ALL MANUFACTURERS

Measurement and counter module

Measurement and counter module
Modicon Premum
2 channels modularity
thermal tripping protection
7 to 10W
10kHz

Power supply module

Power supply module
Modicon Premium
input current of 300mA
secondary power of 26W
85 to 264VAC

TSXDEY16A5

Modicon Premium
16 inputs
compatible with 
2/3 wires proximity sensors
0.83W, 15mA

USB annunciator/numeric keyboard

Power Requirements 5 VDC, ± 5% a
USB Annunciator Keyboard: 300 mA (max)
Output Impedance: 1200 Ohms Nominal
Nominal Level: 0.437 to 0.133
Peak to Peak Amplitude, Vpp: 0.872
Operating Temperature 0 to 40°C (32 to 104°F)
Storage Temperature -40 to +70°C (-40 to 158°F)
Humidity range, storageand operating:
20% to 80%, non-condensing

HMS Networks

Product:X-Gateways
Data Rate:100 Mb/s
Number of Ports:2 x RJ45
Interface Type:Ethernet, USB
Supply Voltage - Min:24 V
Supply Voltage - Max:24 V
Packaging:Bulk
Brand:HMS Networks

SLC 500 Memory Module

Module Type:Memory Module Adapter
Memory:8 kilobytes, 1,000 instructions
Memory Type:EEPROM
User Memory:64,000 Words
Program Scan Time:0.9 milliseconds
I/O Scan Time:0.225 milliseconds
I/O Chassis:3
Chassis Module Slots:30
Communication:Ethernet, RS-232

Monitored Digital Input Module

Safetybus Power 0.85 load units
Number of Inputs 16, common power return
Vibration10 to 55 Hz: ±0.15mm
Turn-On Voltage (default) > 12 Vdc
Voltage: 15 to 80 VDC
Current:450 mA, maximum

Controller Circuit Board

CONTROL BOARD
Controller Circuit Board
FOR POWERFLEX 7000
FOR AC DRIVE
PWM ONLY
PCB BOARD
Analog Control Board for 18 Pulse Drive

Serial Communication Module

Interface:RS-422/RS-485 (2 ports)
How connected:Multipoint
How communicates Half-duplex/Full-duplex
How synchronizes Start-stop synchronization
Transmission code ASCII/binary
Character length:7/8 bits
Stop bit :1/2 bits
Parity check None/even/odd
Transmission distance Maximum:1200 m
Current consumption:500 mA

Digital Input Module

Number of input channels:32
Rated input voltage:24 V DC
Input ON voltage:18 to 26.4 V DC
Input OFF voltage:5.0 V DC or less
Input current (at rated input voltage):4.1 mA±20 % / channel
Instantaneous allowable maximum input voltage:30.0 V DC
Input response time:8 ms or less
Minimum ON detection time:20 ms 
Maximum ON/OFF cycle:25 Hz
Maximum current consumption:500 mA (5 V DC)

Pulse Input Module

Number of input channels:8, isolated channels
Input frequency:0 to 10 kHz
Minimum input pulse width:40 μs
Shunt resistance Select from:OFF/200/500/1000 Ω
Pull-up resistance:68 kΩ (12 V DC or 24 V DC
Data refresh cycle:2 ms
Filter function Can select a filter that eliminates chattering 
Transmitter power supply 
Can select:24 V DC/12 V DC.

Digital Output Module

Number of output channels:64
Rated applied voltage:24 V DC
Load voltage:24 V DC, 100 mA
Field power supply voltagerange:20.4 to 26.4 V
Output ON voltage maximumvalue:2 V DC
Leak current maximum valuewhen output OFF:0.1 mA
Output format:Current sink

Current/Voltage Input Module

Number of input:channels16, non-isolated
Input signal:4 to 20 mA
Allowable input current/voltage:27 mA
Accuracy:±0.1% of full scale
Data refresh cycle:10 ms
Input step response time:100 ms
Transmitter power supply:22.8 to 26.4 V 
Setting of 2-wire or 4-wiretransmitter 
For each channel by setting pin

RTD Input Module

Allowable input voltage ±5 V.
Withstanding voltage :1500 V AC for 1minute 
Power ON 2 MΩ or more
Power OFF 2 MΩ or more
Accuracy ±0.03% of full scale (for 0 to 400 Ω)
Allowable total resistance of signalsource plus wiring:40 Ω or less 
(wiring resistance per wire)
Temperature drift:Max. ±30 ppm/°C.
Maximum current consumption:450 mA (5 V DC)

Power supply module

Power supply module
(220-240 V AC input)
Standard type with no explosionprotection
Basic type
With ISA Standard G3 option

SINUMERIK I/O MODULE

SINUMERIK I/O MODULE 
PP 72/48D PN 72 I 
DIGITAL48 O DIGITAL
DC 24 V, 0,25 A

Analog Current Output Module

Outputs per module 2 channel single-ended, nonisolated
Output current 0…20 mA
Resolution 12 bits, 1/4096 max, 4.88 µA/bit
Converted data Binary data 0000 to 0fff (max scale)
Conversion time 2 ms/channel
Overall accuracy 0.2% Full scale @ 0…55 °C
Calibration None required
Allowable external output load resistance600 Ω max 

Distance Fiber Module

Fiber Type:200/ 230 micron HCS (hard-clad silica) fiber
Fiber Operating Wavelength:650 nm (red)
Attenuation Levels:4.2 dB
Input Power:5V DC
Typical Repeater Distance:0-300m
Backplane Current Draw:300 mA
Product Line:ControlNet Repeater
Repeater Type:Repeater Short-Distance Fiber Module

SLC 500 Backup Scanner Module

Series:SLC 500
Module Type:Backup Scanner Module
Compatible Processors:SLC 5/02, 5/03, 5/04, 5/05
Backplane Current (5 Volts):800 milliamps
Operating Temperature:0-60 Celsius
Cable:Belden 9463
Connectors:6-Pin Phoenix Connector
Weight:2.5 pounds (1.1 kilograms)

power block

SINAMICS 
Replacement power block 
for 675-1080 V DC
910 A

VCU-160 MODULE

Manufacturer: Alfa Laval
Model Number: 3183052091
Product Name: VCU-160 Module
Application: HVAC systems
Input Voltage: Typically 24V DC or 230V AC
Operating Temperature Range: -20°C to +55°C
Protection Rating: Typically IP20 

Heatpac Control Module

Manufacturer: Alfa Laval
Model Number: 3183034171
Product Name: Heatpac Control Module
Application: HVAC systems
Input Voltage: Typically 24V DC or 230V AC
Operating Temperature Range: -20°C to +55°C

Processor Unit

SIMOVERT 
ASTERDRIVES VECTOR CONTROL 
CONVERTER COMPACT UNIT, 
IP20 3 380-480V AC, 
50/60HZ, 72 A NOM. 
POWER RATINGS: 
37KW DOCUMENTATION ON CD

Input Module

Part Number/Catalog No.:1734sc-IF4U
Product Type:Input Module
Rockwell Compatible Series:Point I/O
Channels:4
Input Type:Analog
Resolution:18 bits
Input Impedance:253 ohm
Input Overcurrent Protection:32 mA cont
Thermal Dissipation:1 W min

Analog I/O Module

MICRONET SIMPLEX LV DISCRETE FTM
INPUT VOLTAGE RATING: 27.4 AMP 18-32 VDC
OUTPUT VOLTAGE RATING: 16 AMP 24VDC
POWER SUPPLY INPUT: (18 TO 32) V (DC)
SIGNAL TO ACTUATOR: 0 TO 200 MA
NETWORK ISOLATION: 0–60 HZ: 1000 VRMS