PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- ET 200S
- 6ES7131-4BB00-0AB0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES7131-4BB00-0AB0 high-feature digital input module
Siemens 6ES7131-4BB00-0AB0 is a high-feature digital input module for the ET 200S product family. It provides 2 for distributed automation, machine control, and industrial communication tasks.
The assembly uses the documented connection, channel, and diagnostic arrangement for this exact order code. Match the complete suffix, terminal method, electrical ratings, and installed system revision before replacement or commissioning.
The assembly uses the documented connection, channel, and diagnostic arrangement for this exact order code. Match the complete suffix, terminal method, electrical ratings, and installed system revision before replacement or commissioning.
BEFORE YOU BUY
Confirm the complete high-feature digital input module
ACTUAL APPLICATIONS
Application context for 6ES7131-4BB00-0AB0
6ES7131-4BB00-0AB0 supports documented ET 200S functions in distributed automation, machine control and process-industry systems where the exact order code must match.
-
01 · AUTOMOTIVE MANUFACTURING
Automotive Production and Assembly
Body production linesPowertrain assembly cells -
02 · WATER AND WASTEWATER
Water Treatment and Distribution
Pumping station automationTreatment process monitoring -
03 · FOOD AND PACKAGING
Food Processing and Packaging
Packaging machine controlConveyor handling systems
Technical specifications for 6ES7131-4BB00-0AB0
-
Product Model6ES7131-4BB00-0AB0
-
Product ParametersHigh-feature digital input module
-
In stock5 units
-
ManufacturerSiemens
-
Digital inputs2
-
Rated input voltage24 V DC
-
Backplane current10 mA max.
-
Power loss0.4 W
-
Signal 0 range-30 to +5 V
-
Signal 1 range+11 to +30 V
-
Input delay0.1 / 0.5 / 3 / 15 ms
-
Input current at signal 18 mA typ.
-
Two-wire sensor supportYes
-
Shielded cable length1,000 m max.
-
Unshielded cable length600 m max.
-
DiagnosticsEncoder short-circuit and SF LED
-
Isolation test500 V DC
View all additional
Alternative Names
6ES7131 4BB00 0AB0
ET 200S high-feature digital input module
6ES7131-4BB00-0AB0 industrial spare
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6ES7131-4BB00-0AB0 high-feature digital input module
6ES7131-4BB00-0AB0 is the documented high-feature digital input module for the ET 200S family. Its integration basis includes digital inputs: 2, rated input voltage: 24 v dc, and backplane current: 10 ma max., so the connected circuit or network must be engineered to those exact limits.
The installed arrangement must also match power loss: 0.4 w, signal 0 range: -30 to +5 v, and signal 1 range: +11 to +30 v. Verify the mating terminal, conductor method, power group, and controller configuration before energizing the product, especially where a neighboring order code uses a different connection or channel arrangement.
During commissioning, apply the documented supply and interface conditions, test each affected channel or communication path separately, and compare field behavior with controller diagnostics. Record the final wiring, addressing, status indications, and measured results so the 6ES7131-4BB00-0AB0 configuration can be reproduced during future maintenance.
Features:
- Acquires discrete field states on the available input channels
- Converts field voltage states into controller input data
- Displays channel states through the integrated status indicators
The 6ES7131-4BB00-0AB0 high-feature digital input module requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 6ES7131-4BB00-0AB0 high-feature digital input module
Use the complete 6ES7131-4BB00-0AB0 order code when replacing this high-feature digital input module; a similar housing or family number does not confirm interchangeability. Compare digital inputs: 2, rated input voltage: 24 v dc, and backplane current: 10 ma max. with the removed product and the current engineering record.
Before removal, document terminal numbers, cable routing, switch positions, mounting orientation, and adjacent module order. The replacement must also satisfy power loss: 0.4 w, signal 0 range: -30 to +5 v, and signal 1 range: +11 to +30 v, because these details determine whether the installed electrical and mechanical arrangement can be reproduced.
After fitting the verified 6ES7131-4BB00-0AB0, restore the controlled configuration and repeat the applicable continuity, signal, load, or network tests. Confirm normal status indication and controller diagnostics under the documented operating conditions, then retain the nameplate photographs, configuration record, and acceptance results with the asset history.
Features:
- Filters short input transitions before updating process data
- Supplies the documented interface for two-wire field sensors
- Separates field potential from the station backplane electronics
The 6ES7131-4BB00-0AB0 high-feature digital input module requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Detects supported channel or sensor-circuit faults
- Transfers diagnostic status to the connected controller
- Preserves channel mapping during module replacement
Documentation for the 6ES7131-4BB00-0AB0 high-feature digital input module must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size1.50 × 8.10 × 5.20 cm
-
Shipping weight0.04 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538901100
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7131-4BB00-0AB0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which rating controls the two-channel HF input?
Use the documented Digital inputs 2, Rated input voltage 24 V DC, and circuit limits for this exact two-channel HF input. -
What must be matched before wiring the two-channel HF input?
Match its complete order code, Digital inputs 2, terminal method, and installed equipment interface. -
How should the two-channel HF input be commissioned?
Test the two-channel HF input one circuit or channel group at a time and record the observed status. -
Which compatibility check protects the two-channel HF input replacement?
Confirm the stated Rated input voltage 24 V DC, compatible system, terminal base, and engineering configuration. -
What should be photographed around the two-channel HF input?
Capture labels, wiring positions, switches, adjacent hardware, and mounting orientation before removal. -
Which test record belongs with the two-channel HF input?
Archive the continuity or signal test, configuration result, visible condition, and final acceptance status. -
What should an MRO buyer request for the two-channel HF input?
Request the exact two-channel HF input order code, required condition, quantity, destination, and inspection documents. -
How should a distributor inspect the two-channel HF input?
Compare the label, construction, connections, and documented Digital inputs 2 before releasing the shipment.
READY TO VERIFY YOUR PART?
Get a 6ES7131-4BB00-0AB0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
