PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- ET 200SP
- 6ES7510-1DJ01-0AB0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Distributed control with integrated PROFINET communication
Siemens 6ES7510-1DJ01-0AB0 is the SIMATIC ET 200SP CPU 1510SP-1 PN, combining local program execution with PROFINET communication. It provides 100 KB of program work memory and 750 KB of data work memory for configured machine control and distributed automation tasks.
The controller supports operation as an IO controller, intelligent device or standalone CPU. A SIMATIC Memory Card is required, and the first two network ports require a suitable BusAdapter. Check the installed firmware, engineering software, I/O configuration and power budget when selecting this spare-part controller.
The controller supports operation as an IO controller, intelligent device or standalone CPU. A SIMATIC Memory Card is required, and the first two network ports require a suitable BusAdapter. Check the installed firmware, engineering software, I/O configuration and power budget when selecting this spare-part controller.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Distributed control roles in machine automation
The following arrangements are documented operating modes of this CPU. They describe how an engineered ET 200SP station can be used, without attributing the exact order code to an unverified customer installation.
-
01 · LOCAL MACHINE CONTROL
Standalone control of a compact machine station
An ET 200SP station can use this CPU to execute the machine program and process connected local I/O without a higher-level controller. The engineer sizes program memory, connected modules and backplane power for the station rather than treating the CPU as a passive interface module. -
02 · DISTRIBUTED PREPROCESSING
Local process control below a supervisory PLC
Configured as an I-device, the CPU exchanges selected data with a higher-level PROFINET IO controller while processing the local sub-process. This arrangement keeps signal and encoder wiring close to the station and sends the required process data over the network. -
03 · NETWORKED I/O CONTROL
Coordinating remote PROFINET equipment
Configured as an IO controller, the CPU exchanges cyclic process data with distributed PROFINET devices. The project must define network topology, update times and device limits; IRT use also requires a compatible, correctly engineered network and participating devices.
Technical specifications for 6ES7510-1DJ01-0AB0
-
Product Model6ES7510-1DJ01-0AB0
-
Product ParametersCompact PROFINET CPU Controller
-
In stock9 units
-
ManufacturerSiemens
-
Program work memory100 KB
-
Data work memory750 KB
-
Nominal supply voltage24 V DC; permitted 19.2-28.8 V
-
Bit operation time72 ns typical
-
PROFINET port arrangement3 ports: 1 integrated RJ45 and 2 via a required BusAdapter
-
Controller operating rolesPROFINET IO controller, I-device or standalone CPU
-
PROFINET device capacityUp to 64 IO devices, including up to 64 IRT devices
-
Central I/O expansionUp to 64 ET 200SP modules and 16 ET 200AL modules; configuration limits apply
-
Load-memory mediumSIMATIC Memory Card required; supported capacity up to 32 GB
-
Typical power loss5.6 W
-
Available backplane power8.75 W maximum
-
Horizontal operating temperature-25 to +60 C; condensation not permitted
-
Programming languagesLAD, FBD, STL, SCL and GRAPH
-
Closed-loop control functionsPID_Compact, PID_3Step and PID_Temp instruction support
View all additional
Alternative Names
6ES75101DJ010AB0
CPU 1510SP-1 PN
ET 200SP compact controller
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SIMATIC ET 200SP / PROFINET CONTROL
Engineer the CPU, load memory and distributed station together
Select the CPU operating role before engineering the network: IO controller, I-device and standalone operation have different responsibilities. The application program executes in the CPU, while configured local and distributed devices supply the required process signals.
Plan the SIMATIC Memory Card and the BusAdapter as required parts of the arrangement. One network port is integral to the CPU and two use the adapter; optional PROFIBUS operation requires the documented CM DP rather than the PROFINET connector.
Compare the project with the installed firmware, engineering version and module arrangement. Maximum module and device counts do not remove the need to verify the backplane power budget, address space and required communication performance.
Features:
- Exact article: 6ES7510-1DJ01-0AB0
- Select the BusAdapter for network ports 1 and 2
- Verify local I/O configuration and backplane power budget
The Siemens 6ES7510-1DJ01-0AB0 CPU 1510SP-1 PN controller requires CPU firmware, load memory, BusAdapter, I/O configuration and power budget to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Check the full 6ES7510-1DJ01-0AB0 order code against the installed CPU and archived engineering project. Preserve the memory-card contents, network identity, adapter selection and validated application configuration before changing hardware.
Siemens lists 6ES7510-1DK03-0AB0 as the successor in the official catalog. This is a catalog replacement relationship, not a guarantee that engineering software, firmware or project changes are unnecessary in every installation.
Commission a replacement under controlled machine conditions. Restore the correct project, verify network and I/O diagnostics, and test the required process response before releasing the equipment for normal operation.
Features:
- Match the complete 6ES7510-1DJ01-0AB0 article
- Match the complete CPU article number and installed firmware
- Check SIMATIC Memory Card and engineering compatibility
The Siemens 6ES7510-1DJ01-0AB0 CPU 1510SP-1 PN controller requires replacement verification against CPU firmware, load memory, BusAdapter, I/O configuration and power budget before commissioning.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Amikon reference PDFs are prepared from Siemens documentation; the manual package retains the selected original Siemens pages. Accessories, manuals, cables, calibration data, software, certificates, and other items are not included with this equipment unless listed in the stock item description.
Features:
- Three model-specific PDF previews are available
- Engineering software, licenses and project backups remain the customer's responsibility
- Accessories are supplied only when listed in the quotation
Documentation for the Siemens 6ES7510-1DJ01-0AB0 CPU 1510SP-1 PN controller must match the installed article and applicable version; check document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size13.10 x 13.50 x 8.80 cm (Siemens packaging)
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371091; verify locally
-
OriginGermany; confirm label
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7510-1DJ01-0AB0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Can the CPU run without a SIMATIC Memory Card?
No. Siemens specifies a SIMATIC Memory Card for load memory. Select a supported card with sufficient capacity for the project and required stored data; the card is separate from the CPU work memory. -
Why is only one of the three PROFINET ports immediately accessible?
One RJ45 port is integrated in the CPU. Ports 1 and 2 are provided through a suitable BusAdapter, which Siemens identifies as required and separate from the delivered CPU. Choose the documented adapter for the intended cabling. -
Does the CPU require a higher-level controller?
Not necessarily. It can operate as a standalone CPU, a PROFINET IO controller or an I-device. The appropriate role depends on the machine program and network architecture configured in the engineering project. -
Can this CPU connect directly to a PROFIBUS DP segment?
PROFIBUS operation requires the optional CM DP communication module. The CPU's integrated network interface is PROFINET; adding a PROFIBUS cable alone does not create a DP master interface. -
How many remote PROFINET devices can it control?
The manual specifies up to 64 IO devices, with up to 64 using IRT. Check the complete configuration, data exchange and timing limits before assuming that a maximum-count network will satisfy the application. -
Can the same temperature limit be used for vertical mounting?
No. The documented maximum ambient temperature is 60 C for horizontal mounting and 50 C for vertical mounting, with a -25 C lower limit and no condensation. Use the correct mounting-specific conditions. -
Is the Siemens successor a configuration-free replacement?
Siemens lists 6ES7510-1DK03-0AB0 as the successor, but that listing alone does not prove a configuration-free exchange. Verify the engineering version, firmware, network arrangement and program requirements before migrating the installed CPU. -
What should be checked at the X80 supply connector?
The supply connection uses 1L+ and 1M, with 2L+ and 2M for loop-through. Corresponding terminals are internally bridged, and Siemens limits loop-through current to 10 A. Maintain the specified DC supply range and protective measures.
READY TO VERIFY YOUR PART?
Get a 6ES7510-1DJ01-0AB0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
