PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL 8mm Proximity Transducer
- 330102-00-35-10-01-05
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
3300 XL 8 mm armored standard-mount probe, 3.5 in case, 1.0 m total length
Bently Nevada 330102-00-35-10-01-05 is an armored proximity probe for the 3300 XL 8 mm transducer family. Its 3.5-inch case uses an imperial mounting thread, while the one-metre probe assembly incorporates a standard cable and protected ClickLoc termination.
The sensing tip detects changes in distance to a conductive machine surface for the associated Proximitor system. Armor adds the documented cable construction, but does not replace checks of routing, installation temperature, target geometry or the approval requirements of the complete measuring channel.
The sensing tip detects changes in distance to a conductive machine surface for the associated Proximitor system. Armor adds the documented cable construction, but does not replace checks of routing, installation temperature, target geometry or the approval requirements of the complete measuring channel.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Application context for 330102-00-35-10-01-05
These uses are supported by the applicable manufacturer documentation. Series-level guidance does not prove that this complete order was installed in a particular customer project.
-
01 · MACHINERY VIBRATION
Shaft vibration at fluid-film bearings
An appropriately configured proximity system uses the armored probe to detect radial shaft displacement near a fluid-film bearing. The probe installation must preserve the documented target size and spacing needed to control interaction between adjacent channels. -
02 · AXIAL POSITION
Conductive target position monitoring
The probe provides the sensing element for a channel that observes movement of a conductive target. The Proximitor configuration and working gap determine how the system represents static position within its documented linear range. -
03 · PHASE REFERENCE
Rotating shaft reference channels
Bently Nevada identifies Keyphasor reference measurements as a use of the 3300 XL family. The selected target and monitor must suit the reference task; an overspeed protection function requires separate documented application review.
Technical specifications for 330102-00-35-10-01-05
-
Product Model330102-00-35-10-01-05
-
Product ParametersArmored eddy current probe
-
In stock1 unit
-
ManufacturerBently Nevada
-
Mounting thread3/8-24 UNF-2A
-
Unthreaded length0.0 in
-
Overall case length3.5 in
-
Total probe length1.0 m
-
Armor constructionFlexible AISI 302 or 304 stainless steel with FEP jacket
-
Cable construction75 ohm triaxial, FEP insulated
-
Termination assemblyMiniature coaxial ClickLoc with connector protector
-
Probe tip diameter8.0 mm
-
Probe tip materialPolyphenylene sulfide (PPS)
-
Case alloyAISI 303 or 304 stainless steel
-
Operating/storage temperature-52 to +177 deg C; pressure seal may fail prematurely below -34 deg C
-
Nominal DC resistance7.59 +/- 0.50 ohm from center to outer conductor
-
Probe case-to-lead tensile rating330 N maximum rated
-
Approval selection05: CSA, ATEX and IECEx option
View all additional
Alternative Names
330102-00-35-10-01-05 armored probe
3.5-inch case 1 m proximity probe
3300 XL 8 mm armored sensing assembly
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
3300 XL 8 MM PROXIMITY TRANSDUCER
Match the complete probe and measurement channel
This armored probe is the sensing component in the documented 3300 XL 8 mm architecture. A compatible Proximitor sensor and the required extension cable complete the system used for distance, vibration and rotational-reference measurements.
The 3.5-inch case and one-metre total probe length have separate mechanical and electrical meanings. Select the correct overall electrical length, conductive target and mounting arrangement before applying the complete system's published performance values.
Armor is part of the cable construction and does not turn standard cable into FluidLoc or an extended-temperature design. Observe the 3/8-24 engagement limit, connector instructions and actual hazardous-area certification conditions.
Features:
- Armored probe, not a complete transmitter
- Correct total electrical length remains essential
- Standard-cable limits apply despite armor
The Bently Nevada 330102-00-35-10-01-05 proximity probe requires the appropriate mounting, connections and configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
An exact replacement assessment must include the 3.5-inch case, armor, one-metre total length and the protected standard-cable connector. Changing one of these selections can alter mechanical fit or the installed system configuration.
If older non-XL components remain in the channel, the manufacturer's lower non-XL performance limits apply to the mixed system. Confirm the whole measurement chain instead of relying on mating connectors or a common probe diameter.
No exact successor, withdrawal date or specific hardware revision was verified for this full order. Use documented matching and the actual certificate to approve any substitute; do not label a different probe as drop-in without manufacturer support.
Features:
- Preserve armor and all length selections
- Review older components in the measuring channel
- Confirm installation and certificate requirements
The Bently Nevada 330102-00-35-10-01-05 proximity probe requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikon-hosted reference packages, not direct manufacturer downloads. Refer to the applicable Bently Nevada documentation and supplied product identity before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the Bently Nevada 330102-00-35-10-01-05 proximity probe must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330102-00-35-10-01-05
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What distinguishes this 330102 probe from a 330101?
The official ordering table identifies 330102 as the armored 3/8-24 UNF probe and 330101 as the unarmored version. Other order fields still need individual matching; the base-number change is not an unconditional replacement rule. -
Does the 35 option describe 35 millimetres?
No. Imperial case length is ordered in 0.1-inch increments, so 35 means 3.5 inches. The separate 10 total-length option means one metre and uses a different unit. -
Does the armor make this a FluidLoc configuration?
No. Armor and cable sealing options are different. This order uses standard cable under option 01; FluidLoc cable is separately selected with options 11 or 12. -
What should be checked where the probe passes through a threaded support?
Confirm the 3/8-24 thread fit and limit engagement to 0.563 inch unless Bently Nevada authorizes the application. Excessive engagement can bind the case even though the overall case is 3.5 inches long. -
Can the probe be operated at 218 degrees Celsius?
That is an extended-temperature-range probe rating, not the standard 330102 rating. The standard probe's operating and storage range is -52 to +177 degrees Celsius, with an additional pressure-seal warning below -34 degrees Celsius. -
Will mixed XL and older 3300 components retain XL accuracy?
No. The datasheet allows stated XL/non-XL component interchangeability but limits a mixed system to the non-XL 3300 5 mm and 8 mm system performance specifications. -
Is the published sensitivity a property of the probe by itself?
No. Scale factor and linearity are specified for the configured 3300 XL probe, extension cable and Proximitor sensor under documented target, gap and supply conditions. They are not standalone probe transmitter ratings.
READY TO VERIFY YOUR PART?
Get a 330102-00-35-10-01-05 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
