ALL MANUFACTURERS

Discrete Input module

Series:Series 90-70
Part Number:IC697ALG321
No. of Inputs:4 Inputs
Conversion Rate:2 ms
Input Impedance:250 Ohms
Weight (approx.):4 Pounds

OUTPUT MODULE

Series:Series 90-70
Manufacturer:GE Fanuc (Formerly); Emerson Automation (Current)
Product Description:Analog output module
Part Number:IC697ALG320
No of Channels:Four (4) output channels
Current Output Range:0 to 22.2 milliamps
Conversion rate:2.0 ms
Max, no. of Output channels:252 channels
Calibration:Factory set at 10 Volts +/- 2 mV
Product Lifecycle:Discontinued / Obsolete
Module width:1-slot
Weight:0.84 kilograms
Product Lifecycle Status:Discontinued

Output module

Series:PACSystem RX3i
Manufacturer:GE Fanuc
Part Number:IC694MDL740
Product Description:Discrete output module
No of Channels:Sixteen (16)
No. of output groups:Two (2)
Rated voltage:12/24 V DC
No. of channels per group:Eight (8)
No. of output groups:Two (2)
Wiring configuration:Positive Logic
Isolation:250 V AC continuous;
Nominal output voltage:12 / 24 VDC
LEDs:Yes
Output current per channel:0.5 mA
Otput Voltage Drop:0.5 Volts maximum
Output current per module:2:00 AM
Maximum inrush current:4.78 A For 10 ms
Current draw:110 mA (all outputs active)
On response time, maximum:2 ms
Off response time, maximum:2 ms
Output Voltage Drop:1.0 volt, maximum
Product Lifecycle Status:Active

Output Module

Series:Series 90-30
Part Number:IC693MDL753
Product Description:Discrete output module
Product type:Digital I/O
No of Channels:Thirty-Two (32)
No. of output groups:Four (4)
Compatibility:GE Fanuc 90-30 PLCs
No. of groups:Four (4)
Channels per group:Eight (8)
Output points:32
Nominal output voltage:12-24 VDC
Module voltage input:5 Volts DC
Nominal Input voltage:12 / 24 VDC
Off response time, maximum:0.5 ms
LED current draw:4.7 milliamps
Inrush current:5.4 Amps
Current draw:260 mA
Off-state Leakage:1 mA maximum
On response time, maximum:0.5 ms
Off response time, maximums:2 ms

Input Module

Series:Series 90-30
Manufacturer:GE Fanuc
Part Number:IC693MDL646
Rated Voltage:24 Volts DC
No of Channels:Sixteen (16)
Input signal range:0-30 VDC
On-state Voltage:11.5 to 30 Volts DC
Off-state Voltage:0 to +5 Volts DC
Off state voltage:0-5 VDC
On-state Current:3.2 mA minimum
Off-state Current:1.1 mA maximum
On response time, typical:1 ms
Off response time, maximum:1 ms
Nominal Input voltage:24 VDC

AC Output Module

Series:Series 90-30
Part Number:IC693MDL330
Product Type:Output Module
Rated Voltage:120 to 240 V AC
Outputs:8
Output Current Per Point:2 A

Single-Slot CPU Module

Series:Series 90-30
Part Number:IC693CPU364
Serial port:RS-485 (via power supply
User memory:240K Bytes
Product type:CPU module
Compatibility:GE Fanuc 90-30 PLCs
Microprocessor:80386EX
Processor speed:25 Megahertz
Register memory:240 kilobytes
Number of Ethernet ports:One (1)

Profibus interface module

Series:Series 90-30
Part Number:IC693CBL305
Cable Length:1 Foot
Cable type:Wye Cable
Wire Shield:Yes
Average Weight:2.0 Pounds
Cable Housing:Yes
Conducting Material:28 AWG Size Wire

I/O BUS EXPANSION CABLES

Brand:GE Fanuc
Series:Series 90-30
Part Number:IC693CBL300
Type:Cable
Purpose:Bus expansion
Structure:Continuous shield
Length:1 meter
Compatibility:CPUs, remote racks
Feature:Wye adapter
Catalog:Accessories

Profibus interface module

Series:Series 90-30
Manufacturer:GE Fanuc
Part Number:IC693ACC310
Voltage Rating:120 VAC
Item Name:Filler Module
No. of module installations:As needed
Amperage Rating:0.5 A
Product Type:Filler module
Product Description:Slot cover
Ethernet:Supported
Slot width:Single slot
Supported Component:PLC
Rack location:Any slot