
MASTERDRIVES STANDARD MODULE
SIMOVERT Master drives
Normalizing module
ABO For devices
3 AC 380-460V and
510-620V DC, 146A
Level Control Transmitter
Measurement Principle: Guided Wave Radar
Measurement Range: Up to 30 meters (98.4 feet)
Accuracy: ±3 mm (±0.12 inches)
Resolution: 1 mm (0.04 inches)
Process Temperature Range: -196°C to 450°C (-320°F to 842°F)
Process Pressure Range: Up to 100 bar
Power Supply: 12-28 VDC
Current Consumption: Typically 20 mA
Case ExpansionTransducer Systems
Input Power:+24 Vdc, 30 mA minimum
Input Power:+13.5 to +26 Vdcunregulated
30 mAminimum
Voltage:+1 to +6 Vdc, all models
Output Noise:<10 mV
135613-01 and -11 0.20 V/mm (5.0 V/in)
3300 XL 11 mm Extension Cable
3300 XL 11 mm Extension Cable
080 8.0 meters (26.2 feet)
11 Armored FluidLoc cable
05 Multiple Approvals
VOLTAGE DIVIDER MODULE
VOLTAGE DIVIDER MODULE
VDU
PRODUCT MIGRATION LV SINAMICS
Input Voltage Range:Up to 1000 V DC
Output Signal:±10 V
Power Supply: 24 V DC
Accuracy:±1% of input voltage
Emergency Shutdown Device
Ethernet-6 Ports:10/100 Mbps
Protocol :TCP/IP
Input Range:18-36 Vdc Voltage
Power Consumption:24 W Typical/35 W Maximum
Closed StateImpedance:57 KΩ Maximum
Open StateImpedance:187 KΩ Minimum
Internal WettingVoltage:10-15 Vdc
Input Resistance:150 KΩ Typical
Faulted InputTolerance:±40 V
Operating Panel
Display:2-line LCD with backlight
Control Keys:Navigation keys + Start/Stop/Jog buttons
Operating Voltage:24V DC
Power Consumption:≤ 5 W
Binary Input Module
Input Channels:16x
Input Voltage:24/48/110/125V DC
Input Threshold (ON);>60% of rated voltage
Input Current :3–8 mA
Response Time:<5 ms
Isolation:2.5 kV AC
Power Consumption:≤ 4 W
Relay Control module
Number of Channels: 8 independent channels
Number: 6 dedicated
Contact Rating: 24 V DC / 30 mA
Voltage: +24 V DC nominal
Power Consumption: < 5 W
PROFINET Controller Gateway Module
Series: Mark VIe
Function: PROFINET Controller Gateway Module
Size: 13.0 x W: 4.0 (in)
Voltage 24 VDC
Operating Temperature: 22 to 149°F
Processor Type: 1066 MHz EP80579 Intel
OS: QNX Neutrino
Memory: 256 DDR2 SDRAM
GCOM Communication Interface
Power Consumption: 1.5 - 2.5 W
Isolation:500 V AC (ports to backplane)
ESD Protection:±15 kV (IEC 61000-4-2)
Industrial Control Module
Input Channels:16 (Grouped as 8+8)
Input Voltage:24 V DC (Nominal)
Voltage Range:19–30 V DC (Logic "1": ≥15 V)
Logic "0" Threshold:≤5 V DC
Input Current:6 mA per channel (typical)
Isolation:500 V AC (channel-to-channel)
Backplane Power :5 V DC (via P4 baseplate)
Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.