Range Compatibility PacDrive 3
Maximum mechanical speed 4000 rpm
rated supply voltage 115...480 V
Phase Three phase
Continuous stall current 7.8 A
Continuous power 2900 W
Maximum current Irms 20.8 A
Range Compatibility PacDrive 3
Maximum mechanical speed 6000 rpm
rated supply voltage 115...480 V
Phase Three phase
Continuous stall current 3.5 A
Continuous power 1190 W
Maximum current Irms 12 A
Input Voltage: 24 V DC ±10% or 120-240 V AC
Power Consumption: Typically 20-30 watts
Operating Temperature Range: 0°C to 50°C (32°F to 122°F)
Storage Temperature: -20°C to 70°C (-4°F to 158°F)
Output: Analog (typically 4-20 mA)
M-Bus slave interface According to
EN 1434-3 and EN 13757-2/-3
Quiescent current ≤ 1.5 mA
Standard load 1UL
Addressing Primary or secondary
Baud rate 300, 2400 Baud
Polarity AnyDC decoupling Through module interface
Length of connection cable 2.95 m
Range compatibility PacDrive 3
Product or componenttypeServo motor
Device short name SH3.....P
Maximum mechanical speed 8000 rpm
rated supply voltage 115...480 V
Network number of phases Three phase
Continuous stall current 1.8 A
Continuous power 690 W
Maximum current Irms 5.7 A
Shaft end Smooth shaft
Power Supply:48V DC
Optical Interfaces:May support SFP
Ethernet: IEEE 802.3
Operating Temperature:-5°C to +55°C
Storage Temperature:-40°C to +70°C
Humidity:5% to 95% non-condensing
Voltage: Typically available in 230V or 400V
Frequency: 50/60 Hz
Motor Power: 0.2 kW
Protection Rating: IP54 or higher
Operating Temperature: -10°C to +40°C
Loop-powered
4-20 mA output proportional to acceleration
(ST6911) orvelocity (ST6917)
Loop terminals with Independent Polarity
(IPT®)to prevent incorrect wiring
Interfaces directly with PLC, DCS, 4-20 mA monitors, etc
M6 x 1 or 1/4 - 28” mounting studs
MIL style connector standard
Widest operating temperature in its class
Most stable detection circuit available
Temperature shock protected
“Ski slope” problem protected for high accuracy at lowfrequencies
Hermetically sealed
Bus expansion slave module
with 2 interfaces
Bus expansion slave module optionally
with integrated power supply
Up to 6 local substations
Minimal signal delay
Distances of up to 3 m between 2 stations
Integrated watchdog on slave modules
COMPRESSOR CONTROLLER
MK5 STD
Power Supply: 24 VDC
Operating Temperature: -10°C to +50°C.
Humidity: Up to 95% non-condensing.
Power Consumption: Low-power operation
Product:X-Gateways
Data Rate:100 Mb/s
Number of Ports:2 x RJ45
Interface Type:Ethernet, USB
Supply Voltage - Min:24 V
Supply Voltage - Max:24 V
Minimum Operating Temperature:- 25 C
Maximum Operating Temperature: + 65 C
Brand:HMS Networks
Dimensions:114 mm x 44 mm x 127 mm
IP Rating:IP20
Operating Supply Current:200 mA
Product Type:Gateways
Product:X-Gateways
Data Rate:12 Mb/s
Interface Type:Ethernet, USB
Supply Voltage - Min:24 V
Supply Voltage - Max:24 V
Minimum Operating Temperature: - 25 C
Maximum Operating Temperature: + 65 C
Brand:HMS Networks
IP Rating:IP20
Operating Supply Current:200 mA
Interface Type:USB
Minimum Operating Temperature: - 25 C
Maximum Operating Temperature: + 55 C
Brand:HMS Networks
Operating Supply Current:150 mA
Operating Supply Voltage:24 V
Type: EHPM02
Series: Experion PKS system
Voltage Requirements:24 V DC
Operating Temperature: -40°C to 70°C
Storage Temperature: -40°C to 85°C
Relative Humidity: 5% to 95% (non-condensing)
