ALL MANUFACTURERS

Aero GT Vibration I/O Module

Supply Voltage: 24V DC (±10%)
Power Consumption: <15W (typical)
Input Channels:2 independent channels
Signal Range:±10V (IEPE), 4–20mA (Velocity)
Sampling Rate:Up to 100 kHz per channel
Frequency Response:0.5 Hz – 20 kHz (±3dB)
Dynamic Range:100 dB (typical)
ADC Resolution:24-bit
Analog Output:4–20mA

SC Switch Module

Safety Standard Compliance 
IEC 61508 SIL3, ISO 13849-1
and other industrial safety standards
Communication Protocols
Modbus TCP, Profibus, EtherCAT, 
CANopen, and other protocols
Operating Voltage 24 VDC 
Power Consumption Typically <20 W
Operating Temperature Range -10°C to +60°C
Storage Temperature Range -40°C to +85°C

Node Address Jumper

Product No. : 51153818-202 
Product Type : Node Address Jumper
The node address jumper is used to give the processors in 
the RUSIO-3224 or RUSLS-3224 module(s) 
the node address of the IOTA
Gray plastic jumper set
Has a (two digit) number that is clearly visible

Jumper Kit

Type of Jumper 
Electrical jumper connections 
for various industrial applications
Operating Temperature Range
Typically from -20°C to +70°C 
Storage Temperature Range -40°C to +85°C
Humidity 5% to 95% non-condensing

CEX-Bus Interconnection Unit

Bus Protocol:CEX-Bus
Data Rate:10 Mbps 
Fiber Type:62.5/125 μm multimode
Redundancy:Dual-path redundancy 
Node Capacity:Up to 32 nodes 
Power Supply:24 V DC (±10%)
Power Consumption;≤ 5 W
Isolation:2500 V AC

Softstarter

Type:Thyristor-Based Soft Starter
Rated Current:142 A 
Motor Power (400V):75 kW 
Input: 208–690V AC (±10%), 50/60 Hz
Control Circuit: 100–250V AC/DC
Current Limit: Adjustable (200–500% I_e)
Pump Stop: Anti-water-hammer control

Advanced Control Module

PERFECT HARMONY power cell 
G4E Cell 315A, 750 V
H-Bridge Operation: 750 V DC link
Rated Current: 315 A
Surge: Short-term 150% 
Thermal Output: ≤2.5 kW
DC link voltage:±750 V
Electronics: 0°C to +55°C (−10°C to +85°C storage)
Auxiliary Power: 24 V DC (±15%)

Control Card

Power Supply:24V DC
Voltage: 15–30V DC
Current: 3–8 mA
Rating: 2A @ 250V AC
Resolution: 10-bit
Load Impedance: ≥500Ω (voltage)
Baud Rate: 9600–115200 bps
Isolation:1500V AC

SPEED UP UNIT

Input Voltage:24 V DC
Power Consumption:≤ 8 W
Torque Response: ≤ 2 ms
Accel/Decel Rates: Up to 3x faster vs
Overload Capability: 200%
Type:Dynamic Performance Module 

Analog Input Board

Power Supply:24V DC (±10%) 
Power Consumption:≤ 4 W
Voltage: 0–10V
Current: 0–20mA
Resistance: Pt100/Pt1000 RTDC
Resolution:16-bit 
Sampling Rate：10 ms/channel
Voltage: ≥1 MΩ
Current: 250Ω ±0.1%
Channel-to-Channel: 300V AC
Channel-to-Backplane: 1500V AC

ANALOG INPUT BOARD

Power Supply:24V DC (±10%) 
Power Consumption:≤ 3 W
Input Channels:8x Isolated Voltage Inputs 
Resolution:16-bit 
Accuracy:±0.1% of FS (Full Scale) at 25°C
Input Impedance ≥1 MΩ
Sampling Rate:10 ms/channel
Channel-to-Channel: 300V AC
Overvoltage Protection:±30V continuous

Analog Input Module

Overload Protection:±30V (voltage)
Power Supply:24V DC 
Power Consumption:≤ 1.5 W
Input Channels:4x Isolated Channels
Voltage: 0–10V, ±10V, 0–5V
Current: 0–20mA, 4–20mA
Resolution:12-bit 
Sampling Rate:2 ms per channel
Voltage: ≥100 kΩ
Isolation:1500V AC 

DIGITAL INPUT CIRCUIT BOARD

Type:8-Channel Isolated 
Sink/Source: Auto-detecting
Voltage Range: 15–30V DC
Input Current 3–8 mA
Response Time:≤ 2 ms
Isolation:1500V AC 
Power Supply:24V DC
Power Consumption:≤ 1.8 W

Digital Output Module

Output Signal: 24V DC
Load Current per Channel:0.5A to 2A
Max Switching Voltage: 30V DC
Isolation Voltage: 500V AC/DC
Response Time: <1ms