









DNBT Dual Nodebus Module
Series: Foxboro I/A Series
Power Supply: Typically 24V DC
Operating Temperature: 0°C and 60°C
Storage Temperature: -20°C and 70°C
Humidity: 5% and 95% (non-condensing)
Industrial Drive Inverter
Input Voltage: 200V-240V AC
Input Frequency: Typically 50/60 Hz
Output Frequency: 0 to 400 Hz
Storage Temperature: -20°C to 60°C
Operating Temperature: Typically between -10°C to 50°C
Humidity: 5% to 95% non-condensing
NODE BUS INTERFACE MODULE
Highly Intuitive Design Environment
Graphical Configuration
Live Updating Loop Drawings
One-Spot Engineering Environment
Common Database Integrating System,
Control, Display and Field Device
Configuration in One Tool
PLC MODULE
Power Supply: Typically 24V DC
Operating Temperature: Usually from 0°C to 55°
Current Consumption: Typically around 100 mA
Input Voltage: 24V DC
Input Type: Dry contact
Number of Inputs: Typically up to 16 or 32 input points
Output Voltage: 24V DC
DC Power Supply
AC Input Voltage Range: 90-132V or 180-264V
Nominal Output DC Voltage: 24 VDC
Operating Temperature:
Typically 0°C to 50°C (32°F to 122°F)
Typically -20°C to 70°C (-4°F to 158°F)
Modbus Gateways
Gateways Modbus
TCP/IP Master to
Modbus RTU Slave
Data Rate:115.2 kb/s
Number of Ports:2 x RJ45
Interface Type:Ethernet
Supply Voltage - Min:24 V
Supply Voltage - Max:24 V
Packaging:Each
Brand:HMS Networks
Dimensions:114 mm x 44 mm x 127 mm
IP Rating:IP20
Operating Supply Current:200 mA
Product Type:Gateways
1FK7 Synchronous Motors
SIMOTICS S Synchronous servo motor
1FK7 Compact 0.85Nm, 100K
6000rpm 0.38kW
Naturally cooled Power/signal connectors
Connector can be rotated by
270° FRAME SIZE IMB 5 (IM V1, IM V3)
FLANGE 1 Absolute encoder
20BIT +12-bit multi-turn with
Drive-CLiQ interface (encoder AM20DQ)
Derating 10% due to absolute encoder PLAIN SHAFT
TOLERANCE N
W/O HOLDING BRAKE DEGREE
OF PROTECTION IP64
1FK7 Synchronous Motors
SIMOTICS S Synchronous servo motor
1FK7 Compact 0.85Nm, 100K
6000rpm 0.38kW
Naturally cooled Power/signal connectors
Connector can be rotated by
270° FRAME SIZE IMB 5 (IM V1, IM V3)
FLANGE 1 Absolute encoder
20BIT +12-bit multi-turn with
Drive-CLiQ interface (encoder AM20DQ)
Derating 10% due to absolute encoder PLAIN SHAFT
TOLERANCE N
W/O HOLDING BRAKE DEGREE
OF PROTECTION IP64
1FK7 Synchronous Motors
SIMOTICS S Synchronous servo motor
1FK7 Compact 0.85Nm
100K, 6000rpm 0.38kW
Naturally cooled Power/signal connectors
Connector can be rotated
by 270° FRAME SIZE IMB 5 (IM V1, IM V3)
FLANGE 1 Absolute encoder
20BIT +12-bit multi-turn with
Drive-CLiQ interface (encoder AM20DQ)
Derating 10% due to absolute encoder
PLAIN SHAFT, TOLERANCE N
W/O HOLDING BRAKE DEGREE
OF PROTECTION IP65 AS FLANGE IP67
PAINT FINISH RAL7016
1FK7 Synchronous Motors
SIMOTICS S Synchronous servo motor
1FK7 Compact 0.85Nm
100K, 6000rpm 0.38kW
Naturally cooled Power/signal connectors
Connector can be rotated
by 270° FRAME SIZE IMB 5 (IM V1, IM V3)
FLANGE 1 Absolute encoder
20BIT +12-bit multi-turn with
Drive-CLiQ interface (encoder AM20DQ)
Derating 10% due to absolute encoder
PLAIN SHAFT, TOLERANCE N
WITH HOLDING BRAKE
DEGREE OF PROTECTION IP64

Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.