PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Yokogawa
- Yokogawa ProSafe-RS
- S2CP471-01 S1
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
S2CP471-01 S1 Safety controller processor module
Yokogawa S2CP471-01 S1 is a ProSafe-RS processor module for approved SSC60 and S2SC70 safety control units. The -01 specification has no explosion protection and is qualified for an ISA G3 environment. Two S2CP471 processors can form a dual-redundant pair in a duplexed control unit.
The processor supports SIL 3 applications and uses a replaceable S9450FE backup battery. ProSafe-RS R3.01 or later is required for SSC60, while S2SC70 requires R4.01 or later; the listed software releases also need the S2CP471 support patch. The recommended battery interval is three years at an average ambient temperature of 30 °C or below.
The processor supports SIL 3 applications and uses a replaceable S9450FE backup battery. ProSafe-RS R3.01 or later is required for SSC60, while S2SC70 requires R4.01 or later; the listed software releases also need the S2CP471 support patch. The recommended battery interval is three years at an average ambient temperature of 30 °C or below.
BEFORE YOU BUY
Confirm the complete S2CP471-01 S1 identity
ACTUAL APPLICATIONS
Application fields for S2CP471-01 S1
These broad application fields reflect the documented function and technical characteristics of S2CP471-01 S1.
-
01 · OIL & GAS
Petroleum Refining and Natural Gas
Offshore petroleum and onshore natural gasPetroleum refining and downstream petrochemical sectors -
02 · CHEMICAL PROCESSING
Industrial Chemistry and Chemical Engineering
Industrial chemistry and fine chemical sectorsSpecialty chemistry and industrial petrochemical sectors -
03 · POWER GENERATION
Thermal Power and Renewable Energy
Hydroelectric power and conventional electricity sectorsRegional electricity and renewable energy sectors
Technical specifications for S2CP471-01 S1
-
Product ModelS2CP471-01 S1
-
Spare ModelS2CP471-01
-
Product ParametersSafety controller processor module
-
In stock1 unit
-
ManufacturerYokogawa
-
Safety integritySIL 3
-
Supported control unitsSSC60 and S2SC70, approved suffixes only
-
Explosion-protection option-01: no explosion protection
-
Corrosion qualificationISA G3
-
Minimum software on SSC60ProSafe-RS R3.01
-
Minimum software on S2SC70ProSafe-RS R4.01
-
Backup battery1 x S9450FE
-
Recommended battery interval3 years at average ambient ≤30 °C
-
Redundant processor count2 in a duplexed control unit
View all additional
Alternative Names
S2CP471-01 S1
ProSafe-RS
Safety controller processor module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate S2CP471-01 S1 within ProSafe-RS
Fit S2CP471-01 only in the SSC60 or S2SC70 control-unit suffixes listed for the non-explosion-protected processor. A duplexed unit uses two S2CP471 modules; the physical processor slot alone does not establish compatibility with every ProSafe-RS control unit.
Confirm ProSafe-RS R3.01 or later for SSC60 and R4.01 or later for S2SC70. Apply the S2CP471 support patch where required for R3.01, R3.02 and R4.01 through R4.04 before integrating the processor into the operating configuration.
Check the fitted S9450FE battery and the required upgrade hardware, including the air deflector on the specified wide-temperature control units. Validate processor health, redundant operation and the application under the approved ProSafe-RS procedure.
Features:
- Safety integrity: SIL 3
- Supported control units: SSC60 and S2SC70, approved suffixes only
- ProSafe-RS
Use S2CP471-01 S1 only within the documented ProSafe-RS arrangement and applicable installation instructions.
INTERCHANGEABILITY
Replace S2CP471-01 S1 within ProSafe-RS
An S2CP471 spare must match the -01 protection specification and the installed safety-control-unit suffix. User replacement of an S2CP471 in a dual-redundant configuration is supported, but replacing an SCP461 with S2CP471 is a different upgrade activity.
The SCP461-to-S2CP471 upgrade must be performed by an authorized service engineer using the appropriate S2CP471KT kit. SCP461 and S2CP471 cannot coexist as a redundant pair, and an installed S2CP471 must not be replaced by SCP461.
Preserve the processor modification-history label and verify software patches, battery status and any required air deflector. Following exchange, confirm the two processors’ normal and redundant status and complete the required safety application checks.
Features:
- Safety integrity: SIL 3
- Supported control units: SSC60 and S2SC70, approved suffixes only
- ProSafe-RS
Use S2CP471-01 S1 only within the documented ProSafe-RS arrangement and applicable installation instructions.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Exact-model technical data for S2CP471-01 S1
- Document applicability checked against the complete identity
- Directory links by subcategory and brand
Documentation for S2CP471-01 S1 must match the installed product identity and supplied configuration.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Product size3.20 x 14.80 x 19.80 cm
-
Net weight0.58 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537101190
-
OriginJapan
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about S2CP471-01 S1
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Can S2CP471-01 be used in any S2SC70 cabinet (S2CP471-01 S1)?
No. The GS lists specific non-explosion-protected SSC60 and S2SC70 suffixes for S2CP471-01. -
Which software release is required on an SSC60 installation (S2CP471-01 S1)?
S2CP471 requires ProSafe-RS R3.01 or later on SSC60, with the specified support patch on listed releases. -
Can SCP461 and S2CP471 form a temporary redundant pair (S2CP471-01 S1)?
No. The GS prohibits their coexistence in a dual-redundant configuration. -
May users carry out the SCP461-to-S2CP471 upgrade themselves (S2CP471-01 S1)?
That upgrade requires an authorized Yokogawa service engineer and the applicable S2CP471KT kit. -
Which battery belongs to the S2CP471 processor (S2CP471-01 S1)?
The replaceable backup battery is S9450FE; the recommendation is three years at an average ambient of 30 °C or less. -
Can an installed S2CP471 be downgraded to SCP461 (S2CP471-01 S1)?
No. The GS states that an existing S2CP471 must not be replaced with SCP461. -
What distinguishes a processor spare from an upgrade-kit order (S2CP471-01 S1)?
An S2CP471 module and an S2CP471KT upgrade kit have different scopes; state the existing control-unit model and upgrade requirement. -
What must receiving confirm on an S2CP471-01 S1 shipment?
Inspect the full -01 S1 label, processor condition and quoted battery or kit contents; do not assume an upgrade kit accompanies a bare processor.
READY TO VERIFY YOUR PART?
Get a S2CP471-01 S1 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
S2CP471-01 S1Safety controller processor moduleManufacturer: YokogawaView Details
-
HCiRX08-TE-FD-NCOperator interfacesManufacturer: HoneywellView Details -
6SL3210-5BE25-5UV0Variable frequency driveManufacturer: SiemensView Details
-
ANB10D-410 S2Redundant ESB Bus NodeManufacturer: YokogawaView Details -
STG140-F1G-00000-1CSMART PRESSURE TRANSMITTERManufacturer: HoneywellView Details
-
AFV10D-S41101 S2Duplexed Field Control UnitManufacturer: YokogawaView Details -
HCiRD15-20XProximity DetectorManufacturer: HoneywellView Details
-
6GK7343-2AH11-0XA0AS-Interface communication processorManufacturer: SiemensView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
