ALL MANUFACTURERS

Power Distribution Cable

The red wire represents the +24Vdc
The black wire represents the 0Vdc
Approvals: UL, CSA; FM pending
Housing type: 2 pole socket block 
Weidmuller BLZ 5.08/2F
Crimp pin type: Weidmuller 
DFFC 1.5-2.5 SN E

POWER DISTR.CABLE PDB-CPX05 5VDC WD

POWER DISTRIBUTION CABLE SET CPCHAS

Power distribution cable
set Control Processor
24 V DC

ART PWR DISTR.CABLE IOCHAS-0002 5VDC WD

Approvals: UL, CSA pending
Length: 2 m
Type: 3 pole socket connector
Make: Weidmuller: BLZ 5.08/03/180F SN BK

Multi-Conductor Cable

POWER BUSBAR 
MAX.200A 24/48/110VDC, 60CM
Multi-Conductor Cable
Optical Rail Module 
Communication Module

Power Rail

POWER BUSBAR MAX.200A 24/48/110VDC,150CM
Nominal Voltage:24 Vdc, 48 Vdc, 110 Vdc
Max Current:200 A continuous 
Length:1,500 mm (150 cm)
Bus Sections 10 sections  152.4 mm each
Approvals:UL, CSA, FM‑pending

I/O BUS+FERRITE CPCHAS TO MAX. 4X IOCHAS

I/O BUS+FERRITE CPCHAS TO MAX. 3X IOCHAS

A.R.T. CHASSIS FOR CONTROL PROCESSOR

Power Supply Inputs:Dual 5V DC (5V-1 and 5V-2)
Power Consumption:0.05 A per 5V input rail
Chassis Width:482.6 mm (19 inches)
Operating Temperature:0°C to +50°C
Storage Temperature:-40°C to +70°C
Relative Humidity:5% to 95% non-condensing

COMMUNICATION CABLE

Approval: UL, CSA, FM
Type: BELDEN 8105 5x2 CORE SHIELD
Length: 2 m
Control Processor side: (USI-0002) 10-pins
DCOM-232/485 side: 16-pins

SET ETHERNET CABLES INTERNAL, SFTP,1Y/1G

Type: Shielded, twisted-pair cable
Number of conductors: 4
Wire gauge: 22 AWG
Insulation: PVC
Jacket: PVC
Flame retardant: Yes
Plenum-rated: Yes
Length: Varies depending on supplier

Dummy Communication Module

Function:Placeholder for unused COM slots
Compatible Systems:Honeywell FSC
Matches system range: –25 °C to +70 °C typical

DUMMY COM MODULE FOR NOT-USED SLOTS

COVERPLATE FOR 19 INCH CHASSIS 4HE

RITTAL TS8808211 FDL/RDL/PL/SW RAL7035

A.R.T. FUSED PWR DISTR. BOARD 5VDC WD

Safety Manager A.R.T Module
FUSED PWR DISTR BOARD
5 VDC ±5 %
24 VDC ±20 %

I/O Chassis

Form Factor: 19-inch standard rack width
Slot Capacity: 21 slots for I/O module
Voltage: 24 V DC (±10%) 
Humidity: 5–95% RH (non-condensing).
Vibration: 5–500 Hz, 2 g RMS (IEC 60068-2-6).
Shock: 30 g peak, 11 ms

SAFE NAMUR SENSOR CONVERTER 16CH CC

MOB1 MOUNTING CHASSIS FTA, TERMINALS

24VDC FAN UNIT WITH READBACK CC

Power Rating:1 HP
Motor Type:Induction Motor
Speed Control:Variable Speed
Airflow Capacity:2000 CFM @ 0.5 PSI
Duct Compatibility:Standard 12″ Diameter
Noise Level:72 dB(A)
Inlet Diameter:12″
Voltage:230V, 60Hz