Woodward

Circuit Breaker Relay Module

 LS-5 Series relays
Power supply:12/24 Vdc 
Rated (Vrated):69/120 Vac
Max. value (Vmax):86/150 Vac
Input range:12/24 Vdc (8 to 40 Vdc)
Intrinsic consumption:max.~ 5 W.

3200 P2 genset control model

Part Number:EasyGen 3200-1
Discrete Input Range:12/24 Vdc
Power Consumption：< .15 W
Power Supply：12/24 Vdc
Operation Temperature:-30 to 80 °C
Storage Temperature:-20 to 70 °C
Humidity:95%, non-condensing
 P/n : 8440-2051

Genset Controller

EASYGEN 3200-5P2
Voltage Monitoring: 50–600 V AC
Current Monitoring: 1–5 A
Frequency Range: 40–70 Hz
Digital Inputs: 16
Digital Outputs: 8
Analog I/O: 4–20 mA/0–10 V DC
Operating Temperature: -40°C to +85°C
Storage Temperature: -50°C to +105°C

CPC-II Current-To-Pressure Converter

PRESSURE REGULATING VALVE CONTROL
ELECTROHYDRAULIC
10 BAR
ZONE 2
SIMPLEX
SINGLE ACTING STEAM TURBINE VALVE SERVO CONTROL
(CPC-II)

Marine CPC Valve

PLC MODULE
Marine CPC Valve 
INTERFACE CONTROL
MODBUS
W/ LED INDICATION
SINGLE PORT

Analog current loops at 4-20 mA

Input/Output: 4–20 mA
Resolution: 12–16 bits
Typical Accuracy: ±0.1% of full scale at 25°C.
Temperature Drift: ±0.02% per °C 
Voltage: 24 VDC nominal 
Power Consumption: ≤5 W
Channel-to-Channel Isolation: ≤1500 VDC
Operating Temperature: -40°C to +85°C (-40°F to +185°F).
Humidity: 0–95% non-condensing.
Vibration Resistance: 5–2000 Hz, 5 g RMS

Analog I/O Module

MICRONET SIMPLEX LV DISCRETE FTM
INPUT VOLTAGE RATING: 27.4 AMP 18-32 VDC
OUTPUT VOLTAGE RATING: 16 AMP 24VDC
POWER SUPPLY INPUT: (18 TO 32) V (DC)
SIGNAL TO ACTUATOR: 0 TO 200 MA
NETWORK ISOLATION: 0–60 HZ: 1000 VRMS

Digital Synchronizer Load Control Module

DSLC MASTER 
SYNCHRONIZER AND LOAD CONTROL
MICROPROCESSOR
3PHASE
DIGITAL
IMPORT/EXPORT

SYNCHRONIZING UNIT

Input Voltage:110/220 VAC or 24 VDC
Frequency Range:50 Hz or 60 Hz
Frequency: ±10%
Operating Temperature:-10°C to +60°C (14°F to 140°F)
Storage Temperature:-40°C to +85°C (-40°F to +185°F)
Humidity:5–95% RH

Pm Motor Control

MOTOR CONTROL
220 V AC
PERMANENT MAGNET
SCREW CLAMP TERMINALS

ENGINE MANAGEMENT SYSTEM

ENGINE MANAGEMENT SYSTEM
Pentium® 133 MHz PC
32 MB of RAM
DOS 6.22, Windows® 95
DIGITAL
100 HZ MAX. FREQUENCY
5 V OUTPUT
RS-232 COMMUNICATION PORT

Dual Reader Module

GENERATOR CONTROLLER
ANALOG INPUT: 0-5 VDC OR 4-20 MA DC
DISCRETE INPUTS (16): 
5 MA EACH WHEN CLOSED TO SWITCH COMMON 
(TERMINAL 65) 
MAXIMUM 80 MA TOTAL
POTENTIAL TRANSFORMER INPUT: 150 VAC MAX

Analog I/O Module

Number of Channels: Typically 8 to 16 input channels 
Voltage: ±10 V, 0–10 V, or 4–20 mA signals.
Resolution: 12-bit or higher 
Accuracy: ±0.1% of full scale or better
Voltage: 0–10 V or ±10 V
Current: 4–20 mA, configurable
Resolution: 12-bit or higher 
Power Supply: +24 VDC

Digital Control Module

Type: Digital Control Module
Voltage Input: 
Typically operates on 24V DC
Operating Temperature Range:  -40°C to +70°C
Storage Temperature Range: -40°C to +85°C

Micronet Ethernet Module

Series: MicroNet Digital Controllers
Flash Memory: 64 MB
Input Voltage: 110 VAC/125 VDC
Features: 10/100 Base T Ethernet
Maximum Stub Length: 300 mm
Dimensions: 9.50 x 10.50 x 1.00
Model: 10BaseT Ethernet Connector
Potential Voltage Range: 80-150

STEAM TURBINE

TG Turbine Governor - TG-13 Screw Speed Setting, 12 ft-lb Output, 2400-4400 RPM, CW Features: 
• Low cost 
• Speed droop control 
• Weatherproof 
• Self-contained sump 
• NEMA "A" 
• 16 N?m (12 ft-lb) output

OPERATOR INTERFACE

Enclosure Type:NEMA 4
Features:Program upload/download capability
Input Voltage:18–32 Vdc
Keypad/Display:30 Analog Keys
Operating Temperature:-13C to +149F
Output Type:
2 Actuator Outputs, 
8 Relay Outputs
6 Programmable Current Outputs
Resolution:2 Rows of 12 Characters

TMR Kernel PS Module

MicroNet TMR Kernel PS Module
Output Current: 10 A maximum
Output Current max. 10 A
Standards CE (EMC) and CSA
Power Consumption 24 VDC
Output Voltage 5 VDC ±5%
Chassis MicroNet TMR
Input Voltage 24 VDC ±10%
Features One LED for Power Supply Health
CPU TMR040

Load Sharing Module

9907175
LOAD SHARING MODULE
ISOCHRONOUS & DROOP LOAD-SHARING
24 VDC SUPPLY
WITHOUT PWM OUTPUT SURGE PROTECTION
FOR DIGITAL SPEED CONTROL

speed control device

Model Type:peed Control, Isochronous
Prime Mover Type:Diesel or Gas Turbine
VDC Power Supply:24
Power Supply: 24 VDC 
Frequency Range: Operates within a 3000-6000 Hz range.
Input/Output: Compatible with 
Woodward actuators 1712, 1724, 512, and 524.
Ambient Temperature Range: -40°C to 167°C (-40°F to 334°F).
Power Consumption: Up to 95 watts.

LOW VOLTAGE 2301A LOAD SHARING AND SPEED CONTROL

Drive Capacity: Max. 2 A 
Speed Stability: ±0.25% of rated speed 
Load Sharing Deviation: ±2% of rated power 
Standard Range: -40°C to +85°C
Storage Temperature: -50°C to +100°C
Input Voltage Range: Typically 18–40 V DC
Power Consumption: <5 W
Load Sharing Signal: Analog (0–10 V or 4–20 mA) 
Speed Feedback:50 Hz–10 kHz