ALL MANUFACTURERS

Kinetix 300 Servo Drive

120 Volts Doubler Mode:Yes
Continuous Output Current (0-peak):5.7 Amperes
Integrated AC (EMC) Line Filter:No
Input Voltage:120/240 Volts (AC), 1 Phase
Power Rating:800 W
Part Number/Catalog No.:2097-V31PR2-LM
Safe Torque-Off:Yes

ARMOR WELDBLOCK

ARMOR WELDBLOCK
16 POINT CONFIGURABLE
QUICKCONNECT
5-PIN AUXILIARY POWER CONNECTOR
SCREW MOUNTED

DeviceNet Scanner Module

Module Width:Single Slot
Compatible controllers:SLC 5/02 or later
Pass through:Supported
Communication Port:One (1) DeviceNet
Data Transfer speed:125Kbps
Storage Temperature:-40 to 85 C (-40 to 185 F)
Vibration:Tested 5 g @ 10-500Hz per IEC 68-2-6
Operating Shock:30 g peak acceleration, 11(+1)ms pulse width
Series:SLC 500
Module Type:DeviceNet Scanner Module
Scan I/O:Yes
Backplane Current (5 Volts):500 milliamps

Process Module

PROCESS MODULE
XM-360
6-CHANNEL INPUT
0-10 VDC/0-20 MA INPUT RANGE
4-20 MA OUTPUT
600 OHM MAX LOAD
STATUS INDICATORS
RS-02232 VIA MINI-CONNECTOR
COMM RATE FIXED @ 19.2 KBPS
STANDARD DEVICENET NETWORK

POINT I/O Analog Input Module

Series:POINT I/O
Module Type:Analog Input Module
Inputs:2 single-ended, non-isolated, voltage
Signal Type:Voltage
Conversion Type:Delta Sigma
Absolute Accuracy:0.1% Full Scale @ 25 °C (77 °F)
Data format:Signed Integer
Key Switch Position:3
Enclosure Type Rating:Open

DC-powered sink output module

Module Type:Digital DC Output Module
Number of Outputs:32 (4 sets of 8) Outputs
Voltage Category:10-32 Volts DC, Sink
DC Operating Voltage:10-30 Volts
Backplane Current:330 Miliamperes
Max Continuous Current Per Output:0.5 Amperes
Max Continuous Current Per Module:8 Amperes
Wiring Arm:1771-WH
Coating:Conformal Coat
Typical AC Signal Delay (Off):45 (+/- 15) ms

Stratix 5700 managed Ethernet switch

Part Number:1783-BMS06SL
Product type:Managed Ethernet switch
Ports:6
Copper ports:4
Fiber ports:2
Input voltage:12 to 48 Volts DC
Operating temperature:-40 to 60 degrees Celsius

DeviceNet Master Module

Series:PACSystem RX3i
Product Description:DeviceNet Master Module
Part Number:IC694DNM200
Communication protocol:DeviceNet
Maximum Number of Slave Devices Supported:63
No. of supported DeviceNet slave:63
Slave Operation:Supported
Input data:255 Bytes
Communication Rates:125k, 250k, or 500k bauds
Output data:255 Bytes

ArmorBlock MaXum I/O Cable

ArmorBlock 
MaXum I/O Cable 
Base with 18 mm 
round media connectors 
and jumpered DeviceNet power

4-Ch Universal Analog Inputs

Input Types:4 V, C, or 3 TC, or 2 RTD, Resistance
Resolution:18 bits
Input Overvoltage Protection:+24 VDC continuous
Input Overcurrent Protection:32 mA continuous
Backplane Current Required:15 mA at 5 V maximum  20 mA at 24 V maximum
Common Mode Rejection:<96 dB at 50/60 Hz
Normal Mode Rejection:65 dB to 74 dB at 50/60 Hz
Thermal Dissipation:1.00 Watt, maximum