PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- ET 200S
- 6ES7151-1AB02-0AB0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES7151-1AB02-0AB0 Optical PROFIBUS Interface Module
Siemens 6ES7151-1AB02-0AB0 is a optical profibus interface module in the SIMATIC ET 200S IM151-1 FO range. It is intended for compatible industrial automation projects requiring the documented distributed ET 200S station communication.
The IM151-1 FO connects a configured ET 200S station through an integrated optical PROFIBUS interface. It supports up to 63 associated modules and 128 bytes each of input and output addressing. Station power loading, module selection and fibre connections must match the accepted PROFIBUS configuration.
The IM151-1 FO connects a configured ET 200S station through an integrated optical PROFIBUS interface. It supports up to 63 associated modules and 128 bytes each of input and output addressing. Station power loading, module selection and fibre connections must match the accepted PROFIBUS configuration.
BEFORE YOU BUY
Confirm the complete optical profibus interface module
ACTUAL APPLICATIONS
Application context for 6ES7151-1AB02-0AB0
6ES7151-1AB02-0AB0 is a optical profibus interface module for SIMATIC ET 200S IM151-1 FO. Its industrial use includes food and beverage, industrial manufacturing, water and wastewater. Selection depends on the connected equipment and documented configuration.
-
01 · FOOD & BEVERAGE
Food Processing and Beverage Production
Beverage Processing and ProductionFood Manufacturing Process Control -
02 · INDUSTRIAL MANUFACTURING
Industrial Assembly and Component Production
Manufacturing Production Process ControlIndustrial Materials Processing Production -
03 · WATER & WASTEWATER
Water Supply and Municipal Wastewater Treatment
Municipal Water Supply ControlIndustrial Wastewater Treatment Processes
Technical specifications for 6ES7151-1AB02-0AB0
-
Product Model6ES7151-1AB02-0AB0
-
Product ParametersOptical PROFIBUS Interface Module
-
In stock4 units
-
ManufacturerSiemens
-
Maximum module allocation63 power, electronic or motor-starter modules
-
PROFIBUS transmission rate12 Mbit/s maximum
-
Input address area128 byte
-
Output address area128 byte
-
Maximum supply current200 mA
-
Backplane output current700 mA at 5 V DC
-
Mains buffering20 ms
-
Typical power loss3.3 W
-
Fibre interface4 simplex sockets
-
SYNC and FREEZESupported
-
Direct slave exchangeSupported
-
Isochronous operationNot supported
-
Permitted circuit potential difference500 V DC
-
Isolation test57 V DC / 60 V AC
-
Vendor identifier806Bh
View all additional
Alternative Names
6ES7151-1AB02-0AB0
SIMATIC ET 200S IM151-1 FO Optical PROFIBUS Interface Module
SIMATIC ET 200S IM151-1 FO 63 power, electronic or motor-starter modules Optical PROFIBUS Interface Module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6ES7151-1AB02-0AB0 optical profibus interface module
Integrate 6ES7151-1AB02-0AB0 only in the documented SIMATIC ET 200S IM151-1 FO configuration. Match the installed interfaces and the engineered application before selecting this optical profibus interface module.
The IM151-1 FO connects a configured ET 200S station through an integrated optical PROFIBUS interface. It supports up to 63 associated modules and 128 bytes each of input and output addressing. Station power loading, module selection and fibre connections must match the accepted PROFIBUS configuration.
Use the applicable controlled instructions for SIMATIC ET 200S IM151-1 FO. Validate the assigned signals, communication or output behaviour and retain the accepted configuration for 6ES7151-1AB02-0AB0.
Features:
- Maximum module allocation: 63 power, electronic or motor-starter modules
- PROFIBUS transmission rate: 12 Mbit/s maximum
- Input address area: 128 byte
The 6ES7151-1AB02-0AB0 optical profibus interface module requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 6ES7151-1AB02-0AB0 optical profibus interface module
Confirm the complete 6ES7151-1AB02-0AB0 identity and installed SIMATIC ET 200S IM151-1 FO execution before replacement. Compare the connector arrangement and the technical values required by the existing project.
Record the optical profibus interface module connections, project settings and associated accessories. Preserve the accepted configuration and isolate the affected circuits before exchange.
After fitting 6ES7151-1AB02-0AB0, restore the verified configuration and test every affected function. Retain the identification, diagnostic results and final acceptance record for the SIMATIC ET 200S IM151-1 FO equipment.
Features:
- Maximum module allocation: 63 power, electronic or motor-starter modules
- PROFIBUS transmission rate: 12 Mbit/s maximum
- Input address area: 128 byte
The 6ES7151-1AB02-0AB0 optical profibus interface module requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 6ES7151-1AB02-0AB0 optical profibus interface module must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size4.5 × 11.95 × 7.5cm
-
Shipping weight0.15kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7151-1AB02-0AB0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How many ET 200S modules can IM151-1 FO accommodate?
For 6ES7151-1AB02-0AB0, the documented maximum module allocation is 63 power, electronic or motor-starter modules. -
What is the optical IM151 PROFIBUS rate limit?
For 6ES7151-1AB02-0AB0, the documented profibus transmission rate is 12 Mbit/s maximum. -
How large is the IM151-1 FO input address area?
For 6ES7151-1AB02-0AB0, the documented input address area is 128 byte. -
How large is the optical interface output address area?
For 6ES7151-1AB02-0AB0, the documented output address area is 128 byte. -
What current must its station supply support?
For 6ES7151-1AB02-0AB0, the documented maximum supply current is 200 mA. -
What current can IM151-1 FO provide to the backplane?
For 6ES7151-1AB02-0AB0, the documented backplane output current is 700 mA at 5 V DC. -
What identification supports ordering the SIMATIC ET 200S IM151-1 FO spare?
Specify 6ES7151-1AB02-0AB0, quantity and the installed SIMATIC ET 200S IM151-1 FO arrangement. Include label and connector photographs, and identify any required accessories separately. -
Which incoming checks apply to the optical profibus interface module?
Compare the 6ES7151-1AB02-0AB0 label, connector condition and supplied accessories with the quotation. Verify the accepted SIMATIC ET 200S IM151-1 FO configuration before replacing the installed item.
READY TO VERIFY YOUR PART?
Get a 6ES7151-1AB02-0AB0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
