PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- ET 200MP
- 6ES7155-5AA01-0AB0
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Standard PROFINET station access with defined expansion limits
The Siemens 6ES7155-5AA01-0AB0 is an IM 155-5 PN Standard interface for ET 200MP. Its integrated two-port Ethernet switch links the distributed station to PROFINET IO, with module expansion depending on the documented system power-supply arrangement.
The interface supports shared device, MRP and isochronous operation, but the cited datasheet explicitly excludes S2, R1 and MRPD. These distinctions separate its Standard feature set from High Feature variants and are important when retaining an existing controller and network configuration.
The interface supports shared device, MRP and isochronous operation, but the cited datasheet explicitly excludes S2, R1 and MRPD. These distinctions separate its Standard feature set from High Feature variants and are important when retaining an existing controller and network configuration.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Industrial Production and Service Sectors
These industry examples describe Siemens' broader market coverage, not verified installations of this exact product. Product suitability depends on the documented configuration and engineering requirements.
-
01 · WATER & WASTEWATER
Drinking Water and Wastewater Services
Drinking water production for public and community supply services.Wastewater treatment serving households, communities and industrial water users. -
02 · PLASTICS PROCESSING
Extruded and Thermoformed Plastics
Plastic extrusion for material production within the plastics industry.Thermoforming as a manufacturing route for shaped plastic products. -
03 · PACKAGING
Food and Beverage Packaging
Food product packaging across the commercial food manufacturing sector.Beverage packaging for finished products in the drinks industry.
Technical specifications for 6ES7155-5AA01-0AB0
-
Product Model6ES7155-5AA01-0AB0
-
Spare Model6ES7 155-5AA01-0AB0
-
Product ParametersET 200MP Standard Interface
-
ManufacturerSiemens
-
Interface designationIM 155-5 PN ST
-
Supply range24 V DC nominal; 20.4-28.8 V DC permissible
-
Voltage-failure buffering10 ms
-
Maximum current consumption1.2 A
-
Backplane infeed power14 W
-
Typical power loss4.5 W
-
I/O module allowance12 without additional PS; 30 with additional PS
-
Power segmentsMaximum 3
-
Per-module address allowance256 bytes per input/output direction
-
Per-station address allowance512 bytes per input/output direction
-
Network ports2 RJ45 ports, integrated switch, 100 Mbit/s full duplex
-
Shared-device controllersMaximum 2
-
Media redundancyMRP supported; MRPD not supported
-
System redundancyS2 and R1 not supported
-
Isochronous clock250 microseconds minimum; 4 ms maximum cycle
View all additional
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
ET 200MP STANDARD INTERFACE
Keep Standard-interface limits visible in the station design
Use this IM 155-5 PN Standard interface where the required controller arrangement fits its documented capabilities. It supports PROFINET IO through two RJ45 ports and an integrated switch. The shared-device limit is two controllers, so a design copied from a four-controller High Feature station requires an explicit compatibility review.
The station has separate limits for I/O-module quantity, address space and backplane power. Up to thirty I/O modules require the additional system-power arrangement described by Siemens; a count of thirty does not establish that arbitrary modules fit the power budget. The per-station input/output address limit is also independent of the module-count allowance.
Configure the device using a supported engineering version or documented GSDML route, then review the timing requirements. IRT and application-synchronized isochronous operation are listed, whereas S2, R1 and MRPD are not. Network media redundancy through MRP should therefore not be confused with a redundant-controller system configuration.
Features:
- Two-controller shared-device limit
- Separate module, address and power budgets
- MRP distinct from system redundancy
The Siemens 6ES7155-5AA01-0AB0 requires the documented hardware configuration, installation conditions and interface arrangement to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Match the installed Standard order number before comparing another ET 200MP interface. The difference between Standard and High Feature is functional, not merely a marketing label. For this order code the documented shared-device capacity and redundancy exclusions determine whether the existing network arrangement can be retained unchanged.
Preserve the project module sequence and address allocation, and check the configured system power supplies before fitting the spare. The cited edition describes three permitted power segments and a thirty-module ceiling with additional power. Confirm the assembled station rather than treating the interface's maximum count as a complete configuration approval.
Review the engineering version, GSDML definition and actual firmware against the station records. Reference firmware V4.1.0 and hardware status FS01 in the 2019 datasheet do not identify a supplied unit. The operating orientation also matters because the documented vertical temperature limit is lower than the horizontal limit.
Features:
- Standard feature-set comparison
- Power-segment and address preservation
- Engineering and orientation checks
The Siemens 6ES7155-5AA01-0AB0 requires replacement verification based on its complete order number, installed hardware, signal configuration and project documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software, certificates, and other items are not included with this equipment unless listed in the stock item description.Features:
- Exact-model manufacturer data and relevant original manual pages
- Original terminal diagrams, configuration details and manufacturer safety context
- Accessories and supplied documentation follow the written quotation
Documentation for the Siemens 6ES7155-5AA01-0AB0 includes an independent technical summary and selected original manufacturer pages; check the applicable document edition against the delivered product and approved installation documentation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizeConfirm final packed dimensions
-
Shipping weightConfirm final packed weight
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8517623790
-
OriginConfirm supplied-unit origin
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7155-5AA01-0AB0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What distinguishes this Standard interface from High Feature versions?
This datasheet allows two shared-device controllers and excludes S2, R1 and MRPD. Compare those exact capabilities rather than assuming every IM 155-5 PN has the same feature set. -
Which engineering version is documented?
The cited edition lists TIA Portal V14 with HSP 0223 or integration from V15. It also specifies the relevant GSDML route for STEP 7. Check the actual engineering installation against that documentation. -
Is an additional system power supply always required?
The ordering description states twelve I/O modules without an additional PS and thirty with additional PS. The installed modules' demand must still fit the configured power arrangement. -
Does the interface provide redundant PROFINET S2 operation?
No. The exact-model datasheet explicitly marks PROFINET system redundancy S2 and redundant configuration R1 as unsupported. -
How does mounting orientation affect temperature limits?
The cited datasheet specifies 0-60 degrees Celsius for horizontal installation and 0-40 degrees Celsius for vertical installation. These are operating conditions, not shipping-temperature limits. -
What diagnostic indicators are available?
The datasheet lists RUN, ERROR and MAINT LEDs plus two LINK TX/RX indications. These distinguish module status and network-link information.
READY TO VERIFY YOUR PART?
Get a 6ES7155-5AA01-0AB0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
6ES7155-5AA01-0AB0ET 200MP Standard InterfaceManufacturer: SiemensView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
