1734IT2I
I/O MODULE
TEMPERATURE
2 DIFFERENTIAL THERMOCOUPLES INPUTS
175 MA POINT BUS CURRENT
24 VDC
Tariff Code: 8538907080
Country of Origin: Singapore
AC SERVO DRIVE
VARIABLE FREQUENCY
3 PHASE
380/480 VAC
50/60 HZ
20 HP
29 AMP
NORMAL DUTY
OPEN LOOP VECTOR CTRL
CLOSED LOOP IND MOTOR CTRL
REGENERATIVE CONTROL
Battery Pack REV 2 for
Electronic Timer Module
Battery Pack REV 2 for
Electronic Timer Module Ex ia IIC T6 Ga /
Ex iaD 20 T85C Tamb -20ºC to +60ºC
Aluminium casing.
CERTIFIED AS PART OF FM 10ATEX0003X AND
IECEx FME10.0001X. This battery is a part of
D779/ET MiniPurge ML433
Discrete output number16
Discrete output typeSolid state protected
Discrete output voltage:24 V DC positive conforming to EN/IEC 61131-2 19...30 V
Discrete output current:0.5 A
Current per channel:0.625 A
Minimum load impedance:48 W
isalotion resistance:> 10 MOhm 500 V
Current consumption:80 mA at 5 V DC
Discrete input voltage:24 V DC positive
Sensor power supply:19…30 V
Discrete input current:3.5 mA
isalotion resistance:< 10 MOhm 500 V DC
ambient air temperature for operation:0…60 °C
Ambient air temperature for storage:-25…70 °C
32 channels for 24 V d.c
2 isolated groups (RIV50V)
with 16 channels and one process
voltage supervision input in each group
The process voltage range is 12-32V dc
(nominally 24V dc) and the maximum continuous
output current is 0.5A per channel
Series:Versamax
Manufacturer:Emerson Automation / GE Fanuc (former)
Part Number:IC200ALG264
Series:VersaMax
Type:Input Module
Channels:15 single ended, one group
Wiring configuration:Single-ended
Isolation:250VAC continuous; 1500VAC for 1 minute
No. of groups:1 group
LED Indicators:Yes OK LED
Compatible signals:4 to 20 mA / 0 to 20 mA
Resolution:15 bit
Diagnostics:Yes
External Supply Voltage Range:None
Input Currents:1 to 20 mA
Input Impedance:100 ohms
Backplane current:100 mA
Update rate:7.5 ms, maximum
Accuracy:0.3% typical, 1% maximum
Resolution:15 Bits
Current Draw:100 mA, maximum
Output 12/24VDC POS LOGIC 0.5A per point (2 groups of 16) 32 points
No. of channels:Thirty-Two (32)
Current per Point:0.5 Amperes
Output Voltage Range:+10.2 to +30VDC
No. of input groups:Two (2)
Backplane Current:90 milliamperes
Output voltage, nominal:12 / 24VDC
No. of channel per group:Sixteen (16)
Current Draw:90 mA, maximum
External Power supply:+10.2 to +30VDC
Series:Series 90-30
Manufacturer:GE Fanuc
Part Number:IC693PBM200
Product Description:Profibus Master Module
Communication interface:One (1) RS232 Service port; One (1) Profibus Master Port
Communication protocol:ProfiBus
No. of supported DP slave:125
Data rates:All standard data rates
Input data:244 Bytes
Output data:244 Bytes
Current draw:450mA @ 5VDC
Product Lifecycle Status:Discontinued/Obsolete
Operating temperature:0 to 60 degrees Celsius
