PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- S7-400
- 6ES7960-1AA04-0XA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES7960-1AA04-0XA0 Controller Synchronisation Interface Module
Siemens 6ES7960-1AA04-0XA0 is the V4 synchronisation module for the documented SIMATIC S7-400H system. It provides the dedicated connection used by compatible redundant controller arrangements.
The module operates with a synchronisation patch cable of up to ten metres and draws power from the associated CPU. Controller generation, module execution and cable selection must match the H-system documentation; a similar appearance does not establish interchangeability.
The module operates with a synchronisation patch cable of up to ten metres and draws power from the associated CPU. Controller generation, module execution and cable selection must match the H-system documentation; a similar appearance does not establish interchangeability.
BEFORE YOU BUY
Confirm the complete controller synchronisation interface module
ACTUAL APPLICATIONS
Application context for 6ES7960-1AA04-0XA0
6ES7960-1AA04-0XA0 is a controller synchronisation interface module for SIMATIC S7-400H Synchronisation V4. It supports compatible automation projects in power generation, chemical processing, water and wastewater. Suitability depends on the configured system, connected interfaces and documented operating limits.
-
01 · POWER GENERATION
Power Generation and Industrial Energy
Electric Power Generation ControlIndustrial Cogeneration Process Automation -
02 · CHEMICAL PROCESSING
Chemical Manufacturing and Process Automation
Chemical Production Process AutomationPetrochemical Processing and Production -
03 · WATER & WASTEWATER
Water Supply and Wastewater Treatment
Municipal Water Supply ControlIndustrial Wastewater Treatment Processes
Technical specifications for 6ES7960-1AA04-0XA0
-
Product Model6ES7960-1AA04-0XA0
-
Product ParametersController Synchronisation Interface Module
-
In stock9 units
-
ManufacturerSiemens
-
Maximum synchronisation patch cable10 m
-
Maximum CPU supply current210 mA
-
Typical power loss1.1 W
View all additional
Alternative Names
6ES7960-1AA04-0XA0
SIMATIC S7-400H Synchronisation V4 Controller Synchronisation Interface Module
S7-400H Synchronisation V4 10 m maximum synchronisation patch cable
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6ES7960-1AA04-0XA0 controller synchronisation interface module
Integrate 6ES7960-1AA04-0XA0 only in the documented SIMATIC S7-400H Synchronisation V4 configuration. Match the installed interfaces and the engineered application before selecting this controller synchronisation interface module.
The module operates with a synchronisation patch cable of up to ten metres and draws power from the associated CPU. Controller generation, module execution and cable selection must match the H-system documentation; a similar appearance does not establish interchangeability.
Use the applicable controlled instructions for SIMATIC S7-400H Synchronisation V4. Validate the assigned signals, communication or output behaviour and retain the accepted configuration for 6ES7960-1AA04-0XA0.
Features:
- Maximum synchronisation patch cable: 10 m
- Maximum CPU supply current: 210 mA
- Typical power loss: 1.1 W
The 6ES7960-1AA04-0XA0 controller synchronisation interface module requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 6ES7960-1AA04-0XA0 controller synchronisation interface module
Confirm the complete 6ES7960-1AA04-0XA0 identity and installed SIMATIC S7-400H Synchronisation V4 execution before replacement. Compare the connector arrangement and the technical values required by the existing project.
Record the controller synchronisation interface module connections, project settings and associated accessories. Preserve the accepted configuration and isolate the affected circuits before exchange.
After fitting 6ES7960-1AA04-0XA0, restore the verified configuration and test every affected function. Retain the identification, diagnostic results and final acceptance record for the SIMATIC S7-400H Synchronisation V4 equipment.
Features:
- Maximum synchronisation patch cable: 10 m
- Maximum CPU supply current: 210 mA
- Typical power loss: 1.1 W
The 6ES7960-1AA04-0XA0 controller synchronisation interface module requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 6ES7960-1AA04-0XA0 controller synchronisation interface module must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size2.5 × 5.3 × 14cm
-
Shipping weight0.07kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7960-1AA04-0XA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What patch-cable length is allowed for V4 synchronisation?
For 6ES7960-1AA04-0XA0, the documented maximum synchronisation patch cable is 10 m. Compare this limit with the installed SIMATIC S7-400H Synchronisation V4 configuration. -
How much CPU current must this synchronisation module allow?
For 6ES7960-1AA04-0XA0, the documented maximum cpu supply current is 210 mA. Compare this limit with the installed SIMATIC S7-400H Synchronisation V4 configuration. -
What power loss is documented for the V4 interface?
For 6ES7960-1AA04-0XA0, the documented typical power loss is 1.1 W. Compare this limit with the installed SIMATIC S7-400H Synchronisation V4 configuration. -
Is the V4 interface a general-purpose Ethernet port?
No. 6ES7960-1AA04-0XA0 is the documented S7-400H synchronisation interface. Use only the applicable H-system connection and patch cable. -
Can the synchronisation module be selected from appearance alone?
The complete 6ES7960-1AA04-0XA0 article, V4 execution and compatible S7-400H CPU arrangement must be checked together. -
What should be validated after restoring an H synchronisation link?
For 6ES7960-1AA04-0XA0, verify the configured redundant-controller relationship, link indication and documented H-system diagnostics before acceptance. -
What identification supports ordering the SIMATIC S7-400H Synchronisation V4 spare?
Specify 6ES7960-1AA04-0XA0, quantity and the installed SIMATIC S7-400H Synchronisation V4 arrangement. Include label and connector photographs, and identify any required accessories separately. -
Which incoming checks apply to the controller synchronisation interface module?
Compare the 6ES7960-1AA04-0XA0 label, connector condition and supplied accessories with the quotation. Verify the accepted SIMATIC S7-400H Synchronisation V4 configuration before replacing the installed item.
READY TO VERIFY YOUR PART?
Get a 6ES7960-1AA04-0XA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
