AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL 8mm Proximity Transducer
- 330105-xx-xx-10-02-05 mod：157310-09
In Stock
Ships by Sunday, July 19
Fast Shipping Available
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for 330105-xx-xx-10-02-05 mod：157310-09
-
Product Model330105-xx-xx-10-02-05 mod：157310-09
-
Product Parameters3300 XL 8 mm Reverse Mount Probes
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
In stock1 unit
-
Estimated Shipping Size1.2x1x115cm
-
ManufacturerBently Nevada
-
Weight0.05 kg
-
Total Length Option1.0 meter (3.3 feet)
-
Connector and Cable-Type OptionMiniature ClickLoc coaxialconnector
-
Agency Approval OptionCSA, ATEX, IECEx Approvals
-
Probe Cable75 Ω triaxial
-
Recommended Gap Setting1.27 mm (50 mils)
Description
The Bently Nevada 330105-xx-xx-10-02-05 is a 3300XL 8mm Reverse Mount Proximity Probe with 3/8-24 UNF thread and without armor, designed as a core component of the 3300XL 8mm Proximity Transducer System. The 330105-xx-xx-10-02-05 provides an output voltage that is directly proportional to the distance between the probe tip and the observed conductive surface, and can measure both static (position) and dynamic (vibration) values. The primary applications of the 330105 include vibration and position measurements on fluid-film bearing machines where reverse mounting is required due to space constraints, as well as Keyphasor reference and speed measurement.
The 330105-xx-xx-10-02-05 incorporates a patented TipLoc molding method that provides a more robust bond between the probe tip and the probe body, enhancing mechanical durability in demanding industrial environments. The probe cable of the 330105 incorporates a patented CableLoc design that provides 330N (75 lbf) pull strength to more securely attach the probe cable and probe body, ensuring reliable connection integrity during installation and operation.
The 330105-xx-xx-10-02-05 incorporates a patented TipLoc molding method that provides a more robust bond between the probe tip and the probe body, enhancing mechanical durability in demanding industrial environments. The probe cable of the 330105 incorporates a patented CableLoc design that provides 330N (75 lbf) pull strength to more securely attach the probe cable and probe body, ensuring reliable connection integrity during installation and operation.
Alternative Names
330105-xx-xx-10-02-05 mod：157310-O9
330105-xx-xx-10-02-05 mod：1573IO-09
330105-xx-xx-10-02-05 mod：I57310-09
330105-xx-xx-10-02-O5 mod：157310-09
330105-xx-xx-10-O2-05 mod：157310-09
330105-xx-xx-10-0Z-05 mod：157310-09
330105-xx-xx-1O-02-05 mod：157310-09
330105-xx-xx-I0-02-05 mod：157310-09
3301O5-xx-xx-10-02-05 mod：157310-09
330I05-xx-xx-10-02-05 mod：157310-09
33O105-xx-xx-10-02-05 mod：157310-09
330105-xx-xx-10-02-05 mod 157310-09
330105-xx-xx-10-02-05 mod 157310-O9
330105-xx-xx-10-02-05 mod 1573IO-09
330105-xx-xx-10-02-05 mod I57310-09
330105-xx-xx-10-02-O5 mod 157310-09
330105-xx-xx-10-OZ-05 mod 157310-09
330105-xx-xx-IO-02-05 mod 157310-09
3301O5-xx-xx-10-02-05 mod 157310-09
330I05-xx-xx-10-02-05 mod 157310-09
33O105-xx-xx-10-02-05 mod 157310-09
Information
Overview
Manuals
Application Notes
Product Applications
Probe Insertion
Features:
- 3/8-24 UNF Thread Reverse Mount Probe Without Armor
- Patented TipLoc Molding for Robust Probe Tip Bond
- Patented CableLoc Design with 330N (75 lbf) Pull Strength
- Corrosion-Resistant Gold-Plated ClickLoc Connectors
- Wide Operating Temperature Range (-52°C to +177°C)
The 330105-xx-xx-10-02-05 mod：157310-09 features a 20 mm unthreaded length and a 120 mm overall case length. The total probe cable length on the 330105-02-12-10-02-05 (mod: 157310-09) is 1.0 meter, terminating in a miniature coaxial ClickLoc connector with standard FEP-insulated cable. The probe tip of the330105-xx-xx-10-02-05 (mod: 157310-09) is made of polyphenylene sulfide (PPS), and the probe case is constructed from AISI 303 or 304 stainless steel.
The 330105-xx-xx-10-02-05 Bently Nevada 3300 XL 8 mm Reverse Mount Probes may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330105-02-12-10-02-05 3300 XL 8 mm Reverse Mount Probes Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The 330105-xx-xx-10-02-05 (mod: 157310-09) delivers a linear range of 2 mm (80 mils), beginning at approximately 0.25 mm from the target surface. The incremental scale factor of the 330105-xx-xx-10-02-05 (mod: 157310-09) is 7.87 V/mm (200 mV/mil) ±5% typical, including interchangeability error when measured in increments of 0.25 mm over the linear range. The deviation from the best fit straight line is less than ±0.025 mm (±1 mil) typical. Over the probe temperature range of –51°C to +177°C, the incremental scale factor remains within ±10% of 7.87 V/mm, and the deviation from the best fit straight line remains within ±0.076 mm (±3 mils).
The standard 3300 XL 8 mm system including the 330105-xx-xx-10-02-05 (mod: 157310-09) is 100% compliant with the American Petroleum Institute's (API) 670 Standard (4th Edition) for mechanical configuration, linear range, accuracy, and temperature stability. All 3300 XL 8 mm proximity transducer systems achieve this level of performance while allowing complete interchangeability of probe, extension cable, and Proximitor Sensor without the need for individual component matching or bench calibration. The 330105-02-12-10-02-05 (mod: 157310-09) is backward compatible and interchangeable with other non-XL 3300 series 5 mm and 8 mm transducer system components.
- Steam/Gas Turbines: Monitors radial vibration and axial thrust in fluid-film bearings
- Generators: Tracks thermal expansion and shaft dynamics to prevent rotor-stator rubbing
- Hydro Turbines: Measures alignment, runout, and structural vibration of main shaft
- Centrifugal Compressors: Continuously tracks shaft vibration to prevent catastrophic failure
- Turboexpanders: Measures high-speed rotor stability and provides speed/overspeed data
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Target Material: The system is factory-calibrated for AISI 4140 steel. Calibration changes are required for other materials.
Gap Distance: The typical recommended operating gap is 1.27 mm (50 mils), centered within a linear range of 0.25 mm to 2.3 mm (10 to 90 mils).
Insertion & Adjustment: Thread the probe into the machine casing or mounting bracket. Use a feeler gauge between the probe tip and the shaft to set the exact gap, then tighten the locknut to secure its position
Technical notes
The 330105 operates over a standard temperature range of -52°C to +177°C (-62°F to +350°F). For applications in which the probe lead may exceed the standard 177°C (350°F) temperature specification, an Extended Temperature Range (ETR) probe option is available with an extended temperature rating up to 218°C (425°F) at the probe tip. The 330105 is designed to seal differential pressure between the probe tip and case using a Viton® O ring sealing material.
FAQs
-
What is the 330105-xx-xx-10-02-05 ?
+The Bently Nevada 330105-xx-xx-10-02-05 belongs to the 3300 XL 8 mm Reverse Mount Probe series -
What is the primary purpose of this probe?
+It is used in industrial monitoring to measure radial vibration, axial position, and to provide Keyphasor reference and speed measurements for rotating machinery. -
What is the standard gap distance for installation?
+The probe should be gapped at the center of its linear operating range (typically around 1.27 mm or 50 mils from the target). -
Can I replace just the probe if the cable is damaged?
+No, 3300 XL series probes and extension cables are a matched set. They are calibrated together, and changing only the probe or only the cable will alter the system's scale factor and measurement accuracy.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
Product
Product Browsing History
-
330105-xx-xx-10-02-05 mod：157310-093300 XL 8 mm Reverse Mount ProbesManufacturer: Bently NevadaView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- ADDRESS
-
32D UNITS,GUOMAO BUILDING,NO 388 HUBIN SOUTH ROAD,SIMING DISTRICT,XIAMEN