ALL MANUFACTURERS

Transformer Protection

Rated Current:1A or 5A
Voltage Inputs:100-240V AC
Burden:<0.2VA (current)
Current (0.1-40In):±0.5%
Voltage:±0.2%
Frequency:±0.01Hz
Operating range: 1.05-1.4 pu V/Hz

Control Card

Operating Voltage: 24V DC 
Power Consumption: < 5W
Analog I/O (if applicable):0-10V, 4-20mA

Analog Input Board

Input Channels:16 
Input Types:4-20mA
Resolution:16-bit (0.0015% FS)
Accuracy:±0.1% FS
Update Rate:100ms (all channels)
Isolation Voltage:1500V AC
Overvoltage:30V continuous
Surge Protection:4kV 

LV AC industrial wall-mounted single drive

3AUA0000090441
ACS880-01-096A-5 
PN: 55 kW, IN: 96 A
LV AC industrial wall-mounted single drive
IEC: Pn 55 kW, 96 A, 500 V
UL: Pld 75 Hp, 96 A, 460 V

LV AC industrial wall-mounted single drive

ACS880-01-040A-5
3ABD00037851-D
Type Designation:ACS880-01-040A-5
LV AC industrial wall-mounted single drive 
IEC: Pn 22 kW, 40 A (ACS880-01-040A-5)
PN: 22KW, IN: 40A

LV AC industrial wall-mounted single drive

ACS880-01-04A8-5
3AUA0000090430
LV AC industrial wall-mounted single drive
IEC: Pn 2.2 kW, 4.8 A, 500 V
UL: Pld 3 Hp, 4.8 A, 460 V
PN: 2.2 kW, IN: 4.8 A
 (ACS880-01-04A8-5)

LV AC industrial wall-mounted single drive

ACS880-01-021A-5
3AUA0000090435
LV AC industrial wall-mounted single drive 
IEC: Pn 11 kW, 21 A, 500 V
UL: Pld 15 Hp, 21 A, 460 V 
PN: 11.0 kW, IN: 21 A
(ACS880-01-021A-5)

PC BOARD ASSEMBLY

Main Processor:216MHz
Memory:512MB DDR3
A/D Conversion:16-bit, 1μs sampling
Analog Inputs:12x (±10V/4-20mA, 16-bit)
Digital I/O:24x (24V DC, opto-isolated)
Communication Ports 2x RS-485

PCB Assembled Board

Processors:3x PowerPC e500mc @ 800MHz
Memory:1GB DDR3 + 512MB Flash
Control Cycle:100μs (minimum)
A/D Resolution:16-bit 
Analog Inputs:16x (±10V/4-20mA)
Digital I/O:32x (24V DC, opto)
Communication:Ports 2x Gigabit Ethernet

PROFIBUS Fieldbus Interface

FieldBusPlug family of bus connectors
Current Rating: Up to 630A
Voltage: 1000V AC
Material: Tin-plated copper alloy
Protocol: PROFIBUS DP-V1
Speed: Up to 12 Mbps
Isolation: 1500V AC

Data Interface Board

Supply Voltage:24V DC (±10%)
Power Consumption:5W (typical)
Isolation Voltage:1500V AC
Serial Ports:2x RS-485 (Modbus RTU)
Ethernet Ports:2x 10/100BASE-TX (Modbus TCP)
Protocols Supported:Modbus, IEC 60870-5-104, DNP3.0
Baud Rate:300-115200 bps

Standard Signal Condition Board

Number of Channels:8 
Input Types Supported:4-20mA, 0-10V
Input Impedance:250Ω (current)
Maximum Input:24mA
Common Mode Rejection:>100dB @ 50/60Hz
Accuracy:±0.1% of span 
Output Types:4-20mA (active/passive), 0-10V
Load Capacity:600Ω (current), 5mA (voltage)
Resolution:16-bit (0.0015% of span)
Update Rate:10ms per channel

Digital Output Module

Output Channels 32
Output Type SINK (Open Drain)
Load Voltage 15 30 VDC 
MaximumLoad Current 0.1 A per channel (Max)
Galvanic Isolation 1000 VAC RMS for System – to – 
Field isolation (user supplied field Power)
On-State Voltage 0v VDC (load current @ 0.1A max )
Off-State Voltage 24 V (typ),
Off-State Leak Current 100 µA (max)
Turn-On/Turn-Off Time 10 ms (max)

Current Output Module

Number of output channels 8 channels, module isolation
Rated output range 4 to 20 mA
Maximum range of guaranteed precision 1.25 to 23 mA
Output range 1.25 to 23 mA
Allowable load resistance @ rated range 230 to 600 Ω
Accuracy ±48 µA
Data update frequency 40 ms
Temperature drift ±16 µA/10 ºC
Withstand voltage 1.5 kV AC between output signal and system for 1 minute

10 Slot Back plane

Data Rate:Up to 10 Mbps 
Signal Type:RS-485
Max Cable Length:100m
Termination:120Ω resistor
Cable Length:2m
Jacket Material:PUR (oil-/UV-resistant)
Bending Radius:≥5× cable diameter 

PCB Board

Operating Voltage:24-250V DC/AC
Power Consumption:5-15W
Isolation Voltage:2kV AC 
Signal Levels :5V TTL, 24V DC 
Layer Count:6-layer PCB