PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- A5E00825004
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
A5E00825004 IGD1 R3 driver board
Siemens A5E00825004 is a IGD1 R3 driver board for the SINAMICS power-block repair parts. It is used to controls power semiconductor gates. Confirm the exact article, electrical class, interfaces, companion hardware and cooling arrangement before ordering.
BEFORE YOU BUY
Confirm the complete IGD1 R3 driver board
ACTUAL APPLICATIONS
Application context for A5E00825004
Manufacturer documentation places the Igd1 R3 Driver Board in practical drive applications. The three cases below describe different operating tasks in which A5E00825004 performs its documented product-family role with the configured companion equipment.
-
01 · WATER & WASTEWATER
Protect aeration-blower output with Igd1 R3 process control
Inside the blower motors, air headers and oxygen-control loops, A5E00825004 handles its designated signal or control duty as a Igd1 R3 Driver Board. During oxygen-setpoint change, the system uses this function to coordinate blower speed with the required air delivery, helping it match aeration energy to treatment demand. -
02 · OIL & GAS
Coordinate loading-pump operation with Igd1 R3
For the coordinated operation of the transfer pumps, flow meters and loading headers, A5E00825004 handles its designated signal or control duty as a Igd1 R3 Driver Board. During transfer-rate adjustment, the system uses this function to regulate pump speed from the transfer target, helping it keep product flow inside the agreed operating range. -
03 · PLASTICS & PACKAGING
Observe palletizing with Igd1 R3 process control
During operation of the case conveyors and robot cells, A5E00825004 serves its documented function as a Igd1 R3 Driver Board. During product-gap recovery, the system uses this function to restore coordinated flow after a controlled stop, helping it return the line to stable throughput.
Technical specifications for A5E00825004
-
Product ModelA5E00825004
-
Product ParametersIGD1 R3 driver board
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassIGD1 R3 driver board
-
Drive FamilySINAMICS power-block repair parts
-
Primary FunctionControls power semiconductor gates
-
Power ArchitectureIGD1/R3 gate-drive stage
-
Voltage ClassInstalled power-block class
-
Current RatingIGBT-defined current rating
-
Control SupplyIsolated gate-control supply
-
Power SectionPower-block firing section
-
Mechanical DesignDriver board with IGBT set
-
Electrical InterfaceInternal gate and feedback plugs
-
Cooling IntegrationBaseplate-cooled power assembly
-
Board DesignationA5E00825004 IGD1/R3
-
Service RolePower-block repair component
-
Product StatusDiscontinued Siemens spare
-
Commissioning CheckVerify IGBT identity and gate polarity
View all additional
Alternative Names
A5E00825004
SINAMICS power-block repair parts IGD1 R3 driver board
Siemens IGD1 R3 driver board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match A5E00825004 to the installed SINAMICS power-block repair parts
Siemens A5E00825004 is a IGD1 R3 driver board used in the SINAMICS power-block repair parts.
Confirm voltage class, current rating, section position, interfaces and cooling arrangement before integration.
Use qualified drive-service personnel and follow the applicable Siemens safety, discharge and commissioning procedure.
Features:
- Exact product identity: A5E00825004
- Product class: IGD1 R3 driver board
- Family: SINAMICS power-block repair parts
The Siemens A5E00825004 requires documented system integration before energising the drive.
REPLACEMENT CONTROL
Verify the complete A5E00825004 identity before exchange
Replace A5E00825004 only after matching the full article number, voltage class, module section and connector arrangement.
Photograph every busbar, plug, gate lead, cooling connection and protective-earth point before removal.
After installation, inspect clearances and insulation, restore power in the Siemens sequence and test the affected drive function.
Features:
- Match exact A5E00825004 identity
- Confirm power-section and phase position
- Complete insulation and functional tests
The Siemens A5E00825004 requires documented replacement verification before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for A5E00825004
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens A5E00825004 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizeConfirm before dispatch
-
Shipping weight0.38 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about A5E00825004
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What equipment accepts the IGD1/R3 board with IGBT?
The IGD1/R3 board with IGBT is used in the documented SINAMICS power-block repair parts configuration for controls power semiconductor gates. -
How should the Power-block voltage class rating be confirmed for the IGD1/R3 board with IGBT?
For the IGD1/R3 board with IGBT, match Installed power-block class and IGBT-defined current rating to the installed equipment nameplate. -
What happens inside the power-block firing section for the IGD1/R3 board with IGBT?
The IGD1/R3 board with IGBT performs controls power semiconductor gates through the igd1/r3 gate-drive stage. -
Which marking separates the IGD1/R3 board with IGBT?
For the IGD1/R3 board with IGBT, record A5E00825004 IGD1/R3 together with the complete article and installed revision. -
Why must internal gate and feedback plugs be photographed for the IGD1/R3 board with IGBT?
On the IGD1/R3 board with IGBT, inspect internal gate and feedback plugs for keying, damage, contamination, routing and secure seating. -
What is verified on the isolated gate-control supply for the IGD1/R3 board with IGBT?
Before energizing the IGD1/R3 board with IGBT, measure isolated gate-control supply and confirm the documented polarity or phase condition. -
When is substitution of the IGD1/R3 board with IGBT unsafe?
A IGD1/R3 board with IGBT replacement must match its electrical class, section role, companion hardware and mechanical interface. -
Which result completes commissioning for the IGD1/R3 board with IGBT?
For the IGD1/R3 board with IGBT, verify igbt identity and gate polarity; then record diagnostics and the controlled functional-test result.
READY TO VERIFY YOUR PART?
Get a A5E00825004 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
