PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- S7-400
- 6ES7416-3FS07-0AB0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES7416-3FS07-0AB0 supports configured plant operation
Siemens 6ES7416-3FS07-0AB0 is the SIMATIC S7-400 CPU 416F-3 PN/DP with 16 MB of work memory, split into 8 MB for code and 8 MB for data. The F-CPU combines an integrated MPI/DP interface, two-port PROFINET and a slot for the optional IF 964-DP interface.
Its communication, diagnostics and process-message functions must be configured together with the approved standard and safety project. Check the rack power budget, interface assignments and restart procedure; operating power is supplied through the S7-400 backplane, not a separate CPU load terminal.
Its communication, diagnostics and process-message functions must be configured together with the approved standard and safety project. Check the rack power budget, interface assignments and restart procedure; operating power is supplied through the S7-400 backplane, not a separate CPU load terminal.
BEFORE YOU BUY
Preserve the station acceptance baseline
ACTUAL APPLICATIONS
Where 6ES7416-3FS07-0AB0 supports supervised plant operation
The exact Siemens specifications document alarm handling, controlled I/O-device activation and media redundancy. These scenarios still require a complete engineered control and safety configuration.
-
01 · OPERATOR ALARMS
Route configured process messages
Configure the supported alarm and process-diagnostic functions to deliver meaningful equipment events to the supervisory system. Allocate the relevant message blocks and receiver connections, distinguish their documented limits and confirm that the operator display reflects the approved plant response to each event. -
02 · TOOL STATIONS
Manage changing I/O device groups
Use the documented device activation and partner-port functions where an engineered tool station connects different supported I/O groups. Preserve the configured device identities and activation sequence, checking the per-tool and concurrent-call limits before testing a change under controlled operating conditions. -
03 · NETWORK PATHS
Provide a planned ring path
Configure supported PROFINET media redundancy when the network design requires an alternative path after a cable interruption. Coordinate the ring devices and recovery behavior with the application timeout settings; a redundant network path does not replace the validated safety response or create redundant CPU execution.
Technical specifications for 6ES7416-3FS07-0AB0
-
Product Model6ES7416-3FS07-0AB0
-
Product ParametersFail-Safe Process Control CPU
-
In stock1 unit
-
ManufacturerSiemens
-
Program work memory8 MB
-
Data work memory8 MB
-
Typical bit-operation time12.5 ns
-
Integrated network interfacesMPI/DP and two-port PROFINET
-
5 V backplane current1.3 A typical; 1.6 A maximum
-
24 V backplane current300 mA maximum; 150 mA per DP interface
-
Maximum power loss8 W
-
Diagnostic buffer capacityUp to 3200 entries; default 120
-
Operating temperature range0 to 60 deg C
-
Rack space requiredTwo slots
View all additional
Alternative Names
6ES7416-3FS07-0AB0
CPU 416F-3 PN/DP
SIMATIC S7-400 CPU416F PN/DP
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SIMATIC S7-400 F-CPU INTEGRATION
Check diagnostics, I/O roles and the approved project
Siemens 6ES7416-3FS07-0AB0 is the SIMATIC S7-400 CPU 416F-3 PN/DP with 16 MB of work memory, split into 8 MB for code and 8 MB for data. The F-CPU combines an integrated MPI/DP interface, two-port PROFINET and a slot for the optional IF 964-DP interface.
Its communication, diagnostics and process-message functions must be configured together with the approved standard and safety project. Check the rack power budget, interface assignments and restart procedure; operating power is supplied through the S7-400 backplane, not a separate CPU load terminal.
Use the supported STEP 7 and safety-engineering environment for the actual installed firmware. The CPU specifications identify STEP 7 V5.5 with HSP 262 as the baseline; verify the safety project, installed interface option and complete acceptance requirements separately.
Features:
- 8 MB program and 8 MB data work memory
- Readable service data and configurable diagnostic buffer
- System-power and interface limits checked separately
The Siemens 6ES7416-3FS07-0AB0 requires the configured F-system, network behavior and diagnostic requirements to be checked for reliable system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Identify 6ES7416-3FS07-0AB0 as CPU 416F-3 PN/DP and retain the approved station project and acceptance records. Capture diagnostics and readable service data before removing the old module where possible, and record every installed interface and communication assignment.
Arrange the required process shutdown and power isolation before exchanging the CPU. Maintain the two-slot rack location and identified connectors, restore the approved memory-card arrangement, and follow the S7-400 attachment and fixing instructions without forcing the backplane connection.
After restoring the compatible configuration, check F-I/O and network diagnostics and complete the required acceptance before restarting. The exact Mall entry is currently PM300 Active, with phase-out dated 1 October 2026; availability and supplied condition must still be confirmed in the quotation.
Features:
- Capture diagnostics before module removal
- Restore the approved F-system configuration
- Complete acceptance before automatic restart
The Siemens 6ES7416-3FS07-0AB0 CPU 416F-3 PN/DP requires replacement verification of diagnostics, configured I/O and safety acceptance before release to operation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software, certificates, and other items are not included with this equipment unless listed in the stock item description.
Features:
- Available Siemens document references are confirmed before order
- Software licensing and project backups remain the customer's responsibility
- Accessories are supplied only when listed in the quotation
Documentation for the Siemens 6ES7416-3FS07-0AB0 requires the CPU 416F entries and applicable safety-engineering documents to be reviewed together; confirm manual availability in the written quotation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size23.3 × 30.2 × 6.6 cm
-
Shipping weightApprox. 0.90 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537101190
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7416-3FS07-0AB0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Is a 200 ms ring recovery specification an interruption-free switchover promise?
No. Siemens lists a typical 200 ms changeover time after a line interruption for the supported media-redundancy arrangement. Check device and application watchdogs against that behavior; do not describe this specification as zero-time or interruption-free recovery. -
Why might a retrieved diagnostic history contain far fewer than 3200 entries?
The CPU diagnostic buffer is adjustable, with 3200 as the maximum entry count and 120 as the documented default. Check the installed configuration and capture the available service data before maintenance instead of assuming the maximum history has been enabled. -
How must simultaneous RDREC and WRREC requests be scheduled across interfaces?
The specification permits eight parallel jobs per interface for RDREC and likewise for WRREC, with no more than 32 across all external interfaces for each listed function. Schedule the actual service requests within these limits rather than launching an unrestricted commissioning scan. -
Do Ethernet and MPI time synchronization have the same stated accuracy?
No. The CPU table lists a maximum system time difference of 10 ms with Ethernet synchronization and 200 ms with MPI synchronization. Choose and verify the synchronization method for the required event-ordering accuracy; these figures do not describe CPU instruction speed. -
Can an IM 467 simply be added alongside an existing CP 443-5 Extended?
The official hardware-configuration table prohibits that mixed operation and also restricts combining IM 467 with a CP 443-1 operating in PROFINET IO mode. Review the existing communication-module population before approving an expansion purchase. -
Why are all 96 total connections not available for ordinary S7 communication?
Siemens lists 96 total connection resources, reserves one for PG and one for OP communication, and identifies 94 as suitable for S7 communication. Include engineering and operator access in the connection budget instead of assigning the entire total to application links. -
Does partner-port hot-swapping authorize removal of the central CPU while operating?
No. The cited function concerns supported I/O devices and partner ports, including configured tool-device arrangements. It is not permission to remove the CPU under power. CPU exchange requires the appropriate process safe state, station procedure and controlled restart. -
What thermal allowance should be retained when this F-CPU is installed in a dense rack?
The exact CPU specifications list 6.5 W typical power loss, 8 W maximum and an operating ambient range of 0 to 60 degrees C. Include the other rack equipment and the actual enclosure conditions in the thermal assessment; a cabinet room temperature alone does not prove the module environment is within limits.
READY TO VERIFY YOUR PART?
Get a 6ES7416-3FS07-0AB0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
