PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Yokogawa
- Yokogawa Centum XL
- NFCP501-W15 S2
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
NFCP501-W15 S2 autonomous controller CPU module
Yokogawa NFCP501-W15 S2 is an autonomous controller CPU module in the Yokogawa STARDOM FCN-500 autonomous controllers. It is used to execute the configured control logic, sequencing and equipment interlocks.
Its documented configuration includes processor of Intel Atom E3815, 1.46 GHz, main memory of 256 MB with ECC, static ram of 2 MB ECC, battery backed, and flash memory of 1 GB onboard. During operation, the autonomous controller CPU module processes the configured program and coordinates the connected I/O, communication and control functions.
Its documented configuration includes processor of Intel Atom E3815, 1.46 GHz, main memory of 256 MB with ECC, static ram of 2 MB ECC, battery backed, and flash memory of 1 GB onboard. During operation, the autonomous controller CPU module processes the configured program and coordinates the connected I/O, communication and control functions.
BEFORE YOU BUY
Confirm the complete autonomous controller CPU module
ACTUAL APPLICATIONS
Application context for NFCP501-W15 S2
Applications are organized by industry, operating scenario, system category and the specific equipment served.
-
01 · OIL & GAS
Remote Well Pads and Pipeline Metering Stations
Autonomous Control SystemsRemote well-pad process skidsPipeline metering station instruments -
02 · WATER & WASTEWATER
Remote Pumping Stations and Treatment Process Units
Distributed Utility Control SystemsRemote pump station equipmentTreatment process package units -
03 · POWER GENERATION
Renewable Plants and Auxiliary Control Stations
Remote Asset Control SystemsSolar balance-of-plant skidsAuxiliary generation station equipment
Technical specifications for NFCP501-W15 S2
-
Product ModelNFCP501-W15 S2
-
Product ParametersAutonomous controller CPU module
-
In stock1 unit
-
ManufacturerYokogawa
-
ProcessorIntel Atom E3815, 1.46 GHz
-
Main Memory256 MB with ECC
-
Static RAM2 MB ECC, battery backed
-
Flash Memory1 GB onboard
-
External MediaSDHC 4 to 32 GB, Class 10
-
Serial Port1 x RS-232-C, D-sub 9-pin
-
Ethernet Ports2 x RJ45
-
Ethernet Rates10/100/1000 Mbit/s
-
I/O InterfaceDuplex SB bus
-
Supply Voltage5 V DC ±5%
-
Maximum Current1200 mA
-
CPU StyleS2
-
Function SetExtended functions
-
Temperature OptionExtended temperature range
-
Contaminant OptionBasic type, no explosion protection
View all additional
Alternative Names
NFCP501 W15 S2
Yokogawa autonomous controller CPU module
Yokogawa STARDOM FCN-500 autonomous controllers autonomous controller CPU module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match NFCP501-W15 S2 to the installed Yokogawa STARDOM FCN-500 autonomous controllers
Yokogawa NFCP501-W15 S2 is a autonomous controller CPU module for the Yokogawa STARDOM FCN-500 autonomous controllers. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare flash memory (1 GB onboard), external media (SDHC 4 to 32 GB, Class 10) and serial port (1 x RS-232-C, D-sub 9-pin) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: NFCP501-W15 S2
- Product class: autonomous controller CPU module
- Family: Yokogawa STARDOM FCN-500 autonomous controllers
The Yokogawa NFCP501-W15 S2 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete NFCP501-W15 S2 identity before exchange
Replace NFCP501-W15 S2 only after matching the complete article code, autonomous controller CPU module, installed Yokogawa STARDOM FCN-500 autonomous controllers role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: NFCP501-W15 S2
- Product class: autonomous controller CPU module
- Family check: Yokogawa STARDOM FCN-500 autonomous controllers
The Yokogawa NFCP501-W15 S2 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical data prepared for NFCP501-W15 S2
- Product family: Yokogawa STARDOM FCN-500 autonomous controllers
- Exact Yokogawa identity required before service
Documentation for Yokogawa NFCP501-W15 S2 must match the installed equipment and complete product identity; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size6.5 × 14.8 × 13.0 cm
-
Shipping weight0.86 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371098
-
OriginJapan
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about NFCP501-W15 S2
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How should technicians commission NFCP501-W15 S2 after installation?
Confirm the documented supply and wiring, restore the controlled configuration, inspect diagnostics and test the affected autonomous controller CPU module function at a safe operating point. -
What service evidence should be retained after work on NFCP501-W15 S2?
Keep the receiving inspection, original connection record, configuration backup, measurements, diagnostic results and final acceptance record for NFCP501-W15 S2. -
Which nameplate details identify the correct NFCP501-W15 S2 for a distributor quotation?
Quote NFCP501-W15 S2 with the complete suffix, autonomous controller CPU module, Yokogawa STARDOM FCN-500 autonomous controllers, quantity and clear nameplate photographs. -
What should engineering compare before integrating NFCP501-W15 S2 into the installed system?
Compare the documented Yokogawa STARDOM FCN-500 autonomous controllers role, supply class, communication or signal interface, firmware or hardware revision and companion equipment. -
Which incoming-inspection checks apply to NFCP501-W15 S2?
Inspect the NFCP501-W15 S2 label, connector keying, housing or circuit board condition, seals, terminals and signs of transport damage. -
Can another article in the same Yokogawa STARDOM FCN-500 autonomous controllers family directly replace NFCP501-W15 S2?
Do not assume interchangeability. Match the full article code, technical ratings, interface count, protocol, configuration and installed mechanical arrangement. -
Which connection records should maintenance capture before removing NFCP501-W15 S2?
Photograph each connector, cable label, shield, earth conductor, network path and adjacent module before disconnecting NFCP501-W15 S2. -
Which configuration data should be backed up before exchanging NFCP501-W15 S2?
Retain the applicable PLC, HMI, drive, network or device configuration and record firmware, addresses, parameters and diagnostic messages.
READY TO VERIFY YOUR PART?
Get a NFCP501-W15 S2 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
