PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- ABB
- ABB Robots
- 3HAC048232-001
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
3HAC048232-001 REDUCTION GEAR RV550N-252.33
ABB 3HAC048232-001 is a REDUCTION GEAR RV550N-252.33 in the IRB 6700. It is used to perform the documented REDUCTION GEAR RV550N-252.33 function in the installed automation equipment.
Its documented configuration includes article number of 3HAC048232-001, gearbox type of RV-550N, reduction ratio of 252.33, and axis positions of Axis 2 / Axis 3. During operation, the REDUCTION GEAR RV550N-252.33 performs its assigned REDUCTION GEAR RV550N-252.33 function through the documented power, signal and communication interfaces.
Its documented configuration includes article number of 3HAC048232-001, gearbox type of RV-550N, reduction ratio of 252.33, and axis positions of Axis 2 / Axis 3. During operation, the REDUCTION GEAR RV550N-252.33 performs its assigned REDUCTION GEAR RV550N-252.33 function through the documented power, signal and communication interfaces.
BEFORE YOU BUY
Confirm the complete RV550N-252.33 reduction gear
ACTUAL APPLICATIONS
Application context for 3HAC048232-001
ABB documentation assigns 3HAC048232-001 the RV550N-252.33 reduction gear role within IRB 6700. The cases below describe three distinct production tasks supported by that documented hardware function.
-
01 - AUTOMOTIVE
Lift welding tooling through the main-arm axis
In a robotic welding cell, 3HAC048232-001 supplies the documented axis reduction as the arm raises and positions a welding gun. The 252.33 ratio converts servo motion into controlled joint torque through the production path. -
02 - AEROSPACE
Position large structures for drilling operations
During robotic drilling of a large assembly, 3HAC048232-001 supports main-arm positioning at the assigned joint. The RV-550N gearbox maintains the reduction relationship used to control tool approach and withdrawal. -
03 - GENERAL MANUFACTURING
Move high-payload fixtures between process stations
In a flexible handling cell, 3HAC048232-001 transmits joint torque while the IRB 6700 transfers a fixture between stations. The matched gearbox keeps the installed axis geometry and servo reduction consistent.
Technical specifications for 3HAC048232-001
-
Product Model3HAC048232-001
-
Product ParametersREDUCTION GEAR RV550N-252.33
-
In stock1 unit
-
ManufacturerABB
-
ManufacturerABB
-
Article Number3HAC048232-001
-
Component TypeReduction gear
-
Gearbox TypeRV-550N
-
Reduction Ratio252.33
-
Axis PositionsAxis 2 / Axis 3
-
Robot FamilyIRB 6700
-
ColorABB Orange
-
Replacement Product ID3HAC058399-003
-
Quantity Unit1 piece
View all additional
Alternative Names
3HAC048232 001
ABB abb spare part
ABB Robots abb spare part
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 3HAC048232-001 to the installed RV550N-252.33 reduction gear position
ABB 3HAC048232-001 RV550N-252.33 reduction gear serves the documented IRB 6700 configuration. Match the full article identity, robot or controller variant and assigned hardware position before integration.
Confirm the model-specific values recorded in the technical table, together with connector, mounting, color or protection execution where applicable. Record adjacent assemblies and controlled calibration data before removal.
After installation, restore the documented mechanical or electrical arrangement and complete the applicable ABB recommissioning checks. Verify the affected robot or controller function at a safe operating point and retain the result in the service record.
Features:
- Exact identity: 3HAC048232-001
- Product class: RV550N-252.33 reduction gear
- Family: IRB 6700
The ABB 3HAC048232-001 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 3HAC048232-001 identity before exchange
Replace 3HAC048232-001 only after matching the complete ABB article number and RV550N-252.33 reduction gear function. A related robot family or similar physical part does not establish interchangeability.
Before removal, isolate every applicable energy source and document the installed position, connectors, fasteners, calibration relationship and adjacent assemblies. Preserve the controlled configuration for recovery.
After replacement, restore every required setting or calibration datum, review diagnostics and test the affected motion or controller function. Record final acceptance before production use.
Features:
- Exact identity: 3HAC048232-001
- Product class: RV550N-252.33 reduction gear
- Family: IRB 6700
The ABB 3HAC048232-001 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 3HAC048232-001
- Product class: RV550N-252.33 reduction gear
- Exact ABB identity required before service
Documentation for ABB 3HAC048232-001 must match the RV550N-252.33 reduction gear and installed equipment; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size28 × 22 × 10 cm
-
Shipping weight0.80 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371091
-
OriginSweden
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 3HAC048232-001
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What drawings should engineering review before installing 3HAC048232-001?
Review the installed hardware list, cabinet drawing, connection diagram and controlled ABB Robots service documentation for 3HAC048232-001. -
How is interchangeability assessed for 3HAC048232-001?
Physical similarity is insufficient; 3HAC048232-001 must match the complete article identity, interface and approved system configuration. -
What diagnostics should maintenance review for 3HAC048232-001?
Review power, communication, gate, I/O or controller status relevant to 3HAC048232-001, then record resolved alarms. -
Which nameplate fields identify 3HAC048232-001 for a maintenance replacement?
Match the complete ABB article code 3HAC048232-001, its board or device designation, product family and installed position. -
Which connections must be recorded before removing 3HAC048232-001?
Photograph connector keying, terminal references, cable destinations, shields, earth points and neighboring assemblies used by 3HAC048232-001. -
Which configuration records should be backed up before replacing 3HAC048232-001?
Back up the hardware list, parameter set, controller project or converter configuration that identifies 3HAC048232-001. -
What records should remain with 3HAC048232-001 after service?
Keep receiving inspection, configuration backup, connection record, measured results and final acceptance with the 3HAC048232-001 service file. -
What receiving inspection is required for 3HAC048232-001?
Inspect the 3HAC048232-001 label, housing, terminals, connectors and packaging; record any damage or unreadable identification.
READY TO VERIFY YOUR PART?
Get a 3HAC048232-001 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
