PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL 8mm Proximity Transducer
- 330102-00-40-05-01-05
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
330102-00-40-05-01-05 product overview
Bently Nevada 330102-00-40-05-01-05 is a configured 3300 XL 8 mm proximity probe for noncontact shaft-vibration and position measurement. The order code identifies the probe length, connector and approval option for the installed monitoring channel.
Confirm the probe thread, electrical length, connector, approvals and matched extension cable before ordering. Follow the applicable installation procedure and verify channel response after commissioning.
Confirm the probe thread, electrical length, connector, approvals and matched extension cable before ordering. Follow the applicable installation procedure and verify channel response after commissioning.
BEFORE YOU BUY
Check the complete 330102-00-40-05-01-05 order and installed system
ACTUAL APPLICATIONS
Where 330102-00-40-05-01-05 Fits Across Industrial Application Areas
Industrial uses span production and utility equipment, subject to verified product compatibility, installation requirements and operating conditions.
-
01 · OIL & GAS
Oil Production, Gas Processing and Petroleum Refining
Turbines and compressors serving liquefied natural gas production facilities.Refinery compressors and process pumps serving downstream petroleum production. -
02 · MINING & MINERALS
Mining Operations and Mineral Processing
Ore crushers and grinding mills at mineral processing plants.Process pumps and conveyors serving mineral processing plant operations. -
03 · METALS & MINING
Steel Production and Metallurgical Plant Utility Equipment
Rolling mills and extraction fans in steel production plants.Coke oven compressors and combustion blowers serving steel plants.
Technical specifications for 330102-00-40-05-01-05
-
Product Model330102-00-40-05-01-05
-
Product ParametersArmored proximity probe
-
In stock1 unit
-
ManufacturerBently Nevada
-
Mounting ConfigurationStandard mount with armor
-
Case Thread3/8-24 UNF-2A
-
Unthreaded Length Option00: 0.0 inch
-
Overall Case Length Option40: 4.0 inches
-
Total Length Option05: 0.5 metre (1.6 feet)
-
Connector and Cable Option01: ClickLoc connector with protector, standard cable
-
Agency Approval Option05: CSA, ATEX and IECEx approvals
-
Probe Tip Diameter8.0 mm
-
Nominal Scale Factor7.87 V/mm (200 mV/mil)
-
Linear Range2.0 mm (80 mil)
View all additional
Alternative Names
330102-00-40-05-01-05
3300 XL 8 mm armored probe
4-inch ClickLoc proximity probe
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
3300 XL 8 MM ARMORED PROBE
Match the armored probe to the complete 5 m system
Bently Nevada 330102-00-40-05-01-05 is a 3300 XL 8 mm proximity probe with a 3/8-24 UNF thread and armor. The full suffix identifies the unthreaded length, case length, integral cable, connector arrangement and approvals.
The probe is one element of a calibrated proximity transducer system. Its probe and extension-cable lengths must add to the Proximitor Sensor electrical length, and the installed target and gap must meet the system documentation.
Check the armor route, connector condition, case dimensions and mounting clearance before installation. A similar 8 mm probe with a different suffix can change the mechanical fit or complete system length.
Features:
- Complete armored probe: 330102-00-40-05-01-05
- 3/8-24 UNF probe with armored lead
- Verify case, cable and approval suffixes
The Bently Nevada 330102-00-40-05-01-05 3300 XL 8 mm armored proximity probe requires the complete probe suffix, armored lead, mechanical dimensions, system electrical length and agency approval to be checked before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Bently Nevada 330102-00-40-05-01-05 must be replaced only with a unit matching the complete probe suffix, armored lead, mechanical dimensions, system electrical length and agency approval. A similar family name does not establish interchangeability.
Record the installed label, mounting arrangement, wiring or cable details, connected monitor and approval requirements before removing the existing 3300 XL 8 mm armored proximity probe.
Verify the manufacturer documentation for the proposed replacement and recheck the installed gap, mounting, wiring and monitor configuration before commissioning.
Features:
- Match the complete model and suffix
- Check mounting, cable and monitor interfaces
- Revalidate wiring and measurement configuration
The Bently Nevada 330102-00-40-05-01-05 3300 XL 8 mm armored proximity probe requires replacement verification of the complete identifier, mounting, wiring, connected system and approval requirements before commissioning.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The documents below provide applicable technical information for the Bently Nevada 330102-00-40-05-01-05 3300 XL 8 mm armored proximity probe. Confirm the supplied item and document availability in the written quotation.
Features:
- Available Bently Nevada document references are confirmed before order
- Match the complete model suffix and installed system
- Accessories are supplied only when listed in the quotation
Documentation for the Bently Nevada 330102-00-40-05-01-05 3300 XL 8 mm armored proximity probe must be matched to the complete identifier and installed system; confirm manual availability in the written quotation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizeConfirm in written quote
-
Shipping weightConfirm before dispatch
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330102-00-40-05-01-05
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What does the 00 unthreaded-length code mean?
It specifies 0.0 inch of unthreaded length. Compare the complete mounting geometry before replacing an installed probe. -
What case length is selected by code 40?
Code 40 specifies a 4.0-inch overall case length for this standard-mount probe. -
What does total-length option 05 specify?
It specifies a total probe length of 0.5 metre (1.6 feet). Match it to the intended 3300 XL 8 mm system configuration. -
Which connection is supplied by option 01?
Option 01 provides a miniature coaxial ClickLoc connector with connector protector and standard cable. -
Which approvals correspond to the final 05?
The official ordering table identifies CSA, ATEX and IECEx approvals. Verify the received nameplate for the intended installation. -
Can this replace a non-armored or reverse-mount probe?
Not by family name alone. Confirm the complete model, armor, mounting style, thread, case length, total length, connector and approvals. -
What should be checked before installing this probe?
Inspect the 8 mm tip, armor, 3/8-24 UNF thread, cable, ClickLoc connector and complete order marking before disturbing the installed probe. -
How should the channel be validated after installation?
Set the operating gap, confirm stable gap voltage, verify monitor scaling and channel response, and validate the intended vibration or position measurement.
READY TO VERIFY YOUR PART?
Get a 330102-00-40-05-01-05 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
