PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- ABB
- ABB Robots
- 3HNA015717-001
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
3HNA015717-001 pressure control valve
ABB 3HNA015717-001 pressure control valve for ABB Robots equipment. It regulates the associated pneumatic flow or pressure path. In operation, it converts controller commands into the required process-air response for the connected robot equipment.
BEFORE YOU BUY
Confirm the complete pressure control valve
ACTUAL APPLICATIONS
Application context for 3HNA015717-001
Manufacturer documentation places the pressure control valve in practical generic applications. The three cases below describe different operating tasks in which 3HNA015717-001 performs its documented product-family role with the configured companion equipment.
-
01 · GENERAL MANUFACTURING
Verify conveyor routing with Pressure Control
At the control layer of the zone conveyors and merge points, 3HNA015717-001 supports the configured automation role as a pressure control valve. During route change, the system uses this function to coordinate destination data with equipment permissives, helping it move the item to the assigned process. -
02 · FOOD & BEVERAGE
Regulate aseptic filling with Pressure Control
During operation of the fillers and container conveyors, 3HNA015717-001 handles its designated signal or control duty as a pressure control valve. During line-speed ramp, the system uses this function to keep container flow synchronized with filling demand, helping it move accepted containers toward inspection. -
03 · WATER & WASTEWATER
Manage filtration backwash with Pressure Control
In the automation chain for the filter cells and backwash valves, 3HNA015717-001 performs its assigned control role as a pressure control valve. During filter loading, the system uses this function to sequence isolation, drain and rinse paths, helping it return the filter to production in a known state.
Technical specifications for 3HNA015717-001
-
Product Model3HNA015717-001
-
Product Parameterspressure control valve
-
In stock1 unit
-
ManufacturerABB
-
Exact Article Code3HNA015717-001
-
Product FamilyABB Robots
-
Component TypePressure Control Valve
-
Assembly ClassABB PCB assembly
-
System InterfaceABB Robots control interface
-
Control SupplyDocumented rack control supply
-
Connector InterfaceKeyed ABB board connectors
-
Installation FormatPlug-in control board
-
Signal DomainControl and diagnostic signals
-
Service PositionDocumented rack slot
-
Configuration BasisInstalled ABB hardware list
-
Replacement BasisExact article and board revision
-
Protective CheckESD and protective-earth control
-
Commissioning CheckPower-up diagnostics and function test
-
Maintenance Identity3HNA015717-001 controlled service identity
View all additional
Alternative Names
3HNA015717 001
ABB pressure control valve
ABB Robots pressure control valve
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 3HNA015717-001 to the installed ABB Robots
ABB 3HNA015717-001 is a pressure control valve for the ABB Robots. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare assembly class (ABB PCB assembly), system interface (ABB Robots control interface) and control supply (Documented rack control supply) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 3HNA015717-001
- Product class: pressure control valve
- Family: ABB Robots
The ABB 3HNA015717-001 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 3HNA015717-001 identity before exchange
Replace 3HNA015717-001 only after matching the complete article code, pressure control valve, installed ABB Robots role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 3HNA015717-001
- Product class: pressure control valve
- Family check: ABB Robots
The ABB 3HNA015717-001 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical data prepared for 3HNA015717-001
- Product family: ABB Robots
- Exact ABB identity required before service
Documentation for ABB 3HNA015717-001 must match the installed equipment and complete product identity; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size28 × 22 × 10 cm
-
Shipping weight0.50 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371091
-
OriginSweden
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 3HNA015717-001
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which ABB system documents apply to 3HNA015717-001?
Use ABB documentation for ABB Robots and confirm that the exact 3HNA015717-001 assembly is covered by the hardware scope. -
How should the signal or power interface for 3HNA015717-001 be verified?
Compare every connected circuit with the controlled drawing and verify the approved electrical class before connecting 3HNA015717-001. -
Which electrical checks apply before energising 3HNA015717-001?
Confirm the documented supply, interface, insulation condition and protective earth before energising 3HNA015717-001. -
What commissioning evidence is needed after fitting 3HNA015717-001?
Record power-up status, diagnostics, the affected function test and final maintenance approval for 3HNA015717-001. -
Which companion hardware must match 3HNA015717-001?
Verify the documented rack, control unit, power stage, connector assembly and adjacent hardware paired with 3HNA015717-001. -
What drawings should engineering review before installing 3HNA015717-001?
Review the installed hardware list, cabinet drawing, connection diagram and controlled ABB Robots service documentation for 3HNA015717-001. -
How is interchangeability assessed for 3HNA015717-001?
Physical similarity is insufficient; 3HNA015717-001 must match the complete article identity, interface and approved system configuration. -
What diagnostics should maintenance review for 3HNA015717-001?
Review power, communication, gate, I/O or controller status relevant to 3HNA015717-001, then record resolved alarms.
READY TO VERIFY YOUR PART?
Get a 3HNA015717-001 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
