PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 200150, 200155 and 200157 Accelerometers
- 200151-XX-XX-XX MOD:323357-15-03-00
In Stock
Fast Shipping Available
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
200151-XX-XX-XX MOD:323357-15-03-00 - Accelerometer Interface Standard Cable
Bently Nevada 200151-XX-XX-XX MOD:323357-15-03-00 identifies a modified 200151 accelerometer interface cable. The published standard 200151 arrangement has connectors at both ends. The specifications below are series reference data, not a decoding or certification of the custom modification.
The standard cable specification describes four 22 AWG conductors, a braided shield with drain wire and a PVC jacket. The supplied MOD assembly requires its own configuration check: actual length, armor and coupling-nut options are not established by the wildcard model or the available series datasheet.
The standard cable specification describes four 22 AWG conductors, a braided shield with drain wire and a PVC jacket. The supplied MOD assembly requires its own configuration check: actual length, armor and coupling-nut options are not established by the wildcard model or the available series datasheet.
BEFORE YOU BUY
Check the complete ordered configuration
ACTUAL APPLICATIONS
Where 200151-XX-XX-XX MOD:323357-15-03-00 supports measurement tasks
The manufacturer documents these sensor/interface applications. Cable use is conditional on confirming the actual MOD assembly and its mating connections.
-
01 · CASING MEASUREMENT
Connect a casing-vibration measurement point
Use the applicable 200151 cable arrangement between a documented accelerometer and its approved interface to carry the casing-vibration signal. Confirm both mating connections and the actual MOD wiring before use; the cable itself does not establish sensor sensitivity or monitor scaling. -
02 · LOW-FREQUENCY MONITORING
Retain the correct slow-machine signal chain
The source describes low-frequency monitoring with the 200155 and its designated ProTIM option. Where the controlled installation specifies a 200151 cable, verify the modified assembly and the 15.24 m maximum cable length for that sensor; do not apply the general 25 m limit instead. -
03 · BEARING ENVELOPING
Support an engineered enveloping channel
The source pairs 200157 with its designated acceleration-enveloping ProTIM option for roller-element bearings and certain cavitation effects. Check that the ordered cable matches that engineered connection; neither a connector match nor the 200151 family name proves the complete MOD assembly is suitable.
Technical specifications for 200151-XX-XX-XX MOD:323357-15-03-00
-
Product Model200151-XX-XX-XX MOD:323357-15-03-00
-
Product ParametersAccelerometer Interface Standard Cable
-
In stock1 unit
-
ManufacturerBently Nevada
-
Conductor count4
-
Conductor size22 AWG
-
Shield constructionBraided shield with drain wire; minimum 85% coverage
-
Outer jacketPVC
-
Coupling nut finishNickel-plated in the standard cable construction
-
Operating temperature-20 to +100 deg C
-
Connector sealingIP67 at the connection to the transducer and mating hardware
-
Connector constructionMolded to the cable
-
Minimum bend radius63.5 mm (2.5 in), published for 200151
-
Cable termination arrangementConnectors on both ends, standard 200151 series arrangement
View all additional
Alternative Names
200151-XX-XX-XX MOD:323357-15-03-00
200151 Accelerometer Interface Cable
200151 Standard Cable with Connectors on Both Ends
Technical notes
The following values are the manufacturer's published 200151 series cable specifications. They do not decode or independently certify the custom configuration identified by MOD:323357-15-03-00. Verify the modification drawing for the supplied assembly before installation. Flexing or bending below -20 °C may damage the cable.
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM CONFIGURATION
Match the installed measurement arrangement
Bently Nevada 200151-XX-XX-XX MOD:323357-15-03-00 identifies a modified 200151 accelerometer interface cable. The published standard 200151 arrangement has connectors at both ends. The specifications below are series reference data, not a decoding or certification of the custom modification.
The standard cable specification describes four 22 AWG conductors, a braided shield with drain wire and a PVC jacket. The supplied MOD assembly requires its own configuration check: actual length, armor and coupling-nut options are not established by the wildcard model or the available series datasheet.
Select the correct sensor and interface together. The source distinguishes standard velocity, low-frequency and acceleration-enveloping arrangements; an interface cable is not a substitute for that system selection.
Features:
- Series-reference specifications
- Four-conductor standard construction
- Preserved wildcard and MOD identity
The 200151-XX-XX-XX MOD:323357-15-03-00 requires exact configuration and installation checks before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Retain the entire wildcard and MOD identity when matching the installed assembly. The available standard table does not prove that any standard catalog option is a direct replacement.
The standard cable specification describes four 22 AWG conductors, a braided shield with drain wire and a PVC jacket. The supplied MOD assembly requires its own configuration check: actual length, armor and coupling-nut options are not established by the wildcard model or the available series datasheet.
Check mating hardware, route and circuit assignment against controlled installation documents. The series cable facts on this page are not an acceptance certificate for the custom assembly.
Features:
- Series-reference specifications
- Preserved wildcard and MOD identity
- Custom configuration requires verification
The 200151-XX-XX-XX MOD:323357-15-03-00 requires replacement verification of the complete ordered configuration and installed measurement system before commissioning.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: These downloads contain standard 200151 series reference data and source-supported checks only. They do not establish the configuration of MOD:323357-15-03-00. The Manufacturer's Manual is a technical-data extract, not a complete operation manual or MOD drawing.
Features:
- Sources: Bently Nevada 164986 Rev. Y, series reference only
- Use complete equipment instructions for installation and commissioning.
- Accessories are supplied only when listed in the quotation
Documentation for the 200151-XX-XX-XX MOD:323357-15-03-00 is supplied here as a technical-data extract; confirm manual availability in the written quotation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size20.5 × 22.4 × 3.3 cm
-
Shipping weight0.10 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8544422100
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 200151-XX-XX-XX MOD:323357-15-03-00
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Does the MOD identifier establish a 1.5 m cable in this listing?
No. The available standard ordering table does not decode modification 323357-15-03-00. This page intentionally leaves the actual supplied length unasserted; obtain the modification drawing or check the identified assembly. -
Why are the XX fields retained instead of selecting standard options?
The user-confirmed product identity contains literal XX fields. They are not authorization to replace the custom assembly with a standard 2 m, 4 m or 6 m cable. -
Can the cable jacket be flexed below minus 20 degrees C?
The standard cable specification warns that flexing or bending below -20 degrees C may damage it. Lower-temperature use is conditional on preventing such movement; it is not an unrestricted flexible-cable rating. -
What part of the published connection carries the IP67 statement?
The statement describes the connectors sealing to the transducer and mating hardware. It is not a certification of an open connector, a damaged connection or the complete installed monitoring system. -
Are four conductors the same as four measurement channels?
No. Four conductors describe the standard cable construction. They do not specify the number of measurement channels or replace the interface wiring diagram. -
Which bend-radius figure belongs to the 200151 reference?
The manufacturer publishes 63.5 mm for 200151. The 73.7 mm figure on the same page belongs to 200152 and must not be substituted without an approved configuration basis. -
Is 25 m an unconditional allowable run with a 200155 sensor?
No. The source specifically limits 200155 cable length to 15.24 m. The general cable section lists 25 m; the sensor-specific restriction takes precedence and neither figure states this MOD assembly actual length. -
What does the manual download establish for an integrator?
It provides selected manufacturer series pages and identifies the data boundary. It is not the 323357 modification drawing, a complete operating manual or evidence that unlisted custom options are interchangeable.
READY TO VERIFY YOUR PART?
Get a 200151-XX-XX-XX MOD:323357-15-03-00 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
200151-XX-XX-XX MOD:323357-15-03-00Accelerometer Interface Standard CableManufacturer: Bently NevadaView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
