PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3500 System
- 3500/22M-01-01-R0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Transient data interface module
Bently Nevada 3500/22M-01-01-R0 is a transient data interface. The TDI connects the 3500 machinery protection rack to compatible condition-monitoring software. It collects static data continuously and can support enabled dynamic data capture from M-series monitors. It provides rack-level functions without forming part of the critical machinery-protection decision path.
Match the complete TDI order, front assembly, Ethernet I/O type and supported monitor versions before replacement. The current spare-parts table identifies 288055-01 as the main module. Document revisions and unidentified suffixes do not establish the hardware revision of an installed unit.
Match the complete TDI order, front assembly, Ethernet I/O type and supported monitor versions before replacement. The current spare-parts table identifies 288055-01 as the main module. Document revisions and unidentified suffixes do not establish the hardware revision of an installed unit.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Applications for 3500 machinery monitoring system
These applications describe manufacturer-documented family use. They do not establish that this exact ordering code was installed at a named customer site.
-
01 · CONDITION MONITORING
Rack data communication
The TDI links a 3500 protection rack to compatible System 1 condition-monitoring software. The selected Ethernet I/O carries this network connection; it does not replace measurement-channel hardware. -
02 · TRANSIENT CAPTURE
Enabled machine data collection
The manufacturer documents static data collection and optional dynamic capture from compatible M-series monitors. Dynamic functionality requires the applicable enabling option, not merely a connected network cable. -
03 · RACK UPGRADES
RIM-to-TDI maintenance
A documented upgrade replaces both the RIM and its I/O with compatible TDI assemblies. Keeping the old I/O is specifically prohibited because it can damage the new TDI.
Technical specifications for 3500/22M-01-01-R0
-
Product Model3500/22M-01-01-R0
-
Product ParametersTransient data interface module
-
In stock9 units
-
ManufacturerBently Nevada
-
Rack locationSlot 1 adjacent to power supplies
-
Primary interface3500 protection system to System 1 monitoring software
-
Static data collectionContinuous; standard capability
-
Dynamic data capabilityRequires optional Channel Enabling Disk
-
Compatible monitor type3500 M-series monitors; verify module compatibility
-
Typical power consumption10.5 W
-
Keyphasor input capacityFour channels
-
Maximum speed, 1-16 channels100000 rpm
-
Maximum speed, 17-24 channels60000 rpm
-
Maximum speed, 25-48 channels30000 rpm
-
Minimum supported speed1 rpm
-
Rack address range127 unique addresses
-
Operating temperature-30 to +65 deg C
-
Storage temperature-40 to +85 deg C
View all additional
Alternative Names
3500/22M-01-01-R0 transient data interface
Bently Nevada 3500/22M-01-01-R0
3500/22M 01 01 R0 transient data interface
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
TRANSIENT DATA INTERFACE MODULE
Integrating 3500/22M-01-01-R0
The TDI connects the 3500 machinery protection rack to compatible condition-monitoring software. It collects static data continuously and can support enabled dynamic data capture from M-series monitors. It provides rack-level functions without forming part of the critical machinery-protection decision path.
Select the documented TDI and matching copper or fiber Ethernet I/O. Replacing a RIM requires replacing its I/O as well: the manufacturer warns that inserting a TDI against a RIM I/O can damage the TDI. Verify older monitor compatibility before an upgrade.
Use the slot beside the power supplies and the correctly matched rear I/O. Follow the manufacturer sequence when replacing a RIM, including removing its I/O before installing the new assemblies. Confirm grounding, network medium and the applicable installation manual before commissioning.
Features:
- Match complete spare-part identity, module generation, rack position and mating input/output assembly
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 3500/22M-01-01-R0 transient data interface requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 3500/22M-01-01-R0 requires comparing complete spare-part identity, module generation, rack position and mating input/output assembly. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
Select the documented TDI and matching copper or fiber Ethernet I/O. Replacing a RIM requires replacing its I/O as well: the manufacturer warns that inserting a TDI against a RIM I/O can damage the TDI. Verify older monitor compatibility before an upgrade.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 3500/22M-01-01-R0 transient data interface requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: No verified product PDF is currently available on this page. Amikong-hosted reference documents will be listed only after their product identity and scope have been checked. Consult the applicable manufacturer instructions before use; additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 3500/22M-01-01-R0 transient data interface must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size2.6x25.8x24cm
-
Shipping weight0.8 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031900090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 3500/22M-01-01-R0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How is the exact replacement identified?
Match the complete TDI order, front assembly, Ethernet I/O type and supported monitor versions before replacement. The current spare-parts table identifies 288055-01 as the main module. Document revisions and unidentified suffixes do not establish the hardware revision of an installed unit. -
What is the function of this component?
The TDI connects the 3500 machinery protection rack to compatible condition-monitoring software. It collects static data continuously and can support enabled dynamic data capture from M-series monitors. It provides rack-level functions without forming part of the critical machinery-protection decision path. -
Which installed components must be compatible?
Select the documented TDI and matching copper or fiber Ethernet I/O. Replacing a RIM requires replacing its I/O as well: the manufacturer warns that inserting a TDI against a RIM I/O can damage the TDI. Verify older monitor compatibility before an upgrade. -
Where is this component used?
The TDI links a 3500 protection rack to compatible System 1 condition-monitoring software. The selected Ethernet I/O carries this network connection; it does not replace measurement-channel hardware. -
What must be checked during installation?
Use the slot beside the power supplies and the correctly matched rear I/O. Follow the manufacturer sequence when replacing a RIM, including removing its I/O before installing the new assemblies. Confirm grounding, network medium and the applicable installation manual before commissioning. -
Can the TDI use an existing RIM I/O module?
No. The manufacturer explicitly warns that this can damage the TDI. Both front and rear assemblies must follow the documented conversion sequence. -
Does the TDI itself make machinery-protection trips?
The manufacturer states that the TDI is not part of the critical monitoring path and does not affect the proper normal protection function. Measurement and protection decisions belong to the configured monitoring system.
READY TO VERIFY YOUR PART?
Get a 3500/22M-01-01-R0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
