PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
3N2632 Shaping Air Nozzle Assembly
ABB 3N2632 is a shaping-air nozzle assembly for the 50 mm BOC arrangement used with ROBOBEL926 applicators. Its hole-type outlet and FFKM seal specification distinguish this assembly from the non-BOC and FKM alternatives listed for the applicator family.
The assembly has a hollow annular body, a threaded outer mating interface and a stepped internal cavity. Small openings are distributed around the rim. These features support mechanical identification, while the matching bell, hub and probe configuration determines the required combination of service parts.
The assembly has a hollow annular body, a threaded outer mating interface and a stepped internal cavity. Small openings are distributed around the rim. These features support mechanical identification, while the matching bell, hub and probe configuration determines the required combination of service parts.
BEFORE YOU BUY
Confirm the complete Shaping Air Nozzle Assembly
ACTUAL APPLICATIONS
Relevant contexts for 3N2632
These field groups describe ABB robotics portfolio categories, not verified installation records for this individual 3N2632 article.
-
01 · AUTOMOTIVE
Automotive, Mobility and Road Transportation
Automotive, Mobility and Commercial Road TransportAutomotive, Road Transport and Passenger Mobility -
02 · PLASTICS
Plastics, Rubber and Flexible Packaging
Plastics and Rubber, Printing and PackagingPolymer Films, Laminates and Flexible Packaging -
03 · METALS
Ferrous Metals, Nonferrous Metals and Metallurgy
Ferrous Metals, Steel and General MetallurgyNonferrous Metals, Aluminium and Copper Metallurgy
Technical specifications for 3N2632
-
Product Model3N2632
-
Product ParametersShaping Air Nozzle Assembly
-
In stock7 units
-
ManufacturerABB
-
Air outlet typeHole type
-
Cleaning configurationBOC
-
Seal materialFFKM
View all additional
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match the nozzle assembly to its mating assembly
3N2632 is presented as a mechanical component, not as an energized module. The original photographs identify a hollow annular body with a machined surface and circumferential connection features.
The annular opening, stepped cavity, outer thread and rim openings should be compared with the required mating assembly. These features describe physical form without establishing dimensional tolerances or process performance.
The parts list identifies aluminium-alloy components, FFKM seals and stainless-steel screws. Allowable rotational speed and process compatibility are not established here. Integration requires the original assembly instructions and mechanical acceptance criteria, not electrical-module ratings.
Features:
- Hollow circular mechanical body
- Threaded outer mating interface
- Annular rim and internal stepped geometry
No safe rotational speed, balancing procedure or process rating is established by this physical reference. Follow the applicable original assembly documentation.
INTERCHANGEABILITY
Verify 3N2632 before replacement
Match the 3N2632 reference and supplied mechanical geometry. Do not substitute another nozzle assembly solely because its external appearance or general description looks similar.
Compare thread form, internal cavity, rim openings and seating geometry using the applicable drawing or measured part. A photograph cannot establish fit tolerances, wear limits or acceptable damage.
Confirm the scope and condition of the actual supplied component before installation. Replacement acceptance requires the original assembly requirements; this page does not establish process suitability or a safe operating speed.
Features:
- Exact mechanical part reference
- Thread and seating-geometry comparison
- Original assembly acceptance requirements
Do not infer speed, balance or material compatibility from appearance. Verify the exact nozzle assembly and original assembly requirements before use.
ABB 3N2632 Shaping Air Nozzle Assembly Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Features:
- Exact-model data for 3N2632
- Matching original manufacturer manual not available for this reference
- ABB Robots and ABB product directories
Documentation for 3N2632 must match the complete installed product identity, the documented 3N2632 configuration and the supplied shaping-air nozzle assembly before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Reference size8 × 8 × 4 cm
-
Reference weight0.28 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceConfirm with quotation
-
OriginSweden
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 3N2632
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Is 3N2632 an electrical control module?
No. ABB identifies 3N2632 as a mechanical shaping-air nozzle assembly. A control-module supply voltage or electronic interface must not be assigned to this part. -
Which mating features matter when comparing this nozzle assembly?
Compare the external thread, stepped internal cavity, annular opening and rim-hole arrangement. The part reference alone should not replace a mechanical fit check. -
Can a non-BOC shaping-air ring replace 3N2632?
Do not infer interchangeability. Match the BOC arrangement, FFKM sealing and associated bell configuration; non-BOC assemblies have different references. -
Which materials are specified for the 3N2632 assembly components?
The parts list identifies aluminium-alloy nozzle, body, spacer and ring components, FFKM O-rings and stainless-steel screws. It does not specify a detailed alloy grade here. -
Are the small rim holes sufficient to identify process compatibility?
No. They are visible structural features, not proof of suitability for a particular fluid, coating composition, flow rate or process condition. -
How should a distributor describe the supplied item?
Quote 3N2632 as the shaping-air nozzle assembly. A complete applicator, bell cup, hub or probe is not implied by the assembly reference. -
Must thread dimensions be measured before replacement?
Yes, the mating geometry must match the required assembly. No thread diameter, pitch or tolerance has been verified from these photographs. -
Why is there no manufacturer PDF for this reference?
The Data Sheet is an assembly and service-part reference, not an installation procedure. Use the applicable original applicator instructions before maintenance.
READY TO VERIFY YOUR PART?
Get a 3N2632 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
