PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
74712-06-12-04-04 9200 and 74712 Seismoprobe Velocity Transducers
Bently Nevada 74712-06-12-04-04 is a high-temperature 74712 Seismoprobe velocity transducer. The documented configuration uses a 0 degree orientation with a ±100 degree operating angle and 10 Hz minimum frequency, an isolated 1/2-20 UNF mounting base, a side-mount connector arrangement, an anodized aluminum A204 case, and ATEX and IECEx approvals.
BEFORE YOU BUY
Confirm the complete 9200 and 74712 Seismoprobe Velocity Transducers
ACTUAL APPLICATIONS
Application context for 74712-06-12-04-04
Official manufacturer documentation supports these equipment-level uses when the complete 9200 and 74712 Seismoprobe velocity transducers configuration is matched.
-
01 · MARINE & OFFSHORE
Propulsion shafts and auxiliary compressor trains
Marine machinery monitoringPropulsion bearing vibration measurementAuxiliary compressor shaft position tracking -
02 · GENERAL MANUFACTURING
Test stands and high-speed machine spindles
Production asset monitoringSpindle bearing vibration measurementDrive-train shaft position verification -
03 · POWER GENERATION
Turbine and generator bearing measurement points
Rotating equipment monitoringSteam turbine shaft vibration sensingGenerator thrust position measurement
Technical specifications for 74712-06-12-04-04
-
Product Model74712-06-12-04-04
-
Product Parameters9200 and 74712 Seismoprobe Velocity Transducers
-
In stock1 unit
-
ManufacturerBently Nevada
-
Mounting Orientation0 deg +/-100 deg; 10 Hz minimum
-
Mounting BaseIsolated 1/2-20 UNF
-
Connector ArrangementSide mount
-
Agency ApprovalATEX / IECEx
-
Case MaterialAnodized aluminum A204
-
Height102 mm typical
-
Diameter41 mm typical
-
Typical Weight480 g
-
Mounting EnvironmentProtected enclosure
-
Wiring ProtectionConduit recommended
-
Temperature Class-29 to +204 deg C
-
Gasket MaterialSilicone
View all additional
Alternative Names
74712 06 12 04 04
Bently Nevada high-temperature Seismoprobe transducer
9200 and 74712 Seismoprobe velocity transducers high-temperature Seismoprobe transducer
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 74712-06-12-04-04 to the installed 9200 and 74712 Seismoprobe velocity transducers
Bently Nevada 74712-06-12-04-04 is a high-temperature Seismoprobe transducer for the 9200 and 74712 Seismoprobe velocity transducers. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare agency approval (ATEX / IECEx), case material (Anodized aluminum A204) and height (102 mm typical) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 74712-06-12-04-04
- Product class: high-temperature Seismoprobe transducer
- Family: 9200 and 74712 Seismoprobe velocity transducers
The Bently Nevada 74712-06-12-04-04 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 74712-06-12-04-04 identity before exchange
Replace 74712-06-12-04-04 only after matching the complete article code, high-temperature Seismoprobe transducer, installed 9200 and 74712 Seismoprobe velocity transducers role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 74712-06-12-04-04
- Product class: high-temperature Seismoprobe transducer
- Family check: 9200 and 74712 Seismoprobe velocity transducers
The Bently Nevada 74712-06-12-04-04 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Official CA-H200C product references are checked before order
- Confirm camera and controller compatibility in current manuals
- Accessories are supplied only when listed in the quotation
Documentation for the KEYENCE CA-H200C cable must be matched to the connected camera and controller; confirm manual availability in the written quotation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size4.1 x 4.1 x 10.2 cm
-
Shipping weight0.48 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031900090
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 74712-06-12-04-04
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Will 74712-06-12-04-04 geometry 06-12-04-04 fit the bracket?
For 74712-06-12-04-04 configuration 06-12-04-04, measure the bracket and target clearance; confirm connector arrangement Side mount and agency approval ATEX / IECEx. -
Can 74712-06-12-04-04 lead 06-12-04-04 reach the monitor?
Route 74712-06-12-04-04 configuration 06-12-04-04 with bend allowance and connector access, then confirm the documented case material value Anodized aluminum A204. -
Which interface matches 74712-06-12-04-04 build 06-12-04-04?
Match 74712-06-12-04-04 build 06-12-04-04 by mounting orientation 0 deg +/-100 deg; 10 Hz minimum, signal chain, mounting hardware and configured channel. -
What should receiving inspect on 74712-06-12-04-04 option 06-12-04-04?
Inspect 74712-06-12-04-04 option 06-12-04-04, height 102 mm typical, cable or housing condition, connector surfaces and supplied protection. -
How is 74712-06-12-04-04 specification 06-12-04-04 commissioned?
Commission 74712-06-12-04-04 specification 06-12-04-04 with the approved measurement chain and verify diameter 41 mm typical before restoring alarms. -
Can another unit replace 74712-06-12-04-04 configuration 06-12-04-04?
Do not assume replacement for 74712-06-12-04-04 configuration 06-12-04-04; compare Side mount, ATEX / IECEx, Anodized aluminum A204, approvals and every order-code field. -
What quotation data identifies 74712-06-12-04-04 build 06-12-04-04?
Quote 74712-06-12-04-04 build 06-12-04-04 with quantity, nameplate photos, installed system, destination, mounting orientation 0 deg +/-100 deg; 10 Hz minimum and case material Anodized aluminum A204. -
Which record accepts 74712-06-12-04-04 value set 06-12-04-04?
For 74712-06-12-04-04 value set 06-12-04-04, retain inspection, connection records, controlled tests and proof that typical weight 480 g matches.
READY TO VERIFY YOUR PART?
Get a 74712-06-12-04-04 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
74712-06-12-04-049200 and 74712 Seismoprobe Velocity TransducersManufacturer: Bently NevadaView Details
-
9200-03-02-02-009200 and 74712 Seismoprobe Velocity TransducersManufacturer: Bently NevadaView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
