H4 only for generates regulated control voltages for drive electronics in the documented SINAMICS converter systems. Engineering must confirm the installed control power section, 24 V DC control input and controlled drawing before work. -
What symptoms should maintenance record before blaming A5E30947477-H4 for a supply feedback loop fault?
For A5E30947477-H4, review drive alarms, DC-link or supply readings, command status, input, output and feedback connectors and the physical condition of the H4 power supply module. Compare results with a known-good channel where the site procedure permits. -
Which wiring and hardware records are needed before a A5E30947477-H4 replacement?
Before removing A5E30947477-H4, save parameters where applicable and photograph the plug-in supply assembly, connector keys, cable labels, shield and protective-earth routes, adjacent assemblies and full nameplate. -
Which post-replacement tests release the H4 power supply module back to service?
After installation, measure rails, ripple and thermal condition. Maintenance should then review diagnostics, prove the thermal output test under controlled conditions and record the final result before production release. -
Which order-code details distinguish A5E30947477-H4 as the correct H4 power supply module?
Match the complete A5E30947477-H4 article, H4 power supply module, 24 V DC control input, Board-defined output load, hardware suffix and installed SINAMICS converter systems configuration. A similar appearance or shortened article number is insufficient. -
What should a distributor disclose about the condition and revision of A5E30947477-H4?
The offer for A5E30947477-H4 should state label revision, new or surplus condition, visible inspection result and whether connectors, memory, software, manuals or other accessories are included. Unlisted accessories are excluded. -
Which delivery details should appear on a quotation for A5E30947477-H4?
For A5E30947477-H4, request confirmed stock status, dispatch time, ship-from location, packed size, shipping weight and courier options. The written quotation controls the final delivery terms. -
What paperwork should procurement request with the H4 power supply module?
A A5E30947477-H4 quotation should identify the supplied Data Sheet and Installation Instructions, 12-month AMIKON warranty, HS reference, origin, return conditions and any document or licence limitations.
READY TO VERIFY YOUR PART?
Get a A5E30947477-H4 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
-
-
2711PC-T10C4D8/APanelView Plus Compact 1000 Terminal Ser AManufacturer: Allen-BradleyView Details -
-
-
-
-
-
-
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
