AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL 8mm Proximity Transducer
- 330101-00-18-10-02-CN
In Stock
Ships by Wednesday, July 8
Fast Shipping Available
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for 330101-00-18-10-02-CN
-
Product Model330101-00-18-10-02-CN
-
Product Parameters3300 XL 8 mm Probe, 3/8-24 UNFthread, without armor
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
In stock1 unit
-
Estimated Shipping Size1.5x1.3x116cm
-
ManufacturerBently Nevada
-
Weight0.05 kg
-
Unthreaded Length Option0.0 in
-
Overall Case Length Option1.8 in
-
Total Length Option1.0 meter (3.3 feet)
-
Connector and Cable-Type OptionMiniature coaxial ClickLocconnector, standard cable
-
Agency Approval OptionCSA, ATEX, IECEx Approvals
Description
The Bently Nevada 330101-00-18-10-02-CN is a 3300XL 8mm Proximity Probe with 3/8-24 UNF thread and without armor, designed as an integral component of the 3300XL 8mm Proximity Transducer System. The 330101-00-18-10-02-CN is primarily used for vibration and position measurements on fluid-film bearing machines, as well as Keyphasor reference and speed measurements.
The Bently Nevada 330101-00-18-10-02-CN features a 3/8-24 UNF thread configuration and is supplied without armor. The 330101-00-18-10-02-CN has a 1.8-inch unthreaded length and a 10.0-inch overall case length, providing specific mounting dimensions for applications requiring extended probe body penetration. The unthreaded length of the 330101-00-18-10-02-CN must be at least 0.8 inches less than the case length, as specified in the ordering information.
The Bently Nevada 330101-00-18-10-02-CN features a 3/8-24 UNF thread configuration and is supplied without armor. The 330101-00-18-10-02-CN has a 1.8-inch unthreaded length and a 10.0-inch overall case length, providing specific mounting dimensions for applications requiring extended probe body penetration. The unthreaded length of the 330101-00-18-10-02-CN must be at least 0.8 inches less than the case length, as specified in the ordering information.
Alternative Names
330101-00-18-10-O2-CN
330101-00-18-1O-02-CN
330101-00-18-I0-02-CN
330101-00-I8-10-02-CN
330101-0O-18-10-02-CN
33010I-00-18-10-02-CN
3301O1-00-18-10-02-CN
330I01-00-18-10-02-CN
330101 00 18 10 02 CN
330101 00 18 10 O2 CN
330101 00 18 1O 02 CN
330101 00 18 I0 02 CN
330101 00 I8 10 02 CN
330101 0O 18 10 02 CN
33010I 00 18 10 02 CN
330101-00-18-10-02-00
330101-00-18-10-02-05
Information
Overview
Manuals
Application Notes
Product Applications
Cable Connection
Features:
- 3/8-24 UNF Thread Without Armor
- 1.8-inch Unthreaded Length with 10.0-inch Overall Case Length
- Miniature Coaxial ClickLoc Connector with Connector Protector
- Multiple Agency Approvals (CSA, ATEX, IECEx)
The probe operates as the sensing element of the 3300 XL 8 mm eddy current transducer system, detecting the distance between the probe tip and a conductive target surface through electromagnetic induction. The 8.0 mm probe tip diameter provides a linear measurement range of 2.0 mm (80 mils) with a standard gap setpoint of 1.0 mm (40 mils). System sensitivity is 7.87 V/mm (200 mV/mil) with ±5% tolerance, delivering an output voltage of -10 VDC to -24 VDC proportional to the probe-to-target gap.
The 330101-00-18-10-02-CN Bently Nevada 3300 XL 8 mm Probe, 3/8-24 UNFthread, without armor may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330101-00-18-10-02-CN 3300 XL 8 mm Probe, 3/8-24 UNFthread, without armor Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The probe tip is constructed from Polyphenylene Sulfide (PPS), a high-temperature thermoplastic resistant to chemicals and mechanical wear. The probe body is manufactured from AISI 303 stainless steel for corrosion resistance. The cable connector employs Bently Nevada's ClickLoc™ locking mechanism to prevent accidental disconnection under vibration.
The 330101-00-18-10-02-CN is calibrated for AISI 4140 steel targets with a minimum target diameter of 15 mm (0.59 in). Interchangeability error is maintained within ±5% without field recalibration when used with matched 3300 XL system components. The probe achieves a typical resolution of 0.1 µm (4 µin) and a frequency response of 0 to 10 kHz (-3 dB).
- Oil & Gas: Real-time monitoring of centrifugal compressors, gas pipelines, and pumps
- Power Generation: Tracks turbine thrust bearing wear, eccentricity, and rotor vibration
- Chemical Processing: Monitors reactor drives and critical pumps to prevent unplanned downtime
- Metallurgy/Mining: Monitors heavy-duty rolling mills
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Tool Requirements: No special wrenches or tools are needed. Connectors are designed to be connected finger-tight.
Connection Method: Push the mating ends together and twist slightly until the connector locks into place. You will feel or hear a distinct "click," which verifies the connection is secure.
Protection: Ensure the connections are protected from moisture and industrial contaminants.
Technical notes
The Bently Nevada 330101-00-18-10-02-CN features a 1.0 metre (3.3 feet) total cable length, suitable for installations where the probe is located close to the monitoring equipment. The 330101-00-18-10-02-CN includes a miniature coaxial ClickLoc connector with connector protector already installed, providing corrosion-resistant, gold-plated brass connections that require only finger-tight torque and include a specially engineered locking mechanism to prevent loosening.
FAQs
-
What is the 330101-00-18-10-02-CN?
+The Bently Nevada 330101-00-18-10-02-CN is a 3300 XL 8 mm Proximity Probe used for real-time monitoring of vibration and position in rotating machinery, such as turbines and compressors -
Does this probe require an extension cable?
+No, not usually. Because the total length option is configured to "10" (1.0 metre), this probe is designed to connect directly to the monitoring system Proximitor without requiring an additional extension cable. -
What is the recommended gap voltage for radial vibration measurement?
+The recommended gap setting is -9 Vdc, which corresponds to a physical gap of approximately 1.27 mm (50 mils) from the observed conductive target. -
What is the standard measurement range of this sensor?
+It provides a linear range of 2 mm (80 mils), extending from 0.25 mm to 2.3 mm (10 to 90 mils) away from the target surface.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
Product
Product Browsing History
-
330101-00-18-10-02-CN3300 XL 8 mm Probe, 3/8-24 UNFthread, without armorManufacturer: Bently NevadaView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- ADDRESS
-
32D UNITS,GUOMAO BUILDING,NO 388 HUBIN SOUTH ROAD,SIMING DISTRICT,XIAMEN