PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 31000 and 32000 Proximity Probe Housing Assemblie
- 31000-16-10-00-030-02-02
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
31000-16-10-00-030-02-02 Radial Proximity Probe Housing
Bently Nevada 31000-16-10-00-030-02-02 is a radial proximity probe housing assembly with an installed 3300 XL 8 mm probe configuration. The conductive PPS housing and stainless-steel sleeve provide external access for probe adjustment and replacement in compatible machinery-monitoring installations.
This article includes a 1.0 m probe lead, 0.0-inch standoff adapter option and 3.0-inch probe penetration. Option 02 supplies two 3/4-14 NPT conduit fittings and one plug; the mounting thread is also 3/4-14 NPT. The housing provides mechanical and environmental protection and is not an explosion-proof enclosure.
This article includes a 1.0 m probe lead, 0.0-inch standoff adapter option and 3.0-inch probe penetration. Option 02 supplies two 3/4-14 NPT conduit fittings and one plug; the mounting thread is also 3/4-14 NPT. The housing provides mechanical and environmental protection and is not an explosion-proof enclosure.
BEFORE YOU BUY
Confirm the complete radial proximity probe housing
ACTUAL APPLICATIONS
Application context for 31000-16-10-00-030-02-02
31000-16-10-00-030-02-02 supports compatible vibration and position monitoring across the following operating environments.
-
01 · POWER GENERATION
Thermal Electricity and Combined Cycle Energy
Thermal Power GenerationCombined Cycle Energy -
02 · HYDROPOWER
Hydroelectric Energy and Pumped Storage Power
Conventional Hydroelectric EnergyPumped Storage Hydropower -
03 · OIL & GAS
Upstream Petroleum and Natural Gas Environments
Offshore Oil and GasOnshore Natural Gas
Technical specifications for 31000-16-10-00-030-02-02
-
Product Model31000-16-10-00-030-02-02
-
Product ParametersRadial proximity probe housing
-
In stock1 unit
-
ManufacturerBently Nevada
-
Installed probe configuration3300 XL 8 mm
-
Probe lead length1.0 m
-
Conduit fittingsTwo 3/4-14 NPT fittings and one plug
-
Mounting thread3/4-14 NPT
-
Housing materialGlass-reinforced conductive PPS thermoplastic
-
Sleeve and retaining chainAISI 304 stainless steel
-
Outer sleeve and exterior screwsAISI 303 stainless steel
-
Housing O-ring materialNeoprene
-
Retaining nut torque29.4 N m
-
Protection ratingType 4X and IP66
-
Housing static load test912 N applied 38 mm from the unsupported end
-
Ambient housing impact test7 J
-
Installed probe operating temperature-51 to +177 deg C
-
Hole plug nut torque0.5 N m
-
Measurement orientationRadial vibration or Keyphasor measurement
View all additional
Alternative Names
31000-16-10-00-030-02-02
31000 and 32000 Proximity Probe Housings
8 mm radial probe enclosure
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 31000-16-10-00-030-02-02
Bently Nevada 31000-16-10-00-030-02-02 is a radial proximity probe housing assembly with an installed 3300 XL 8 mm probe configuration. The conductive PPS housing and stainless-steel sleeve provide external access for probe adjustment and replacement in compatible machinery-monitoring installations.
For 31000-16-10-00-030-02-02, compare the complete ordered mechanical configuration with the installed mounting, cable connection and transducer family. Preserve documented clearances, cable routing and grounding.
Apply the manufacturer instructions for 31000 and 32000 Proximity Probe Housings. Record the existing gap and channel baseline before replacement, then perform the documented functional checks before returning the machinery to service.
Features:
- Installed probe configuration: 3300 XL 8 mm
- Probe lead length: 1.0 m
- Conduit fittings: Two 3/4-14 NPT fittings and one plug
The 31000-16-10-00-030-02-02 radial proximity probe housing requires appropriate configuration before system integration and commissioning.
REPLACEMENT CHECK
Verify 31000-16-10-00-030-02-02
Identify 31000-16-10-00-030-02-02 by its complete label and order-code options. Compare the probe type, mounting arrangement and connected transducer circuit; a related family number is not proof of interchangeability.
This article includes a 1.0 m probe lead, 0.0-inch standoff adapter option and 3.0-inch probe penetration. Option 02 supplies two 3/4-14 NPT conduit fittings and one plug; the mounting thread is also 3/4-14 NPT. The housing provides mechanical and environmental protection and is not an explosion-proof enclosure.
Inspect 31000-16-10-00-030-02-02 on receipt and retain the inspection record. After installation, verify the measurement baseline and diagnostic condition with the correctly matched transducer components.
Features:
- Installed probe configuration: 3300 XL 8 mm
- Probe lead length: 1.0 m
- Conduit fittings: Two 3/4-14 NPT fittings and one plug
The 31000-16-10-00-030-02-02 radial proximity probe housing requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 31000-16-10-00-030-02-02 radial proximity probe housing must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size24.64 x 9.14 x 7.62 cm
-
Shipping weight1.20 kg (typical bare assembly)
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031900090
-
OriginConfirm against the supplied product label
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 31000-16-10-00-030-02-02
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Is a standoff adapter supplied with the 00 configuration?
No. 31000-16-10-00-030-02-02 selects no standoff adapter. Its 3.0-inch penetration and 3/4-14 NPT mounting arrangement must fit the machine case. -
Which probe is supplied by option 16?
31000-16-10-00-030-02-02 uses the 3300 XL 8 mm probe configuration. Check the installed 8 mm extension cable and Proximitor sensor as a complete matched transducer circuit. -
Can axial position be measured with this radial housing?
The manufacturer recommends 31000-16-10-00-030-02-02 for radial transducers and Keyphasor measurements. For dual-probe axial position arrangements, the housing datasheet directs users to the 21022 family. -
What must be checked before changing a three-inch probe sleeve?
Record the probe gap, penetration and sleeve arrangement of 31000-16-10-00-030-02-02. A sleeve supplied for another penetration or probe type may not retain the required geometry. -
Does the case need to follow bearing movement?
For relative radial vibration with 31000-16-10-00-030-02-02, the manufacturer requires the machine casing to be affixed to the bearing. Review this mounting relationship before accepting a measurement. -
What is the safe sequence for accessing the housed probe?
Follow the 31000-16-10-00-030-02-02 housing procedure: fit the outer sleeve, set the probe gap, disconnect the cable before fitting the housing, secure the retainer, reconnect and close the cover. -
What should an MRO order identify for the no-adapter assembly?
Provide 31000-16-10-00-030-02-02, quantity, existing sleeve and mounting photographs, and the installed 8 mm transducer details. Specify that the order requires no standoff adapter. -
What should be included in the receiving inspection for option 02?
Check that 31000-16-10-00-030-02-02 has two 3/4-14 NPT fittings and one plug, the correct 1.0 m probe lead and an undamaged housing, sleeve, seal and cover.
READY TO VERIFY YOUR PART?
Get a 31000-16-10-00-030-02-02 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
