PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- C98043-A7120-L1
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
C98043-A7120-L1 converter transient suppression board
Siemens C98043-A7120-L1 is a converter transient suppression board for the SINAMICS drive systems. It is used to provide the documented converter transient suppression board function. Confirm the complete article identity, electrical limits, interfaces, companion hardware and controlled commissioning procedure before ordering.
BEFORE YOU BUY
Confirm the complete converter transient suppression board
ACTUAL APPLICATIONS
Application context for C98043-A7120-L1
Manufacturer documentation places the Converter Transient Suppression Board in practical drive applications. The three cases below describe different operating tasks in which C98043-A7120-L1 performs its documented product-family role with the configured companion equipment.
-
01 · AUTOMOTIVE
Balance body transfer with Converter Transient
As part of the skid conveyors and lift stations, C98043-A7120-L1 serves its documented function as a Converter Transient Suppression Board. During model change, the system uses this function to coordinate motion requests and station interlocks, helping it keep the assembly takt moving. -
02 · PLASTICS & PACKAGING
Govern palletizing with Converter Transient process control
For the coordinated operation of the case conveyors and robot cells, C98043-A7120-L1 provides its specified system function as a Converter Transient Suppression Board. During product-gap recovery, the system uses this function to restore coordinated flow after a controlled stop, helping it return the line to stable throughput. -
03 · WATER & WASTEWATER
Govern aeration-blower output with Converter Transient
For the coordinated operation of the blower motors, air headers and oxygen-control loops, C98043-A7120-L1 provides its specified system function as a Converter Transient Suppression Board. During oxygen-setpoint change, the system uses this function to coordinate blower speed with the required air delivery, helping it match aeration energy to treatment demand.
Technical specifications for C98043-A7120-L1
-
Product ModelC98043-A7120-L1
-
Product Parametersconverter transient suppression board
-
In stock1 unit
-
ManufacturerSiemens
-
Assembly TypeTSE module
-
Companion Order No.6RY1803-0FA00
-
Product FamilySINAMICS DCM / SIMOREG
-
Control Supply24 V DC
-
Operating Temperature0 °C to +55 °C
-
Storage Temperature-25 °C to +70 °C
-
Relative Humidity≤95%, non-condensing
-
InstallationControl cabinet
-
Lifecycle ClassSiemens spare part
-
Export ControlAL:N / ECCN:N
-
Quantity Unit1 piece
View all additional
Alternative Names
C98043 A7120 L1
SINAMICS drive systems converter transient suppression board
Siemens converter transient suppression board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match C98043-A7120-L1 to the installed SINAMICS drive systems
Siemens C98043-A7120-L1 is a converter transient suppression board used in the SINAMICS drive systems. Apply C98043-A7120-L1 only in the documented SINAMICS drive systems equipment position. Match the article marking, power class, controlled section and approved system drawings before any installation work begins.
Photograph connector keying, cable labels, shields, protective earth and adjacent assemblies for C98043-A7120-L1. Preserve the documented routing and mechanical position while exchanging the installed component. Confirm installed equipment voltage class, model-specific channel current, the exact mechanical position and the approved system configuration before connection.
After fitting C98043-A7120-L1, restore the controlled settings, review diagnostics and test the connected motor, converter or interface at a safe operating point. Keep the measured results in the maintenance record. Use qualified personnel, keep the applicable manufacturer instructions at the work location and retain the measured results with the equipment service record.
Features:
- Exact identity: C98043-A7120-L1
- Product class: converter transient suppression board
- Family: SINAMICS drive systems
The Siemens C98043-A7120-L1 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete C98043-A7120-L1 identity before exchange
Replace C98043-A7120-L1 only after matching the full article identity, converter transient suppression board, installed sinamics drive systems service section and documented system role. A similar family name or physical outline does not establish interchangeability.
Before removal, photograph the product label, mounting position, c98043-a7120-l1 keyed connector set, cable routing, shields, earth connections and adjacent assemblies. Preserve the approved configuration or parameter backup for recovery.
After installation, restore all controlled settings and complete validate c98043-a7120-l1 diagnostics and function. Review status indications and diagnostics, test the affected function at a safe operating point, and record the final maintenance acceptance evidence.
Features:
- Exact identity: C98043-A7120-L1
- Connection: C98043-A7120-L1 keyed connector set
- Test: Validate C98043-A7120-L1 diagnostics and function
The Siemens C98043-A7120-L1 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for C98043-A7120-L1
- Installation checks matched to SINAMICS drive systems
- Exact Siemens identity required before service
Documentation for Siemens C98043-A7120-L1 must match the installed equipment and complete product identity; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size26 × 23 × 3.5 cm
-
Shipping weight0.38 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about C98043-A7120-L1
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How should receiving inspection be performed for C98043-A7120-L1?
Inspect the C98043-A7120-L1 label, housing, terminals, connectors, mounting points and packaging for damage before disturbing the installed unit. -
What functional test is appropriate before returning C98043-A7120-L1 to service?
Complete Validate C98043-A7120-L1 diagnostics and function at a controlled operating point and record measured values plus final maintenance approval. -
What evidence should remain in the maintenance file for C98043-A7120-L1?
For C98043-A7120-L1, keep incoming inspection, original wiring evidence, configuration backup, diagnostic results, functional test and service approval. -
Which adjacent assemblies must be checked before installing C98043-A7120-L1?
For C98043-A7120-L1, check the documented section, 6RY1803-0FA00 companion service module, cables, cooling provisions and neighboring boards for matching revisions and physical clearance. -
How can maintenance confirm the correct equipment position for C98043-A7120-L1?
Use the cabinet drawing, original slot record, cable labels and C98043-A7120-L1 keyed connector set; photograph the arrangement before removal. -
Which configuration records should be saved before removing C98043-A7120-L1?
Archive the parameter set, drive project, diagnostics, terminal schedule and original connection photographs applicable to C98043-A7120-L1. -
When is a visually similar Siemens part unsuitable for replacing C98043-A7120-L1?
For C98043-A7120-L1, it is unsuitable whenever the complete code, revision, power class, interface, system role or approved companion hardware differs. -
How should isolation be confirmed before work on C98043-A7120-L1?
For C98043-A7120-L1, follow the site lockout procedure, prove absence of voltage and allow the documented DC-link discharge time before touching the assembly.
READY TO VERIFY YOUR PART?
Get a C98043-A7120-L1 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
