Voltage Range: 18 Vdc to 32 Vdc
Power Consumption: Maximum 1.7 W
Transmitter Power: Minimum -15 dBm
Receiver Sensitivity: -28 dBm
Maximum Propagation Time Difference: 80 ns
Maximum Fiber Length Difference: 15 m
Operating Temperature: 0°C to 60°C (32°F to 140°F)
Non-Operating Temperature: -25°C to 70°C (-13°F to 158°F)
Relative Humidity: 10% to 95% non-condensing
Voltage Range: 18 Vdc to 32 Vdc
Power Consumption: Maximum 1.7 W
Transmitter Power: Minimum -15 dBm
Receiver Sensitivity: -28 dBm
Maximum Propagation Time Difference: 80 ns
Maximum Fiber Length Difference: 15 m
Supply Ratings:20 - 32 Vdc, 45 W
Backplane (IMB) Supply:20 Vdc to 32 Vdc
Power Dissipation:45 W Backplane Supply
Module Location:T8300 Expander Processor Slot
Fusing Not User Serviceable
Operating Temperature :0 °C to +60 °C (+32 °F to +140 °F)
Storage Temperature: -25 °C to +70 °C (-13 °F to +158 °F)
Relative Humidity :10 % – 95 %, non-condensing
Visual indications of input power supply status.
Visual indication of individual fuse status.
Common alarm of fuse status via volt-free contact.
Link selectable supply voltage options
Voltage Range 22 Vdc to 28 Vdc
Input Current 60 A max
Conductor Clamping Range (LU10.16) 0.5 mm2 to 16 mm2
Max Switching Voltage 60 Vdc or 125 Vac
Operating Temperature 0 °C to +60 °C (+32 °F to +140 °F)
Non-operating Temperature -25 °C to +70 °C (-13 °F to +158 °F)
Supports up to three Trusted Sourcing Output Modules.
Dual stud power connection for either single or dual feed.
0 V module reference via BLZ 2-part connectors.
POWER SHELF 4U MOUNTING KIT POWER PORT MAINS PLUGS
19 inch x 1U chassis
for up to 3 Power Packs.
Includes 4U fixing kit,
Power Port (with push fit BLZF3.5/10 connector),
mains plugs and retaining clips
Cable Type: Multi-core shielded cable
Length: 2 meters
Voltage Rating: Typically rated for 300 V AC/DC
Current Capacity:4–20 mA analog
Operating Temperature: -40°C to +85°C
Cable Type: Multi-core shielded cable
Length: 2 meters
Voltage Rating: Typically rated for 300 V AC/DC
Current Capacity:4–20 mA analog
Operating Temperature: -40°C to +85°C
Communications Cable Assembly
From Communication Interface (T8151) to flying leads
Impedance: 100–120 Ω (for twisted-pair cables).
Voltage Rating: 300 V AC/DC (typical).
Data Rate: Up to 1 Gbps
Operating Temperature: -40°C to +85°C
2 x 30 mm (1.2 in) Trusted Expander Processor Slots
12 x 30 mm (1.2 in) single width Trusted I/O Module Slots.
No user-serviceable parts inside.
Fast assembly.
Minimum tooling/parts.
32, 48, 64 and 96-way
DIN 41612 I/O port connector capability
Cable entry options.
Convection cooling of modules through the Chassis
Gain Resolution:32- bit floating point
Servo output Type:Analog Voltage
Voltage Range:±10V dc
Analog output resolution 16 bits
Discrete outputs:Solid-state isolated relay contacts
Discrete output operating voltage:24VDC, Nominal.
Axes per Module:2
Axes per Controller:32
Backplane Current (5Volts):700 milliamps
Backplane Current (24Volts):2.5 milliamps
Outputs:8
Module Type:Digital AC Output Module
Voltage:120-240 Volts AC
Voltage Category:120 / 240 Volts AC
Operating Voltage Range:74-265 Volts AC
Current per point:0.5 A @ 60 °C (140 °F)
Current per group, max:2 A @ 60 °C (140 °F)
Backplane Current at 5 Volts:200 mA
Isolation Voltage:50 Volts Continuous
Power Dissipation:(Max) 5.1 W @ 60 °C (140 °F)
Backplane Current at 24 Volts:2 mA
Series:ControlLogix
Module Type:Processor Module
I-O Memory:0.98 MB
User Memory:8 MB
Maximum I-O:128,000
Maximum Analog I-O:4,000
Maximum Digital I-O:128,000
Current Draw (1.2 Volts DC):5 milliamps
Current Draw (5.1 Volts DC):800 milliamps
Power Dissipation:2.5 Watts
Thermal Dissipation:8.5 BTU per hour
Isolation Voltage:30 Volts Continuous
Series:ControlLogix
Module Type:GuardLogix Controller
I-O Memory:0.98 MB
User Memory:4 MB
Maximum I-O:128,000
Maximum Analog I-O:4,000
Maximum Digital I-O:128,000
Current Draw (1.2 Volts DC):5 Miliamperes
Series:ControlLogix
Module Type:Processor Module
I-O Memory:0.98 MB
User Memory:2 MB
Maximum I-O:128,000
Maximum Analog I-O:4,000
Maximum Digital I-O:128,000
Current Draw (1.2 Volts DC):5 Miliamperes
Series:ControlLogix
Module Type:Processor Module
I-O Memory:0.98 MB
User Memory:32 MB
Maximum I-O:128,000
Maximum Analog I-O:4,000
Maximum Digital I-O:128,000
Current Draw (1.2 Volts DC):5 milliamps
Current Draw (5.1 Volts):800 milliamps
Power Dissipation:2.5 Watts
Thermal Dissipation:8.5 BTU per hour
Isolation Voltage:30 Volts Continuous
Module Type:GuardLogix Controller
I-O Memory:0.98 MB
User Memory:9 MB
Maximum I-O:128,000
Maximum Analog I-O:4,000
Maximum Digital I-O:128,000
Current Draw (1.2 Volts DC):5 Miliamperes
Current Draw (5.1 Volts DC):800 Miliamperes
Power Dissipation:2.5 Watts
Thermal Dissipation:8.5 BTU per hour
Isolation Voltage:30 Volts Continuous
Standard Memory:4 Megabytes
I/O Memory:0.98 Megabytes
Max Total I/O:128,000
Max Analog I/O:4000
Max Digital I/O:128,000
Ethernet Ports:4 Ethernet M12 Category 5E
USB Ports:USB 1.1 Full Speed (12 Mbps)
Nom Input Voltage:24 Volts DC
Input Voltage Range:18-32 Volts DC
Enclosure Type:UL Type 4/4x
Bulletin Number:PowerFlex 753 AC Drive,
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:186 Amps, 150HP ND, 125HP HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 6
EMC Filtering Options:Filtered,
CM jumper installed (preferred)
Dynamic Braking:DB Transistor
