PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 Ceramic Capped Probe
- 146056-15-10-02-02-05
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Tubed ceramic probe with an installation-completed rear seal
Bently Nevada 146056-15-10-02-02-05 is a ceramic-capped probe with a 1.5-inch threaded case, 1.0 m total length and stainless steel protective tubing. The configuration includes a 1/2-inch NPT exit fitting and a standard miniature ClickLoc coaxial connector.
Unlike front-sealed-only ceramic probe designs, the 146056 assembly provides tubing and a rear fitting for installations requiring protection at both ends. The rear fitting leaves the factory unsealed and must be tightened after mounting and electrical gapping, with the complete measurement system and containment arrangement verified.
Unlike front-sealed-only ceramic probe designs, the 146056 assembly provides tubing and a rear fitting for installations requiring protection at both ends. The rear fitting leaves the factory unsealed and must be tightened after mounting and electrical gapping, with the complete measurement system and containment arrangement verified.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where 146056-15-10-02-02-05 Fits Across Industrial Application Areas
Industrial uses span production and utility equipment, subject to verified product compatibility, installation requirements and operating conditions.
-
01 · PULP & PAPER
Pulp Manufacturing and Paper Production
Pulp refiners and process pumps in integrated pulp mills.Paper machine press rolls and winders in papermaking facilities. -
02 · WATER & WASTEWATER
Municipal Wastewater Collection and Treatment
Sewage lift pumps serving municipal wastewater collection and treatment.Aeration blowers and sludge equipment in wastewater treatment plants. -
03 · POWER GENERATION
Electricity Generation and Power Plant Utilities
Gas and steam turbine generators in thermal power plants.Hydroelectric turbines and generators in conventional hydropower generating stations.
Technical specifications for 146056-15-10-02-02-05
-
Product Model146056-15-10-02-02-05
-
Product ParametersTubed ceramic proximity probe
-
In stock1 unit
-
ManufacturerBently Nevada
-
Mounting thread3/8-24 UNF
-
Case length1.5 in (38.1 mm)
-
Total probe length1.0 m
-
Exit fitting1/2-inch NPT
-
Connector typeStandard miniature coaxial ClickLoc
-
Rear cable protectionStainless steel tubing and rear fitting
-
Probe tip materialAlumina ceramic
-
Probe case materialAISI 304 stainless steel
-
Electrical cable75-ohm FEP-insulated coaxial
-
System linear span1.52 mm under specified system conditions
-
Recommended electrical gap1.0 mm
-
Operating and storage temperature-51 to +177 C
-
Published pressure seal rating34 bar nitrogen; installation sealing required
-
Nominal probe DC resistance7.59 +/-0.50 ohm
-
Approval order option05: multiple approvals; installation conditions apply
View all additional
Alternative Names
1.5-inch tubed ceramic proximity probe
3300 front-and-rear protected probe assembly
1.0 m ceramic sensor with NPT exit
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
3300 CERAMIC CAPPED PROBE
Tubed ceramic probe with an installation-completed rear seal
This 146056 probe uses a ceramic sensing front with stainless steel tubing and a rear fitting. The rear protective route distinguishes it from a 146054 probe and is intended for conditions requiring protection at both ends of the case.
The selected 1.5-inch case, 1.0 m total length, 1/2-inch NPT exit and standard ClickLoc connector must be checked against the mounting and cable-route drawings. The connector option does not specify the removable-nut version.
Use a compatible 3300 Proximitor and extension-cable arrangement, with the ceramic transfer curve and electrical gap verified. After the probe is secured and correctly gapped, the rear fitting must be tightened to complete its seal.
Features:
- Stainless tubing protects the rear route
- Standard ClickLoc and 1/2-inch NPT exit
- Complete the rear seal after gapping
The Bently Nevada 146056-15-10-02-02-05 ceramic proximity probe requires the appropriate mounting, connections and configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Match each 146056 option independently: case length, total probe length, exit fitting, electrical connector and approvals. The two adjacent 02 groups describe different interfaces and must not be collapsed into a single connector specification.
A standard 146054 assembly does not include the same rear fitting and stainless tube, so it is not a confirmed substitute where rear chemical protection is needed. Any change in exit fitting or connector style also requires installation review.
The reviewed manufacturer material does not establish an exact-model end-of-life date or guaranteed replacement code. For a proposed alternative, verify mechanical fit, rear-sealing procedure, process containment, target response and complete system approval conditions.
Features:
- Keep the 1.5-inch case option
- Verify exit fitting separately from connector
- Retain rear protection and sealing procedure
The Bently Nevada 146056-15-10-02-02-05 ceramic proximity probe requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikon-hosted reference packages, not direct manufacturer downloads. Refer to the applicable Bently Nevada documentation and supplied product identity before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the Bently Nevada 146056-15-10-02-02-05 ceramic proximity probe must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 146056-15-10-02-02-05
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is different about the 146056 rear connection?
It has stainless steel tubing and a rear fitting intended to prevent media entering through the back of the case. The fitting is not factory-tightened into its final sealed condition; installation must complete that step. -
What do the two consecutive 02 options mean?
The first 02 specifies the 1/2-inch NPT exit fitting. The next 02 specifies the standard miniature ClickLoc coaxial connector. Their functions are separate and should not be merged in an order check. -
Is this version fitted with a removable connector nut?
No. The published removable-nut ClickLoc option is 03. This model uses connector option 02, identified as the standard miniature ClickLoc connector. -
Should the rear fitting be sealed before setting probe gap?
The manufacturer permits moving the tubing and fittings aside during gapping and mounting. Secure and electrically gap the probe first, then tighten the fittings to complete the rear seal. -
How much thread engagement is allowed for this 3/8-24 probe?
The stated maximum engagement is 0.563 inch for a matching internal thread. Greater engagement can cause binding and requires manufacturer review rather than extra tightening during installation. -
Can a 34 bar rating be used for every process fluid?
No. The published rating is a 34 bar nitrogen sealing statement. Verify the actual fluid, pressure duty, containment and any required seal testing for the application.
READY TO VERIFY YOUR PART?
Get a 146056-15-10-02-02-05 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
