ALL MANUFACTURERS

I/O Extender module

IO Extender modules, slot 20 and 21
Approvals: CE, TUV, UL, CSA, FM
Space requirements: 4 TE, 3 HE (= 4 HP, 3U)
Power requirements: 5 Vdc, 35 mA
Ripple content: < 50 mV p-p
Holes A5, A7
Large pins A5, A7

Horizontal IO bus backplane

Horizontal IO bus backplane for redundantIO
Slots:12 
Bus Type:Honeywell HBS
Bandwidth:800 Mbps per slot (shared bus)
Hot-Swap Support:Yes 
Power Distribution:Single 24V DC input 
Input Voltage:24V DC (±15%)
Power Consumption:20W (base), 250W (max load)
Isolation:1000V AC (slot-to-slot)
Surge Protection:±2kV 

Horizontal IO bus backplane

Horizontal IO bus backplane fornon-redundant IO
Slots:12
Bus Type:Honeywell HBS
Bandwidth:800 Mbps per slot 
Hot-Swap Support:Yes 
Power Distribution:Single 24V DC input
Input Voltage:24V DC (±15%)
Power Consumption:20W (base), 250W (max load)
Isolation:1000V AC (slot-to-slot)
Surge Protection:±2kV

IO Backplane for redundant IO

Model Number:FS-IOB-0001R
Type:Redundant I/O Backplane
Mounting:19" rack or DIN rail 
Input Voltage:Dual 24V DC
Power Consumption:30W (base), 400W (max load)
Isolation :1500V AC 
Surge Protection:±4kV 

Base I/O Module

Model Number:FS-IOB-0001S
Type:Base I/O Module (Non-Redundant)
Bandwidth:500 Mbps per slot
Hot-Swap Support:Yes 
Power Distribution:24V DC
Input Voltage:24V DC (±10%)
Power Consumption:15W (base), 120W (max load)
Isolation :1500V AC
Surge Protection:±1kV 

I/O Chassis for non-redundant I/O modules

IOCHAS-0001S is a chassis 
for up to 18 non-redundant IO module
Approvals: CE, UL, CSA, TUV, FM
5V-R: 35 mA (IO-0001 slot 21)

I/O Chassis for Redundant Module

The IOCHAS-0001R chassis 
up to 9 pairs 
redundant IO modules
Approvals: CE, UL, CSA, TUV, FM 
5V-1: 35 mA (IO-0001 slot 20)
5V-2: 35 mA (IO-0001 slot 21)

Bus Terminator

Model Number:FS-TERM-0002
Type: Bus Terminator
Termination Type:Active impedance matching
Nominal Impedance:100Ω ±1% 
Power Requirement:Backplane-powered 
Current Draw :15mA @ 24V DC
Isolation Voltage: 500V DC from backplane
Signal Reflection:<-30dB @ 1GHz

Bus Terminator

Model Number:FS-TERM-0002
Type: Bus Terminator
Termination Type:Active impedance matching
Nominal Impedance:100Ω ±1% 
Power Requirement:Backplane-powered 
Current Draw :15mA @ 24V DC
Isolation Voltage: 500V DC from backplane
Signal Reflection:<-30dB @ 1GHz

IO Extender Module

Input Voltage:24V DC (18-36V)
Power Consumption:2.5W (typical)
Isolation :1500V AC
Channel Capacity:16 points 
Signal Types:DI/DO/AI/AO 
Operating Temp:-40°C to +70°C
Storage Temp:-50°C to +85°C
Humidity:5-95% RH (condensing)
Vibration:5g @ 10-500Hz

IO Extender Module

Input Voltage:24V DC (18-36V)
Power Consumption:2.5W (typical)
Isolation :1500V AC
Channel Capacity:16 points 
Signal Types:DI/DO/AI/AO 
Operating Temp:-40°C to +70°C
Storage Temp:-50°C to +85°C
Humidity:5-95% RH (condensing)

Controller backplane

Model Number:FS-CPB-0001
Type:High-Speed Controller Backplane
Compatibility:ControlEdge 900/900X Series
Power Distribution:24V DC
Backplane Current:40A max
Isolation :1500V AC
Impedance:100Ω ±10% 

Chassis for redundant or non-redundant Controller

Chassis for redundant or non-redundant Controller 
Product No. : FS-CPCHAS-0001
Product Type : Chassis for Control Processor
Approvals : CE, UL, CSA, TUV, FM
Power : 
5V-1 : 0.05 A
5V-2 : 0.05 A

Guardmaster MSR125H Safety Relay

CLIPPER BOARD TURBO

80 MHz DSP56303 Turbo PMAC CPU
128K x 24 SRAM compiled 
assembled program memory
128K x 24 SRAM user data memory
1M x 8 flash memory for user backup & firmware
32K x 16 bank of dual-ported RAM
Latest released firmware

SPEED MEASURING BOARD

Speed Range:0–12,000 RP
Accuracy:±0.1% of full scale (25°C)
Resolution:1 RPM 
Supply Voltage:+24 V DC (±10%) 
Power Consumption:≤5 W
Input Sensitivity:50 mV–30 V RMS (MPU)
Isolation :1500 V AC (channel-to-logic)

Electropneumatic positioner

SIPART PS2 Smart
electropneumatic positioner
4...20mA, Ex/nEx, double-acting
polycarbonate enclosure
for pneumatic linear and part-turn actuators
Non-contacting (wear-free) position detection (NCS) 
Standard Without explosion protection
Connection thread el.: M20x1.5 
pneu.: G 1/4 Without limit monitor
Without option module

SIPLUS HMI TP1200 COMFORT

POWER INTERFACE BOARD

Input Voltage:24 V DC
Logic Voltage:+5 V DC (±5%), Max 8 A
Analog Voltage:±15 V DC (±5%), Max 1 A
Isolation 1500 V AC
2× Isolated Outputs
Power Redundancy:Supports dual power supplies

17-Slot Rear Mount Rack

Brand:GE Fanuc
Series:Rx7i PACsystem
Part Number:IC698CHS117
Description:PACSystems RX7i I/O Rack
Application:Rx7i System
Operating Voltage:5 to 12 Volts DC
Power Supply:350 Watts
I/O Capacity:18 I/O Slots
Fan Assembly:Optional

Rack Fan Assembly

Brand:GE Fanuc
Series:Series 90-70
Part Number:IC697ACC724
Product Description:Rack Fan Assembly
Operating Voltage:240 Volts AC
Input Power:16 to 17 Watts
Line Amps:0.09 to 0.10 Amps
Nominal Air Flow:71 CFM
Weight:5.94 Pounds