AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL 8mm Proximity Transducer
- 330101-00-16-05-02-00
In Stock
Ships by Sunday, August 16
Fast Shipping Available
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for 330101-00-16-05-02-00
-
Product Model330101-00-16-05-02-00
-
Product Parameters3300 XL 8 mm Proximity Probes
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
In stock1 unit
-
Estimated Shipping Size1.5x1.3x113cm
-
ManufacturerBently Nevada
-
Weight0.05 kg
-
Unthreaded Length Option0.0 in
-
Overall Case Length Option1.6 in
-
Total Length Option0.5 meter (1.6 feet)
-
Connector and Cable-Type OptionMiniature coaxial ClickLocconnector, standard cable
-
Agency Approval OptionNot required
Description
The Bently Nevada 330101-00-16-05-02-00 is a 3300XL 8 mm proximity probe featuring a 3/8-24 UNF thread and without armor as a critical sensing element of the 3300XL 8 mm Proximity Transducer System for machinery condition monitoring applications. The 330101-00-16-05-02-00 provides an output voltage that is directly proportional to the distance between the probe tip and the observed conductive surface, enabling precise measurement of both static (position) and dynamic (vibration) values on fluid-film bearing machines, as well as Keyphasor reference and speed measurements.
The system provides an output voltage that is directly proportional to the distance between the probe tip and the observed conductive surface and can measure both static (position) and dynamic (vibration) values. The system’s primary applications are vibration and position measurements on fluid-film bearing machines, as well as Keyphasor reference and speed measurements.
The 3300 XL 8 mm system delivers the most advanced performance in our eddy current proximity transducer systems. The standard 3300 XL 8 mm 5-meter system also fully complies with the American Petroleum Institute’s (API) 670 Standard for mechanical configuration, linear range, accuracy, and temperature stability. All 3300 XL 8 mm proximity transducer systems provide this level of performance and support complete interchangeability of probes, extension cables, and Proximitor sensors, eliminating the need to match or bench calibrate individual components.
The system provides an output voltage that is directly proportional to the distance between the probe tip and the observed conductive surface and can measure both static (position) and dynamic (vibration) values. The system’s primary applications are vibration and position measurements on fluid-film bearing machines, as well as Keyphasor reference and speed measurements.
The 3300 XL 8 mm system delivers the most advanced performance in our eddy current proximity transducer systems. The standard 3300 XL 8 mm 5-meter system also fully complies with the American Petroleum Institute’s (API) 670 Standard for mechanical configuration, linear range, accuracy, and temperature stability. All 3300 XL 8 mm proximity transducer systems provide this level of performance and support complete interchangeability of probes, extension cables, and Proximitor sensors, eliminating the need to match or bench calibrate individual components.
Information
Overview
Manuals
Application Notes
Product Applications
Probe Insertion Guidelines
Features:
- 3/8-24 UNF Thread Configuration
- Without Armor Construction
- Connector Protector with Standard Cable
- Patented TipLoc Molding Method
The Bently Nevada 330101-00-16-05-02-00 is factory calibrated for use with AISI 4140 steel targets and provides a 2.0 mm (80 mil) linear measurement range when installed with the specified Proximitor Sensor and extension cable. The probe incorporates a PPS sensing tip, a 75 Ω coaxial cable, and a Viton® environmental seal to provide stable performance over a wide operating temperature range. When configured as a complete 3300 XL transducer system, it meets the performance requirements of API 670 for linearity, accuracy, interchangeability, and temperature stability.
The 330101-00-16-05-02-00 Bently Nevada 3300 XL 8 mm Probe, 3/8-24 UNFthread, without armor may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330101-00-16-05-02-00 3300 XL 8 mm Probe, 3/8-24 UNFthread, without armor Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The probe uses eddy current technology to measure shaft vibration, position, and displacement in rotating machinery. The PPS probe tip and AISI 303/304 stainless steel case provide corrosion resistance in industrial environments. The patented TipLoc molding method ensures a robust bond between the probe tip and body. The CableLoc design provides 330 N (75 lbf) pull strength between the probe cable and probe tip.
The 1.6-inch case length provides adequate thread engagement for typical bearing housing mounting bosses. The 0.5-meter total length is the shortest standard cable length in the 3300 XL 8 mm series, suited for installations where the Proximitor sensor mounts immediately adjacent to the probe location with minimal cable run.
- Oil and Gas: Covers upstream extraction, midstream compression, and downstream refining
- Power Generation: Steam, gas, and hydro turbine-generators
- Petrochemical: Large pumps, centrifugal compressors, and electric motors
- Radial Vibration: Monitors dynamic shaft motion in fluid-film journal bearings
- Axial Position (Thrust): Tracks axial shaft displacement to prevent internal rubbing
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Thread Specifications: Mount using the 3/8-24 UNF thread into a matching bracket or machine threaded hole.
Gap Setting: Adjust the physical distance (gap) between the probe tip and the target shaft using a digital voltmeter at the Proximitor sensor. The standard linear operating range centers around a -10 VDC output (approx. 1.27 mm or 50 mils gap).
Torque and Locking: Hand-tighten locknuts securely to prevent shifting during machine operation, ensuring the probe body does not touch surrounding metal walls to avoid false eddy-current readings.
Alternative Names
330101-00-16-05-02-OO
330101-00-16-05-0Z-00
330101-00-16-05-O2-00
330101-00-16-O5-02-00
330101-00-I6-05-02-00
330101-OO-16-05-02-00
33010I-00-16-05-02-00
3301O1-00-16-05-02-00
330I01-00-16-05-02-00
33O101-00-16-05-02-00
330101-00-16-05-02-05
330101-00-16-05-02-CN
330101-00-16-05-02-BR
330101-00-16-05-02-RU
Technical notes
Engineered for reliable operation in demanding industrial environments, the 330101 standard probe operates over a wide temperature range of –52 °C to +177 °C (–62 °F to +350 °F), with the probe sealing material consisting of a Viton® O-ring designed to seal differential pressure between the probe tip and case. The 330101 is fully interchangeable with other 3300XL 8 mm system components and is backward compatible with non-XL 3300 series 5 mm and 8 mm transducer system components, eliminating the need to match or bench calibrate individual components during system maintenance or expansion.
FAQs
-
Can I shorten or lengthen the attached 0.5m cable?
+No. The 3300 XL system is a calibrated unit. Changing the cable length alters the electrical resistance and ruins the signal accuracy. -
How does it sense position without touching?
+It uses the eddy current principle. The sensor sends a radio frequency signal to the probe tip, creating a magnetic field that detects how close the metal target is. -
Can I cut or shorten the probe cable in the field?
+No. The 3300 XL system is a tuned and calibrated unit. Changing the cable length changes the electrical resistance (impedance), which ruins the calibration and gives false readings. -
What is the linear measurement range?
+It has a linear range of 80 mils (2.0 mm). It works best when started from an initial gap of about 50 mils (1.27 mm).
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
-
-
-
-
-
-
-
330101-00-28-90-02-003300 XL 8 mm Probe, 3/8-24 UNFthread, without armorManufacturer: Bently NevadaView Details
-
-
Product
Product Browsing History
-
-
330101-00-16-10-11-003300 XL 8 mm Probe, 3/8-24 UNFthread, without armorManufacturer: Bently NevadaView Details
-
330101-02-70-10-11-053300 XL 8 mm Probe, 3/8-24 UNFthread, without armorManufacturer: Bently NevadaView Details
-
330104-04-09-10-01-053300 XL 8 mm Probe, M10 x 1 thread,with armorManufacturer: Bently NevadaView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
