ALL MANUFACTURERS

Current Input Module

16, isolated
4 to 20 mA 
24 mA
270 Ω (20 mA) to 350 Ω (4 mA)
±16 µA 
230 mA (5 V DC), 540 mA (24 V DC)

Power supply module

Input Voltage Range:85-264V AC (47-63Hz) 
Output Voltage: 24V DC (±1% regulation)
Output Current: 10A 
Power Rating: 240W
Inrush Current: <30A (at 230V AC)
Overvoltage Protection: 28V DC 
Overcurrent Protection: 110-130% of rated current
Line Regulation: ±0.5% (85-264V AC)
Load Regulation: ±1% (20-100% load)

Modbus TCP/IP to EtherNet/IP Gateway

Backplanes

1 to 16 module slots
Seamless connection / possible
Stabile mechanics / compact design
Vibration proof fixing of modules
Can be snapped on EN 60715 DIN rail

Analog Input Module - HART

Digital Input Module

Driver board

Model Number: UF C911B108 3BHE037864R0108
Input Voltage: 24V DC 
Output Voltage: Adjustable based on application requirements
Operating Temperature: -20°C to 70°C (-4°F to 158°F)
Storage Temperature: -40°C to 85°C (-40°F to 185°F)
Humidity Range: 5% to 95% (non-condensing)

Communications I/O Module

PC D230 A
PEC80-CCM
3BHE022291R0101 
Excitation Controller Module 

Communications I/O module

PC D231 B: PEC80-CCI
3BHE025541R0101
AC 800PEC
CCI Converter Control Interface

Exciter Control Module

PCD235 A101 
PEC80-CIO FU
3BHE032025R0101 
UNITROL PC D235 
EXCITER CONTROL MODULE

Proximitor/Seismic I/O Module

Radial Vibration
Thrust Position
Differential Expansion
Shaft Absolute
Eccentricity
Acceleration
Velocity

Universal Safety Interface (conformal coated)

UNIVERSAL INTERFACE CONTROLLER
MOTOROLA 8260 COMMUNICATION PROCESSOR
8 MBYTE FLASH
4 MBYTE LOCAL SRAM
256 KB SHARED RAM
2 DUAL-SPEED FAST ETHERNET TRANSCEIVERS

Universal Safety Interface (conformal coated)

Control Board

Supply Voltage:24V DC (±10%)
Power Consumption:≤10W
Isolation:1500V AC
Processor:32-bit RISC microcontroller/DSP
Clock Speed:100-200 MHz
Analog Inputs:4-8 channels
Digital I/O:8-16 channels

Power Supply Module

Input Voltage:3-phase: 380-480V AC (±10%), 50/60Hz
Output Voltage:24V DC (±1%)
Output Current:20A (continuous)
Power Rating:480W
Efficiency:>92% (at full load)
Inrush Current:<40A (at 480V AC)

Control Board

Supply Voltage: 24V DC (±10%)
Power Consumption: 8W (typical)
Processor: 32-bit DSP
Clock Speed: 150 MHz
ADC Channels: 16-bit, 12 channels
Analog Inputs:6 channels 
Isolation:2500V AC

Control Board

Processor: Dual-core 32-bit DSP 
Clock Speed: 300 MHz
Power Supply: 24V DC 
Power Consumption: 12W (typical)
Isolation:3000V AC
Control Loop Speed: 25μs (basic)
PWM Resolution: 16-bit @ 8kHz
Protection Response: <10μs 

Control Module

Supply Voltage:24V DC 
Processor:Triple-core 32-bit DSP
Clock Speed:400 MHz 
Memory:512KB SRAM
Power Consumption:18W (typical)
Analog Inputs:12× 18-bit ΣΔ ADC (±15V, 500kS/s)
Analog Outputs:6× 16-bit DAC (0-10V/4-20mA)
Digital I/O:24× configurable (5V TTL to 30V DC)

Control board

Supply Voltage: 24V DC
Power Consumption: 6W typical
Isolation:2500V AC
Processor: 32-bit RISC
Clock Speed: 216 MHz 
Memory SRAM: 256KB
Analog Inputs:6 channels
Digital I/O:12 opto-isolated inputs 

Accelerometers

02 ¼-28 to M8 x 1.25 Stainless Steel
00 No Approvals
Broadband ElectricalNoise:350 µg 
Output Bias Voltage: 8 to 12 VDC
Excitation Voltage:18 to 28 VDC
Constant CurrentExcitation: 2 to 20 mA 

Analog Input Baseplate

Fault current130 mA,
typical200 mA, maximum
Current Input: 4–20 mA, 0–20 mA.
Voltage Input: 0–10 V DC, ±10 V DC
Resolution:16-bit resolution
Accuracy:±0.1% of full scale
Channel-to-channel isolation: 1500 V AC/DC
Operating Temperature:
-40°C to +70°C (-40°F to +158°F)
Storage Temperature:
-40°C to +85°C (-40°F to +185°F)