ALL MANUFACTURERS

Controller with Expanded Memory

Processor:32-bit ARM
Base Memory:512MB DDR4 RAM
Expanded Memory:2GB Flash
Execution Speed:0.05ms/1k instructions
I/O Scan Time:≤1ms (for 1000 I/O points)
Task Capacity:32 concurrent tasks
Digital I/O:Up to 2048 points
Analog I/O:Up to 512 channels
Input Voltage:24V DC (±15%) or 100-240V AC
Power Consumption:15W (typical)

Scanner head

Scanner head,
IR sensor.
3/4in threade
Power Supply: 24V DC (±10%)
Power Consumption: 50W (typical)
Wavelength Range: 900-1100nm
Spot Diameter: 0.2-3.0mm (adjustable)
Focal Length: 150-450mm (motorized adjustment)
Scanning Angle: ±30° (optical)
Positioning Accuracy: ±0.01°

COMMUNICATION BOARD

PROFIBUS DP:9-pin D-sub, 12Mbps max
Modbus RTU:RS485 (terminal block)
Power Supply:24V DC (±10%), sourced from drive
Power Consumption:3W (typical)
Isolation :1.5kV AC (fieldbus to drive)
Signal Levels :RS485: ±15V differential

35 AA 92 Analog Output Module

Operating Voltage:24V DC (±10%)
Power Consumption:2.5W (typical)
Number of Channels:4 
Output Type:0-20mA
Resolution:16-bit 
Load Impedance:≤600Ω
Isolation:1.5kV AC 

35 ZE 94 CPU Processor Board

Input Voltage:24V DC (±15%)
Power Consumption:25W (typical)
Processor:32-bit PowerPC @ 1.2GHz 
Memory:1GB DDR4 RAM
Flash Storage:8GB eMMC
Execution Speed:0.02ms/1k instructions
I/O Capacity:Supports up to 16,384 I/O points
Task Handling:64 concurrent tasks
Scan Cycle:Configurable 1-100ms

CONTROL CIRCUIT BOARD

Voltage: 24V DC (±10%)
Isolation: 1.5kV AC 
Digital Inputs:24V DC
Relay Outputs:5A
Analog Inputs:0-10V/4-20mA

CIRCUIT BOARD

Input Voltage:24V DC (±10%)
Power Consumption:8W (typical)
Isolation Voltage:4kV AC 
Gate Drive Output:±15V (IGBT control)
Switching Frequency:Up to 2kHz
Supported IGBTs:1700V/3300V modules
Desat Protection:<2μs response time
Short-Circuit Protection:≤10μs trip time

Display Unit

Power Supply:24V DC
Power Consumption:5W max
Isolation:1.5kV AC
Screen Type:TFT LCD with LED backlight
Resolution:320 × 240 pixels (QVGA)
Color Depth:65k colors

I/O Interface Card

Power Supply:24V DC (±10%)
Surge Protection 4kV 
Input Channels:24V DC
Isolation:1.5kV channel-to-channel
Output Channels:4-20mA
Update Rate:10ms per channel
Backplane Interface:800xA CI867 bus
Protocol Support:Modbus RTU/TCP

Governor drive board

Supply Voltage: 24VDC ±10%
Power Consumption: 15W typical
Isolation: 1500VAC I/O to logic
Speed Range:0-12,000 RPM
Resolution:0.01% of rated speed
Analog Inputs:16-bit, ±10V, 4-20mA
Analog Outputs: 12-bit, ±10V
Digital I/O: 16x opto-isolated (24VDC)
Servo Outputs: 4x (PWM, ±50mA)