
Block I/O module IC660BBD120
Series:Genius I-O
Series:Series 90-70
Part Number:IC660BBD120
Product Description:High Speed Counter Block I/O module
Product Type:High-Speed Counter Block
Number of Supported Counters:1, 2, or 4
Input voltage range:5VDC-30 VDC
No. of discrete inputs:Twelve (12)
Number of Inputs:12
Input response time:0.5ms (plus selectable filter delays)
Input signal voltage:5V DC to 30V DC
Number of Outputs:4
Number of Oscillator Outputs:1
Input frequency:200 kHz
Number of DC Outputs:1 5 Volts DC Rated Output
Output voltage:4.75V DC to 5.25V DC
Output current:0.5 A
Humidity:5-95% non-condensing
Oscillator output:3.8 V @ 4.0 mA
I/O MODULE
Series:Genius Block I/O
Part Number:IC660BBD110
Module type:Discrete input block I/O
Input Voltage Range:93-132 VAC
Nominal Input voltage:115VAC
Number of points:Sixteen (16)
Input diagnostics:Open Wire, Short Circuit
Input to ground or serial bus Isolation:1500V
Product Type:Discrete Input Block
Number of Inputs:16
Number of Outputs:None
Voltage Type:AC
I/O MODULE
Series:Genius I/O
Part Number:IC660BBD101
Product Description:Source Block I/O
Product Type:Discrete I/O Block
No. of I/O:8
Number of Circuits:8
Fuse Protection:Supported
Nominal voltage:115 VAC
Voltage Type:AC
Operating Voltage:93-132 VAC
Frequency:47 to 63 Hertz
Output response time:Zero crossing
Filter time:10 to 100mS
I/O MODULE
Brand:GE Fanuc
Series:Genius I-O
Part Number:IC660BBD100
Description:Circuit I/O Block
Circuits:8
Voltage:115 Volts AC
Isolation Voltage:1500 Volts
Inputs:16
Dissipation:28 watts
Frequency:50/60 Hertz
I/O MODULE
Brand:GE Fanuc
Series:Genius I-O
Part Number:IC660BBD023
Description:Sink I/O block
Voltage:24 Volts DC
Circuits:16
Load current rating:2 Amperes
Selectable Input filter time:10-100 ms
Temperature:0-60 degrees Celsius
I/O MODULE
Series:Genius I-O
Part Number:IC660BBD021
Description:Serial I/O block
Product Description:16 Circuit Block sink I/O Module
No. of circuits:16 I/O circuits
Input signal voltage:24 / 48 VDC
Input processing time:1.7 ms
Isolation voltage:1500 Volts
Output Current:2 Amperes per circuit
Power supply drop out time:10 milliseconds
maximum inrush current:10 Amperes up to 10 ms
Temperature:0-60 degrees Celsius
Humidity:5-95% non-condensing
Product lifecycle:discontinued
I/O MODULE
Series:Genius I-O
Part Number:IC660BBA106
Heat Dissipation:12 Watts
Channel to channel isolation:1500V RMS
Product Description:Current source input block
No. of Inputs:Six (6)
Supported signals:0-20 mA; 4-20 mA
Input Resolution:1 µA
Status LEDs:Unit OK, I/O Enabled
Description:Analog input block
Channels:6
Current:4-20 mA
Voltage:115 Volts AC, 125 Volts DC
Thermal drift:70 ppm
Input impedance:100 ohms
Analog output module
Series:Genius I/O
Part Number:IC660BBA105
Description:I/O block
Product Description:Analog output module
Terminal:32
No. of Outputs:Six (6) analog outputs
Output block:6
Points per common:One group of 6
Resolution:6µA
Output Signals:4-20 mA
Output range:4-20 mA /0-24 mA
Heat Dissipation:12 Watts
Update Rate:25 ms
Block to Block Isolation:1500V for one minute
LEDs (I/O Block):Unit OK, I/O Enabled
I/O MODULE
Series:Rx7i PACsystem
Part Number:IC660BBA104
No. of Inputs:Six (6)
Input signal:4-20 mA
Input signal Resolution:1 µA
Output resolution:6 µA
Block Power, nominal:115 VAC / 125 VDC
Product Description:Current Source I/O Block
Input Resolution:1 microamp
No. of Outputs:2
Output Resolution:6 microamps
Block Power:115 VAC/ 125 VDC
Heat Dissipation:12 Watts
Status LEDs:Unit OK, I/O Enabled
Block to Block Isolation:1500 Volts
I/O MODULE
Series:Genius I-O
Part Number:IC660BBA103
Weight:4 Pounds
No. of Inputs:Six (6)
Resistance Input:25.0mV to +150mV
Block Power:115VAC / 125VDC
Status LEDs:Unit OK, I/O Enabled
Heat Dissipation:9 Watts
Block to Block Isolation:1500 Volts
Group to Group Isolation:300 Volts
Voltage measurements:-25 mV to 150 mV
Accuracy:8 Hertz
I/O MODULE
Series:Genius I-O
Part Number:IC660BBA101
Weight:4 Pounds
No. of Inputs:Six (6)
Resistance Input:0 to 5000 Ohms
No. of Inputs:6
Input Resolution:0.1 degrees Celsius
Block Power:115 VAC / 125 VDC
Heat Dissipation:7 Watts
Block to Block Isolation:1500 Volts
Group to Group Isolation:300 Volts
Status LEDs:Unit OK, I/O Enabled
Analog Block
Series:Genius I-O
Part Number:IC660BBA100
Product Description:Analog I/O Block
No. of Inputs:4
No. of Outputs:2
I/O Resolution:12 bit + sign
Block Power:115 VAC
Heat Dissipation:6 Watts
Absolute Accuracy:+/- 0.2% of the full scale
Status LEDs:Unit OK, I/O Enabled
Analog input module
Series:Genius I/O
Part Number:IC660BBA026
Product Description:Analog input module
No. of inputs:Six (6) analog inputs
Points per common:One group of 6
Output Signals:4-20 mA
Input Resolution:1 microamp
Heat Dissipation:12 Watts
Resolution:1µA
Status LEDs:Unit OK, I/O Enabled
Block to Block Isolation:1500 Volts
Accuracy:0.1% of full-scale reading
Analog output module
Series:Genius I/O
Part Number:IC660BBA025
Points per common:One group of 6
Output Signals:4-20 mA
Output Resolution:6 microamps
Supply voltage range:18-56 VDC
Output Update frequency:25 ms
Block Power:24/48V DC
Resolution:6µA
Heat Dissipation:12 Watts
Update Rate:25 ms
Status LEDs:Unit OK, I/O Enabled
I/O MODULE
Series:Genius I-O
Part Number:IC660BBA024
No. of Inputs:4
Input Accuracy:0.1% of full-scale reading
Input Resolution:1 microamp
No. of Outputs:2
Output Accuracy:0.15% of full-scale reading
Output Resolution:6 microamps
Block Power:24/48 VDC
Heat Dissipation:12 Watts
THERMOCOUPLE INPUT MODULE
Brand:GE Fanuc
Series:Genius I-O
Part Number:IC660BBA023
No. of Inputs:6
Block Power:24/48 Volts DC
Heat Dissipation:9 Watts
Block to Block Isolation:1500 Volts
Group to Group Isolation:300 Volts
Accuracy:8 Hertz
Status LEDs:Unit OK, I/O Enable
GE Fanuc I/O Block
Series:Genius I-O
Manufacturer:Emerson Automation / GE Fanuc (formerly)
Part Number:IC660BBA020
Product Description:Combination I/O module
No. of Inputs:Four (4) analog inputs
No. of Outputs:Two (2) analog outputs
I/O Resolution:12 bits + sign
I/O Update Frequency:Once every 4 ms
Supply voltage range:18-56 VDC
Block Power:24/48 Volts DC
Heat Dissipation:6 Watts
Resolution:12-bit + sign
Status LEDs:Unit OK, I/O Enabled
Block to Block Isolation:1500 Volts
Output Module
Manufacturer:GE Fanuc Emerson
Series:Versamax
Part Number:IC655MDL580
Product:Output Module
Output Points:16 Outputs
LED Indicators:1 per Output
Output Type:Relay
Key Position:A3 and B1
Typical Supply Current:152 mA
Maximum Supply Current:180 mA
Relay Output Module
IC630MDL380
DISCONTINUED BY MANUFACTURER
RELAY OUTPUT MODULE
16 CIRCUITS
MDL380 SERIES
NORMALLY OPEN
5-265 VAC/VDC MAXIMUM
4 AMPS CONTINUOUS
Output Module
Manufacturer:GE Fanuc Emerson
Series:Series Three
Part Number:IC630MDL376
Product Type:Output Module
Output Type:Isolated Outputs
Number of Outputs:8 Outputs
Voltage Type:AC
Voltage Rating:115/230V AC
Approximate Weight:1.1 lbs
LED Indicators:Included
Input Module
Series:Series 90-30
Part Number:IC630MDL325
Module Type:Input Module
Voltage Rating:115V AC/DC
Operating Frequency:48 to 63 Hz
Number of Input Points:16
Number of Groups:2 Input Groups
Indicators:LED Indicators
On-Stage Delay for AC Voltage:10 to 40 ms
On-Stage Delay for DC Voltage:6 to 30 ms
Operating Temperatures:0 to 60°C
Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.