ABB Bailey

SOE clock module

Input Voltage:24 V DC
Power Consumption:≤ 8 W 
Time Sync Input:IRIG-B (modulated/dc level)
Signal Voltage:TTL/RS-422 compatible (0–5 V DC)
Accuracy:±1 ms 
Time Resolution:1 ms
Isolation:1500 V AC

SOE Master Module

SPSEM11
SOE Master Module
Sequence of Events Recording
Accurate to millisecond level
Typically supports Ethernet, MODBUS, or other industrial protocols
Operating temperature range: -20°C to +60°C

Power Entry Panel Dual Chassis

PHARPSPEP21013
Power Entry Panel
Dual Chassis Design
Typically supports AC or DC input, depending on the application
Appropriate current based on load requirements

Termination Cable

Model: NKHS03-15
Type: Termination Cable
Cable Length: 15 meters
Interface Type: Compatible with ABB system modules

Analog Input Terminal Board

Model: NTRO12-A
Type: Analog Input Terminal Unit
Signal Type: High-Level Analog Signals
Number of Channels: 12
Product Type: Module_Termination_Unit

Analog Input Terminal Board

Model: NTAI05-A
Type: C
Number of Channels: 16 Channels
Signal Type: High-Level Analog Signals
Product Type: Module Termination Unit

Fiber Optic Remote I/O Termination Unit

Isolation Voltage:1.5 kV AC
Power Supply:24 V DC (±15%), 5 W typical
Redundancy:Dual fiber ports 
Fiber Interface:2x ST/PC connectors 
Data Rate:10 Mbps
Max. Distance:2 km 

Turbine Auto Sync Module

Input Voltages:100–120V AC
Voltage Diff: ±0.5%
Slip Freq: ±0.05 Hz
Operating Voltage:24/48/125V DC
Response Time:<20 ms

Turbine Protection Module

Operating Voltage:24/48/125V DC (±20%)
Response Time:<20 ms 
Speed Range:0–9999 RPM
Redundancy:2-out-of-3 (2oo3) voting logic
Overspeed Thresholds:2x Adjustable 
Input Signals:3x Magnetic Pickups (MPU) / Proximity Sensors
Trip Outputs:3x Relay Contacts (NO/NC, 5A @ 250V AC)

Analog Control Station

Operating Voltage:24V DC (±10%), 3W typical
Accuracy:±0.5% of full scale
Resolution:0.1% (for bargraph display)
Update Rate:100 ms
Isolation: 1.5 kV AC
MODE Switch: Toggle MAN/AUTO/CAS

Controller with Expanded Memory

Processor:32-bit ARM
Base Memory:512MB DDR4 RAM
Expanded Memory:2GB Flash
Execution Speed:0.05ms/1k instructions
I/O Scan Time:≤1ms (for 1000 I/O points)
Task Capacity:32 concurrent tasks
Digital I/O:Up to 2048 points
Analog I/O:Up to 512 channels
Input Voltage:24V DC (±15%) or 100-240V AC
Power Consumption:15W (typical)

Base Unit

Model Number: BP03
Order Code / Part Number: 2VAA008283R101
Rated Voltage (Ue): 24V DC
Insulation Voltage: 250V AC
Rated Frequency: 50/60 Hz

S+ Infi-net to Computer Interface Module

Processor: 32-bit RISC processor
Memory:8MB RAM
Power Supply: 24V DC ±10%
Power Consumption: <15W
Operating Voltage Range: 18-30V DC
Screw terminals for power
BNC or ST-type fiber for Infi-net
DB9 or DB25 for serial
RJ45 for Ethernet (if equipped)

IMAGING CARD

Supply Voltage:24V DC (±5%)
Power Consumption:25W (typical)
Isolation :1500V AC 
Sensor Interface:GigE Vision (2 ports)
Camera Support:Up to 8MP resolution @ 60fps
Pixel Depth:8/10/12-bit
Throughput:2.5 TOPS (INT8)

BRC400 Bridge Controller

CONTROLLER
HARMONY BRIDGE
BRC400
BUTTON CELL BATTERY
SINGLE PORT
RELAY OUTPUT

AIN-120 Analog Input Block

AIN-120 Analog Input Block
Input Channels: 16 single-ended/8
Voltage: ±10V, 0-10V, 1-5V
Current: 0-20mA, 4-20mA
Resolution: 16-bit (0.0015% of span)
Supply Voltage: 24V DC (±10%)
Power Consumption: 3.5W (typical)
Inrush Current: <2A for 20ms
Sampling Rate: 10ms/channel (max)

AOT 150 Analog Output Module

Output Channels: 16 single-ended
Voltage: 0-10V, ±10V
Current: 4-20mA, 0-20mA
Supply Voltage: 24V DC (±10%)
Power Consumption: 6W (typical), 8W (max)
Inrush Current: <2A for 20ms

Symphony Plus Bridge Controller Module

SPBRC410
Controller with Modbus TCP Interface
BRIDGE CONTROLLER
HARMONY RACK / SYMPHONY PLUS
W/ MODBUS TCP INTERFACE
INFI90 / BRC410 / SPBRC41000000

Digital Output Module

HARMONY BLOCK DIGITAL OUTPUT MODULE
3 AMP
24VDC
240VAC
16 OUTPUTS
FUSING/ON BOARD ELECTROMECHANICAL RELAYS
SPDT

AIN-220 Analog Input Module

Series: Harmony/800xA System
Model No.: P-HB-AIN-2200C100
Type: High-Density Analog Input Module
Voltage: ±10V, 0-10V, 1-5V
Current: 0-20mA, 4-20mA
Resolution: 16-bit (0.0015% of span)
Common Mode Rejection: >120dB @ 50/60Hz
Normal Mode Rejection: >60dB @ 50/60Hz

Digital I/O Module - Harmony Block I/O

DIO-400 Digital I/O Module - 
Harmony Block I/O 
(PHBDIO40010000)
Sixteen (16) isolated Digital Inputs; 
24 VDC, 48 VDC, 125 VDC, 120 VAC, 
and 240 VAC and eight (8) 
Isolated Digital Outputs; 
24 VDC at250mA and 48 VDC at 125 mA.

I/O Power Supply Module

NPCI03
I/O Power Supply Module 
24V DC power source
500V AC (input to output)
Input Voltage:5V DC  
Input Current:1.8A max
Output Voltage:24V DC (±0.5%, regulated)
Output Current:0.4A max (400 mA)
Output Power:9.6W (24V * 0.4A)
Ripple & Noise:< 50 mV peak-to-peak

CPU MODULE

1948024G1 
CPU MODULE
Supply Voltage:24V DC
Power Consumption:Typically 8W - 15W
Inrush Current:15A for 5ms
Isolation :500V AC

INTERFACE MODULE

1948021A1
DISCONTINUED BY MANUFACTURER
ASEA BROWN BOVERI
1948021-A1
SERIAL I/O INTERFACE MODULE