PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- S7-400
- 6ES7416-2XN05-0AB0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES7416-2XN05-0AB0 central processing unit module
S7-400 6ES7416-2XN05-0AB0 is a central processing unit module in the SIMATIC S7-400 automation systems. It is used to perform the assigned signal, control or interface function in the installed equipment.
Its documented configuration includes cir synchronization time, basic load of 100 ms, power loss, max of 5 W, backup current, typ of 125 µA; up to 40 °C, and feeding of external backup voltage to cpu of 5 V DC to 15 V DC. During operation, the central processing unit module performs its assigned central processing unit module function through the documented power, signal and communication interfaces.
Its documented configuration includes cir synchronization time, basic load of 100 ms, power loss, max of 5 W, backup current, typ of 125 µA; up to 40 °C, and feeding of external backup voltage to cpu of 5 V DC to 15 V DC. During operation, the central processing unit module performs its assigned central processing unit module function through the documented power, signal and communication interfaces.
BEFORE YOU BUY
Confirm the complete central processing unit module
ACTUAL APPLICATIONS
Where 6ES7416-2XN05-0AB0 Fits Across Industrial Application Areas
Applications span oil processing, chemical production and water utilities, subject to compatible equipment, interfaces and the installed configuration.
-
01 · WATER & WASTEWATER
Water Supply and Municipal Wastewater Treatment Facilities
Raw water pumping stations and municipal sewage treatment plants.Drinking water treatment facilities and wastewater collection pumping stations. -
02 · OIL & GAS
Oil Production, Gas Processing and Pipeline Facilities
Oilfield wellheads and gathering stations serving upstream production facilities.Pipeline pumping stations and gas compression facilities serving transmission networks. -
03 · CHEMICAL PROCESSING
Chemical Production, Reaction Vessels and Distillation Equipment
Chemical reactors and distillation columns in continuous production plants.Storage tanks and transfer equipment in chemical processing facilities.
Technical specifications for 6ES7416-2XN05-0AB0
-
Product Model6ES7416-2XN05-0AB0
-
Product Parameterscentral processing unit module
-
In stock1 unit
-
ManufacturerSiemens
-
CiR synchronization time, basic load100 ms
-
Power loss, max.5 W
-
Backup current, typ.125 µA; up to 40 °C
-
Feeding of external backup voltage to CPU5 V DC to 15 V DC
-
Number of clock memories8; in 1 memory byte
-
Resolution1 ms
-
Transmission rate, max.12 Mbit/s
-
User data per address area, max.32 byte
-
max. cycle32 ms
-
shortest clock pulse1 ms; 0.5 ms without use of SFC 126, 127
-
from interface 5 V DC, max.90 mA; At each DP interface
-
Backup time, max.See reference manual, module data, Chapter 3.3
-
Number of free cycle OBs1; OB 1
-
via interface module0
-
Output current of the interface, max.150 mA
View all additional
Alternative Names
6ES7416 2XN05 0AB0
SIMATIC S7-400 automation systems central processing unit module
Siemens central processing unit module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 6ES7416-2XN05-0AB0 to the installed SIMATIC S7-400 automation systems
Siemens 6ES7416-2XN05-0AB0 is a central processing unit module used in the SIMATIC S7-400 automation systems. Use 6ES7416-2XN05-0AB0 for cyclic logic, program execution and distributed I/O coordination in the documented SIMATIC S7-400 automation systems. Preserve the approved hardware configuration and program backup.
Maintain the documented network names, addresses, topology and controller interfaces assigned to 6ES7416-2XN05-0AB0. Validate reachable devices before enabling controlled equipment. Confirm min. (0 °C), max. (60 °C), the exact mechanical position and approved system configuration before connection.
Load the approved project to 6ES7416-2XN05-0AB0, review diagnostics and test interlocks, I/O updates, alarms and commanded sequences before returning the plant section to service. Use qualified personnel, keep the applicable manufacturer instructions at the work location and retain the measured results with the equipment service record.
Features:
- Exact identity: 6ES7416-2XN05-0AB0
- Product class: central processing unit module
- Family: SIMATIC S7-400 automation systems
The Siemens 6ES7416-2XN05-0AB0 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 6ES7416-2XN05-0AB0 identity before exchange
Replace 6ES7416-2XN05-0AB0 only after matching the full article identity, central processing unit module, resolution (1 ms) and documented system role. Confirm that the installed hardware version and controlled configuration agree with the manufacturer record.
Before removal, photograph the product label, mounting position, from interface 5 v dc, max. (90 mA; At each DP interface), cable routing, shields, earth connections and adjacent assemblies. Preserve the approved program, parameter set or network configuration needed for recovery.
After installation, verify number of connectable ims (total), max. (6) and number of connectable im 463s, max. (4; IM 463-2). Review diagnostics, test the affected function at a safe operating point and record the final maintenance acceptance evidence.
Features:
- Exact identity: 6ES7416-2XN05-0AB0
- from interface 5 V DC, max.: 90 mA; At each DP interface
- Number of connectable IM 463s, max.: 4; IM 463-2
The Siemens 6ES7416-2XN05-0AB0 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical values prepared for 6ES7416-2XN05-0AB0
- Installation checks matched to SIMATIC S7-400 automation systems
- Exact Siemens identity required before service
Documentation for Siemens 6ES7416-2XN05-0AB0 must match the installed equipment and complete product identity; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size23.3 × 29.6 × 4.1 cm
-
Shipping weight0.856 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85389091
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7416-2XN05-0AB0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which hw functional status value must match when sourcing 6ES7416-2XN05-0AB0?
6ES7416-2XN05-0AB0 is documented with HW functional status 04. Compare this value, the full order number and installed system record before purchase. -
How should engineering verify firmware version for 6ES7416-2XN05-0AB0?
Use the manufacturer data and installed configuration to confirm Firmware version V5.3; retain the checked value in the replacement work pack. -
What does resolution 1 ms mean for installing 6ES7416-2XN05-0AB0?
The installation must satisfy Resolution 1 ms together with the documented power, interface, mounting and environmental limits for 6ES7416-2XN05-0AB0. -
Which compatibility records should accompany a distributor quote for 6ES7416-2XN05-0AB0?
Provide the complete model, quantity, nameplate photos, installed SIMATIC S7-400 automation systems, required interfaces and destination country. Include project or network records when relevant. -
Can 6ES7416-2XN05-0AB0 replace a similar central processing unit module without configuration changes?
Do not decide by appearance. Match the full order number, hardware or firmware level, integrated (for program) 2.8 Mbyte, interfaces and approved project before exchange. -
What should receiving inspection check on 6ES7416-2XN05-0AB0 before installation?
Check the exact label, housing, connectors, terminals, mounting points and supplied accessories. Reject damage, contamination, bent pins or unreadable identification. -
Which connection evidence should maintenance capture before removing 6ES7416-2XN05-0AB0?
Photograph connector keying, cable destinations, port assignments, shields, protective earth and adjacent modules. Save the controlled configuration and current diagnostics. -
What commissioning result confirms 6ES7416-2XN05-0AB0 is ready for service?
Confirm normal diagnostics, communication and affected equipment response, then test the documented central processing unit module function under controlled conditions and record acceptance.
READY TO VERIFY YOUR PART?
Get a 6ES7416-2XN05-0AB0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
