PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- S7-200
- 6ES7214-2BD23-0XB0
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
CPU 224XP combining relay control with integrated analog signals
The Siemens 6ES7214-2BD23-0XB0 is an S7-200 CPU 224XP with AC supply, fourteen digital inputs and ten relay outputs. Two analog inputs, one analog output and two RS485 ports distinguish its integrated hardware from the smaller CPU 224.
Its analog channels support bipolar voltage measurement and a selectable voltage or current output. Program capacity changes with run-mode editing, while expansion remains subject to the controller's power budget. Relay switching and analog performance must be checked separately against the application's signal and timing requirements.
Its analog channels support bipolar voltage measurement and a selectable voltage or current output. Program capacity changes with run-mode editing, while expansion remains subject to the controller's power budget. Relay switching and analog performance must be checked separately against the application's signal and timing requirements.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Industrial Production and Service Sectors
These industry examples describe Siemens' broader market coverage, not verified installations of this exact product. Product suitability depends on the documented configuration and engineering requirements.
-
01 · PACKAGING
Pharmaceutical and Non-food Packaging
Pharmaceutical product packaging within the medicines and healthcare sector.Non-food product packaging across consumer goods and industrial markets. -
02 · PLASTICS PROCESSING
Molded Plastic Products
Injection molding for plastic product manufacturing across industrial markets.Blow molding within the wider plastic product manufacturing industry. -
03 · FOOD & BEVERAGE
Bakery, Confectionery and Sugar Manufacturing
Bakery and confectionery manufacturing across diverse consumer food categories.Sugar manufacturing and processing within the commercial food industry.
Technical specifications for 6ES7214-2BD23-0XB0
-
Product Model6ES7214-2BD23-0XB0
-
Spare ModelCPU 224XP
-
Product ParametersCPU 224XP AC/DC/relay
-
ManufacturerSiemens
-
ControllerS7-200 CPU 224XP AC/DC/relay
-
Supply voltage120-240 V AC nominal; 85-264 V AC permissible
-
Digital inputs14 inputs, 24 V DC
-
Digital outputs10 relay outputs; 2 A maximum per point
-
Analog inputs2 single-ended inputs, +/-10 V
-
Analog input resolution11 bits plus 1 sign bit
-
Analog input conversion time125 ms
-
Analog output1 channel; 0-10 V or 0-20 mA
-
Analog output resolution12 bits
-
Program memory12288 bytes with run-mode edit; 16384 bytes without
-
User data memory10240 bytes
-
Communication2 RS485 ports; PPI/MPI slave/Freeport
-
Expansion capacity7 modules, subject to power budget
-
Power dissipation11 W
-
Bare dimensions140 x 80 x 62 mm (W x H x D)
View all additional
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
S7-200 XP CONTROL
CPU 224XP combining relay control with integrated analog signals
The CPU 224XP combines discrete control and a small analog interface without making their electrical requirements identical. Its analog inputs are single-ended bipolar voltage channels, while the analog output can provide voltage or current. These channels are not isolated, so their reference wiring and permitted loads require explicit review.
Two RS485 ports provide more serial connection flexibility than the single-port CPU 224. Preserve each port's configured service and communication rate when defining the project. The ten relay outputs remain mechanical switching devices; the pulse-generation capability of transistor-output CPU variants cannot be assumed for this AC/DC/relay order number.
Choose expansion modules against both the seven-module count and the available supply budgets. The CPU also has separate program and data capacities, with program size changing when run-mode editing is enabled. Checking only the number of digital points would miss these memory, analog and communication constraints in an existing station.
Features:
- Integrated non-isolated analog I/O
- Two independent RS485 ports
- Relay duty and scaling checks
The Siemens 6ES7214-2BD23-0XB0 requires the documented hardware configuration, installation conditions and interface arrangement to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Confirm the XP designation and the complete 2BD23-XB0 ordering number before selecting a spare. A standard CPU 224 lacks this unit's integrated analog channels and second serial port. Record both port settings, analog wiring and terminal-group assignments alongside the program backup to preserve the complete application interface.
Compare the configured analog scaling with the original channel ranges. The inputs measure plus or minus ten volts; the output supports zero to ten volts or zero to twenty milliamps with different load limits. Check how the installation uses the output terminals rather than assuming that both output forms operate as independent channels.
Review relay duty and field-power protection before returning the station to service. The manufacturer warns about unintended short output pulses when contacts switch output power and describes suppression for inductive loads. Retain the documented isolation, grounding and independent safeguards while checking startup values and the restored program's intended output sequence.
Features:
- XP analog and dual-port identity
- Bipolar scaling and output load checked
- Relay startup behavior verified
The Siemens 6ES7214-2BD23-0XB0 requires replacement verification based on its complete order number, installed hardware, signal configuration and project documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software, certificates, and other items are not included with this equipment unless listed in the stock item description.
Features:
- Exact-model manufacturer data and relevant original manual pages
- Original terminal diagrams, configuration details and manufacturer safety context
- Accessories and supplied documentation follow the written quotation
Documentation for the Siemens 6ES7214-2BD23-0XB0 includes an independent technical summary and selected original manufacturer pages; check the applicable document edition against the delivered product and approved installation documentation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizeConfirm final packed dimensions
-
Shipping weightConfirm final packed weight
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537101190
-
OriginConfirm supplied-unit origin
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7214-2BD23-0XB0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How does this XP differ from a CPU 224?
This exact CPU 224XP has two analog inputs, one analog output and two RS485 ports, in addition to fourteen digital inputs and ten relay outputs. -
Are the analog channels isolated?
No. The manufacturer lists no isolation for the integrated analog inputs and output. Follow the original reference wiring and allowable signal conditions. -
What analog input range is available?
The two single-ended inputs use a plus or minus ten-volt range, with eleven bits plus a sign bit and a 125 ms conversion time. -
Can the analog output drive any load?
No. The manual specifies at least 5000 ohms for voltage output and at most 500 ohms for current output. -
Does the relay version provide high-speed pulse outputs?
No. Pulse-output ratings in the CPU comparison apply to DC output versions. Relay switching has a maximum 1 Hz frequency. -
How does editing mode affect program size?
CPU 224XP supports 12288 bytes with run-mode editing or 16384 bytes without it; user data memory is 10240 bytes.
READY TO VERIFY YOUR PART?
Get a 6ES7214-2BD23-0XB0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
6ES7214-2BD23-0XB0CPU 224XP AC/DC/relayManufacturer: SiemensView Details
-
6ES7321-7RD00-0AB0Digital input moduleManufacturer: SiemensView Details -
6DD1688-1AB0SIMADYN D INTERFACE SUBMODULEManufacturer: SiemensView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
