PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- A5E36717790
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
A5E36717790 IGD3 R2 driver board
Siemens A5E36717790 is a IGD3 R2 driver board in the Siemens SINAMICS. It is used to control the connected motor or drive function within the configured machine.
Its documented configuration includes component class of IGD3/R2 driver board, drive family of SINAMICS power blocks, primary function of Drives FS225R12KE3-S1 switches, and power architecture of IGD3/R2 gate-control architecture. During operation, the IGD3 R2 driver board processes the configured drive commands and regulates the connected motor or power section.
Its documented configuration includes component class of IGD3/R2 driver board, drive family of SINAMICS power blocks, primary function of Drives FS225R12KE3-S1 switches, and power architecture of IGD3/R2 gate-control architecture. During operation, the IGD3 R2 driver board processes the configured drive commands and regulates the connected motor or power section.
BEFORE YOU BUY
Confirm the complete IGD3 R2 driver board
ACTUAL APPLICATIONS
Where A5E36717790 Fits Across Major Industry Sectors
Uses span paper, mining and water, subject to verified compatibility, operating conditions and project requirements.
-
01 · PULP & PAPER
Paper Manufacturing, Tissue Production and Paper Converting
Paper production, finishing and converting for commercial paper products.Tissue and napkin manufacturing for everyday consumer paper products. -
02 · MINING & MINERALS
Mineral Resource Extraction and Industrial Raw Material Processing
Mineral resource extraction for industrial production and material supply.Mineral processing and preparation for downstream industrial manufacturing operations. -
03 · WATER & WASTEWATER
Drinking Water Supply and Municipal Wastewater Treatment
Drinking water treatment and supply for municipal utility services.Municipal wastewater treatment and sanitation for urban service areas.
Technical specifications for A5E36717790
-
Product ModelA5E36717790
-
Product ParametersIGD3 R2 driver board
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassIGD3/R2 driver board
-
Drive FamilySINAMICS power blocks
-
Primary FunctionDrives FS225R12KE3-S1 switches
-
Power ArchitectureIGD3/R2 gate-control architecture
-
Voltage Class1,200 V semiconductor class
-
Current Rating225 A module designation
-
Control Supply24 V DC auxiliary supply
-
Power SectionPower-block gate section
-
Mechanical DesignFS225R12KE3-S1 assembly
-
Electrical Interface±15 A peak gate interface
-
Cooling IntegrationPower-stack thermal path
-
Board DesignationA5E36717790 IGD3/R2
-
Service RoleIGBT driver replacement board
-
Product StatusLegacy Siemens repair part
-
Commissioning CheckCheck +15 V / −8 V gating
View all additional
Alternative Names
A5E36717790
SINAMICS power-block repair parts IGD3 R2 driver board
Siemens IGD3 R2 driver board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match A5E36717790 to the installed SINAMICS power-block repair parts
Siemens A5E36717790 is a IGD3 R2 driver board used in the SINAMICS power-block repair parts.
Confirm voltage class, current rating, section position, interfaces and cooling arrangement before integration.
Use qualified drive-service personnel and follow the applicable Siemens safety, discharge and commissioning procedure.
Features:
- Exact product identity: A5E36717790
- Product class: IGD3 R2 driver board
- Family: SINAMICS power-block repair parts
The Siemens A5E36717790 requires documented system integration before energising the drive.
REPLACEMENT CONTROL
Verify the complete A5E36717790 identity before exchange
Replace A5E36717790 only after matching the full article number, voltage class, module section and connector arrangement.
Photograph every busbar, plug, gate lead, cooling connection and protective-earth point before removal.
After installation, inspect clearances and insulation, restore power in the Siemens sequence and test the affected drive function.
Features:
- Match exact A5E36717790 identity
- Confirm power-section and phase position
- Complete insulation and functional tests
The Siemens A5E36717790 requires documented replacement verification before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for A5E36717790
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens A5E36717790 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size35.8 × 12.1 × 6.6 cm
-
Shipping weight0.82 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about A5E36717790
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which semiconductor marking is tied to A5E36717790?
The board is identified with the FS225R12KE3-S1 power-device assembly. -
What gate voltages are expected from the IGD3/R2 circuit?
The recorded gate-control levels are approximately +15 V for turn-on and −8 V for turn-off. -
Why is the ±15 A peak gate current relevant?
It describes the short-duration drive capability used to switch the connected high-power IGBT reliably. -
Can a 20 kHz capability be treated as the operating setting?
No. The actual switching frequency is defined by the complete converter configuration and application. -
What isolation level should be considered during diagnosis?
The gate-control assembly is associated with isolation of at least 2,500 V RMS; use the approved test method. -
How should the FS225 gate leads be reconnected?
Restore the photographed polarity and channel positions without twisting, stretching or interchanging the leads. -
What can destroy a replacement IGD3/R2 board immediately?
A shorted IGBT, defective gate resistor, poor insulation or incorrect auxiliary supply can cause repeat failure. -
Which start-up observation is most important after fitting it?
Watch gate-related diagnostics and current response during the first controlled energisation of the repaired phase.
READY TO VERIFY YOUR PART?
Get a A5E36717790 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
