PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Two-wire moving-coil Seismoprobe velocity transducer
Bently Nevada 9200-01-05-10-00 is a self-powered Seismoprobe velocity transducer for absolute vibration measurements on bearing housings, casings and structures. Its moving-coil sensing element provides a voltage proportional to vibration velocity, with the selected orientation supporting a 4.5 Hz minimum operating frequency.
This configuration has a top-mounted terminal block without an integral cable, a circular M10x1 mounting base and no agency approvals. Correct mounting angle, a suitable measurement channel and protected field wiring are essential to preserve the specified sensitivity and frequency response during continuous or periodic monitoring.
This configuration has a top-mounted terminal block without an integral cable, a circular M10x1 mounting base and no agency approvals. Correct mounting angle, a suitable measurement channel and protected field wiring are essential to preserve the specified sensitivity and frequency response during continuous or periodic monitoring.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Application context for 9200-01-05-10-00
These uses are supported by the applicable manufacturer documentation. Series-level guidance does not prove that this complete order was installed in a particular customer project.
-
01 · Bearing monitoring
Continuous bearing-housing vibration measurement on rotating machines
The moving-coil transducer measures absolute bearing-housing motion. The mounting point must transmit representative rotor vibration for a useful protection measurement. -
02 · Portable diagnostics
Periodic machine-casing vibration checks using diagnostic instruments
Its self-powered output supports periodic measurements without an external sensor power supply. The instrument load and selected mounting orientation still require verification. -
03 · Structural vibration
Absolute vibration measurements at suitable structural mounting points
The sensor measures motion of its supporting structure rather than shaft-relative displacement. Use the orientation and frequency limits of this particular ordering option.
Technical specifications for 9200-01-05-10-00
-
Product Model9200-01-05-10-00
-
Product ParametersMoving-coil velocity vibration transducer
-
In stock1 unit
-
ManufacturerBently Nevada
-
Sensing principleSelf-powered, two-wire moving coil
-
Mounting orientation0 degrees +/-2.5 degrees, option 01
-
Frequency response4.5 to 1000 Hz, +0/-3 dB typical
-
Connection arrangementTop terminal block; no cable
-
Mounting baseCircular M10x1 stud
-
Approval optionNo approvals, option 00
-
Sensitivity20 mV/(mm/s), +/-5%, at specified calibration orientation and load
-
Calibration load10 kilohms between A and B
-
Coil resistance1.25 kilohms +/-5%
-
Locked coil inductance125 mH typical
-
Maximum dynamic displacement2.54 mm peak-to-peak
-
Operating and storage temperature-29 to +121 C
-
Relative humidityUp to 95%, noncondensing for this non-integral-cable option
-
Mounting torque5.6 N m for M10x1 base
-
Shock resistance50 g peak along the non-sensitive axis
View all additional
Alternative Names
9200-01-05-10-00 moving-coil velocity sensor
9200 Seismoprobe M10x1 terminal-block transducer
Self-powered 0-degree casing-vibration pickup
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
9200 AND 74712 SEISMOPROBE VELOCITY TRANSDUCERS
Absolute casing velocity measurement
The 9200 is a two-wire moving-coil transducer. It generates a voltage proportional to its own vibration velocity and does not require an external sensor power supply.
This option uses a top terminal block and requires separately provided field wiring. The circular M10x1 base must be mounted at the specified orientation on a suitable bearing housing, casing or structure.
Connect it to a compatible velocity channel or diagnostic instrument. The 10 kilohm calibration load and documented mounting conditions matter when interpreting its specified 20 mV/(mm/s) sensitivity.
Features:
- Measures absolute motion, not shaft-relative displacement
- Suitable for continuous or periodic measurements with compatible equipment
- Correct mounting location and orientation preserve measurement response
The Bently Nevada 9200-01-05-10-00 moving-coil velocity transducer requires the appropriate mounting, connections and configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Retain the complete 9200-01-05-10-00 configuration when checking a replacement. Its calibration angle, terminal-block connection, M10x1 base and absence of agency approvals are explicitly selected by the ordering code.
A different velocity-sensor technology is not automatically interchangeable. Verify power requirements, input loading, frequency and phase response, mounting arrangement and the relevant machine-protection settings before making a substitution.
The inspected manufacturer documents do not establish a discontinuation date or an exact direct successor for this reference. The 74712 high-temperature model is a separate ordering family and must not be substituted merely because it is shown in the same datasheet.
Features:
- Match the selected 0-degree calibration orientation
- Preserve terminal-block and M10x1 mounting compatibility
- Validate electrical and dynamic response before changing sensor technology
The Bently Nevada 9200-01-05-10-00 moving-coil velocity transducer requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikon-hosted reference packages, not direct manufacturer downloads. Refer to the applicable Bently Nevada documentation and supplied product identity before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the Bently Nevada 9200-01-05-10-00 moving-coil velocity transducer must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 9200-01-05-10-00
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Does 9200-01-05-10-00 require an external power supply?
No. Its moving-coil element generates a velocity-proportional voltage without external power. -
Can this option be mounted at any angle?
No. Option 01 is calibrated for 0 degrees within +/-2.5 degrees. Other orientation codes have different limits. -
Is a cable included in connector option 05?
No. Option 05 is a top-mounted terminal block without a cable. -
Which stud and tightening torque apply?
The circular base uses an M10x1 stud. The specified mounting torque is 5.6 N m. -
What input loading is used for calibration?
Sensitivity is specified with a 10 kilohm load between terminals A and B, under the stated temperature, vibration and orientation conditions. -
Does the 00 option include hazardous-area approvals?
No. It is the ordering option without approvals; certification of another 9200 variant cannot be transferred to this one. -
Is a Velomitor automatically a drop-in replacement?
No. Moving-coil and piezo-velocity devices differ in power, bandwidth, phase response and installation requirements. Match the complete measurement system before substitution.
READY TO VERIFY YOUR PART?
Get a 9200-01-05-10-00 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
